Panasonic FP0H Error Codes

77 codes from pages 114–208 of the manual

This is the list of error codes the Panasonic manual gives for the FP0H Panasonic FP0H. Find your code below and open it for what the manual says about its causes and what to do.

Error codes from p. 115

CodeWhat it meansPage
43 error code 43 or higher p. 115
0x0001 Hardware fault p. 184
0x0002 Memory usage fault p. 184
0x0003 Bus fault p. 184
0x0004 Usage fault p. 184
0x1001 Startup initialization timeout p. 184
0x2001 SSL/TLS initialization failed (API) p. 184
0x2002 SSL/TLS initialization failed (FTP server) p. 184
0x2003 SSL/TLS session generation failed (FTP server) p. 184
0x2004 SSL/TLS certificate reading failed (FTP server) p. 184
0x2006 SSL/TLS initialization failed (FTP client) p. 184
0x2007 SSL/TLS session generation failed (FTP client) p. 184
DT90591 Server certificate storage status p. 184
E1 Syntax error p. 204
E2 Duplicate use (definition) error p. 204
E3 Not paired error p. 204
E4 Parameter mismatch error p. 204
E5 Program area error (Note 1) p. 204
E6 Compile memory full p. 204
E7 High-level instruction type error p. 204
E8 High-level instruction operand combination error p. 204
E20 Watchdog timeout p. 205
E21 MAC address error C32ET/C32EP only p. 205
E22 SD host controller error p. 205
E26 User ROM error p. 205
E27 Restrictions on the number of units installed p. 205
E34 I/O status error p. 205
E40 I/O error p. 205
E41 Extra unit out of control p. 205
E42 I/O verification error p. 205
E43 Configuration data error/initialization request error p. 205
E44 Positioning operation error occurred p. 205
E45 Operation error occurred p. 206
E46 Network error occurred p. 206
E48 System register setting error p. 206
E50 Battery error (A battery comes off or the voltage drops.) p. 206
E51 RTC error p. 206
E58 Memory configuration inconsistency p. 206
E60 Logging setting mismatch (when loading logging settings from an SD card) p. 206
E61 Logging data error p. 206
E62 SNTP time acquisition failure p. 206
E63 Logging/trace registration error p. 206
E64 Incorrect project data p. 206
E65 Auto-run definition file error p. 206
E70 SD card copy failed: Cover opened p. 206
E71 SD card copy failed: No SD card p. 206
E72 SD card copy failed: SD card operation disabled. SD card reading error (FAT/File error) p. 206
E73 SD card copy failed: No file p. 207
E74 SD card copy failed: Password unmatched (Limited distribution function) p. 207
E75 SD card copy failed: Incorrect project data p. 207
E100 Self-diagnostic error set by F148 p. 207
E199 Self-diagnostic error set by F148 p. 207
E200 E200 p. 207
E299 E299 p. 207
126 Unit number setting error p. 208
140 BCC error p. 208
141 Format error p. 208
142 NOT support error p. 208
143 Multiframe process error p. 208
160 Parameter error p. 208
161 Data error p. 208
162 Registration over error p. 208
163 PC mode error p. 208
164 External memory error p. 208
165 Protection error p. 208
166 Address error p. 208
167 Missing program error/Missing data error p. 208
168 Rewriting is disabled while in RUN mode p. 208
171 Exclusive control error p. 208
178 No SD card error p. 208
180 Guarantee data abnormality error p. 208
181 No effective data error p. 208
190 Logging trace error p. 208
192 Unsupported SD card error p. 208
193 Server disabled error p. 208
194 Certificate writing error p. 208
197 Server connected error p. 208

Codes and descriptions are taken from the manufacturer’s manual; page numbers link to the PDF. ManualLib is not affiliated with Panasonic. Found a mistake? Report an error.