Motor Over-temperature ï† indicates the motor has exceeded its temperature limit. The manual's first action is: “Check the following: 1. P0611 (motor ï† time constant) should be set to appropriate value 2. P0614 (Motor ï† overload warning level) should be set to suitable level 3. Are long periods of operation at low speed occurring 4. Check that boost settings are not too high”
- Model
- Siemens MICROMASTER 420
- Display shows
- Motor Over-temperature ï† (A0511)
- Type
- Warning code
- Source
- Manual p. 72
What A0511 means
Motor Over-temperature ï† p. 72
Common causes
- Motor overloaded p. 72
Safety warnings — read before you start
- DANGERDANGER. indicates an immiently hazardous situation which, if not avoided, will result in death or serious injury. p. 6
What to do
- Check the following: 1. P0611 (motor ï† time constant) should be set to appropriate value 2. P0614 (Motor ï† overload warning level) should be set to suitable level 3. Are long periods of operation at low speed occurring 4. Check that boost settings are not too high p. 72
If A0511 is still not resolved
The manual gives no further instruction for this code. Open the code table in the PDF or contact Siemens service.
This page summarises what the manufacturer’s manual says about A0511; each statement links to the page it comes from, and quoted lines are copied word for word. It is not a substitute for the manual or for a qualified installer. ManualLib is not affiliated with Siemens. Found a mistake? Report an error.