Hobart Ecomax / Ecomax+ H604 / H614 / H615 Error 18: Filling monitoring by measuring the water level in the boiler

Dishwasher · taken from the manufacturer’s manual, pages cited

Error code18

The boiler’s water level was being monitored for correct fill status. The manual's first action is: “Check water supply.”

Model
Hobart Ecomax / Ecomax+ H604 / H614 / H615
Display shows
18
Type
Error code
Source
Manual p. 27

What 18 means

Filling monitoring by measuring the water level in the boiler p. 27

Common causes

  • Filling monitoring by measuring the water level in the boiler. p. 27

What to do

  1. Check water supply. p. 27

Before you service the product, read the safety instructions in the manual p. 5.

If 18 is still not resolved

  • Contact Hobart Service or an electrically qualified person trained by Hobart. p. 5
    “All modifications and alterations to the product are reserved for persons authorised by HOBART.”
  • Observe the regulations on occupational health and safety. p. 5
    “Observe the regulations on occupational health and safety .”
Open the manual at page 27 All Ecomax / Ecomax+ H604 / H614 / H615 error codes Manual details & download

This page summarises what the manufacturer’s manual says about 18; each statement links to the page it comes from, and quoted lines are copied word for word. It is not a substitute for the manual or for a qualified installer. ManualLib is not affiliated with Hobart. Found a mistake? Report an error.