Test Report Code is sent periodically to verify communicator and phone line functionality, with frequency set via scheduling or key commands. The manual's first action is: “installer code + [#] + 0 + 0 = test report sent every 24 hrs installer code + [#] + 0 + 1 = test report sent once per week installer code + [#] + 0 + 2 = test report sent every 28 days Each of these modes sets schedule 32 (VISTA-20P) or 8 (VISTA-15P) to the stated repeat option; first test report sent 12 hours after command." UL: Required for UL commercial burglar alarm installations and required for residential fire alarm installations.”
- Model
- KOPPEL K5305-1V1
- Display shows
- Test Report Code (*64)
- Type
- Alarm code
- Source
- Manual p. 31
What *64 means
Test Report Code p. 31
Common causes
- Sent periodically to test that the communicator and phone lines are operational. Frequency of report is set in Scheduling mode (event 11) or by the following key commands: p. 31
What to do
- installer code + [#] + 0 + 0 = test report sent every 24 hrs installer code + [#] + 0 + 1 = test report sent once per week installer code + [#] + 0 + 2 = test report sent every 28 days Each of these modes sets schedule 32 (VISTA-20P) or 8 (VISTA-15P) to the stated repeat option; first test report sent 12 hours after command." UL: Required for UL commercial burglar alarm installations and required for residential fire alarm installations. p. 31
Before you service the product, read the safety instructions in the manual p. 83.
If *64 is still not resolved
The manual gives no further instruction for this code. Open the code table in the PDF or contact KOPPEL service.
This page summarises what the manufacturer’s manual says about *64; each statement links to the page it comes from, and quoted lines are copied word for word. It is not a substitute for the manual or for a qualified installer. ManualLib is not affiliated with KOPPEL. Found a mistake? Report an error.