The million pixel 80m infrared network camera supports 24 hours of day and night monitoring, an infrared irradiation distance of 80m, MPEG4/MJPEG dual mode and dual stream, 10FPS@1280x1024, 30FPS@640x480, and supports 3GPP protocol to monitor by 3G mobile phone. Free 36-way recording software.
The CAM427M is a network surveillance camera featuring a 1/4" CMOS sensor with up to 130万像素, a varifocal 10‑40 mm F1.4 lens, and infrared illumination up to 80 m. It supports both wired power (DC 12 V 2 A or AC 24 V) and PoE (IEEE 802.3at) and is rated IP‑66 for outdoor use.
The manual lists video formats (MPEG‑4, MJPEG), resolutions from 1280×1024 to 160×120, and frame rates up to 10 fps at full resolution. It also covers audio input/output, motion detection zones, alarm settings, and network protocols such as HTTP, RTP/RTSP, and UPnP.
| CPU | ARM 9, 32‑bit RISC |
|---|---|
| RAM | 32 MB |
| Flash Memory | 8 MB |
| Lens | Varifocal 10‑40 mm, F1.4 |
| Minimum Illumination | 0 lux (infrared) |
| Infrared LEDs | 850 nm, 8 LEDs |
| IR Range | 80 m |
| Waterproof Rating | IP‑66 |
| Power Supply (CAM427M) | DC 12 V 2 A / AC 24 V |
| Power Supply (CAM427M‑PoE) | PoE (IEEE 802.3at) injector |
| Ethernet Interface | 10/100 Base‑T |
| Supported Video Resolutions | 1280×1024, 640×480, 320×240, 160×120 |
| Maximum Frame Rate | 10 fps @1280×1024, 30 fps @640×480 |
| Maximum Frame Rate (lower resolution) | 30 fps @640×480 |
| Motion Detection Zones | 3 zones |
| Simultaneous Connections | Up to 10 users |
The CAM427M can be powered by DC 12 V 2 A or AC 24 V, while the CAM427M‑PoE version uses a PoE injector compliant with IEEE 802.3at.
The camera supports up to 1280 × 1024 at 10 fps and 640 × 480 at 30 fps.
Yes, the camera has an IP‑66 waterproof rating.
It uses a varifocal 10‑40 mm lens with an aperture of F1.4.