Industrial

MAX4080/MAX4081 high-side current-sense amplifiers are high-voltage current-sense amplifiers with an input voltage range that extends from 4.5V to 76V making them ideal for telecom, automotive, backplane, and other systems where high-voltage cur- rent monitoring is critical

Vishay Semiconductors VLMK/R/Y71.. 1 Watt Power SMD LED is a high-power surface mount LED produced by Vishay. It features high brightness, 120 degrees wide viewing angle and ultra-low height. It is suitable for applications such as automotive signal lights, traffic signal lights and lighting.

The AP133 is a 300mA, adjustable output voltage, low dropout linear regulator with low dropout voltage and low quiescent current, it is suitable for battery powered devices.

The FAN2011/FAN2012 is a high-efficiency, low-noise synchronous PWM current mode buck regulator designed for low voltage applications. It features 95% efficiency, adjustable output voltage, 4.5V to 5.5V input voltage range, and up to 1.5A output current.

The AD73322 is a low-cost, low-power CMOS general-purpose dual analog front end. It features two 16-bit A/D converters, two 16-bit D/A converters, programmable input/output sample rates, 78 dB ADC SNR, 77 dB DAC SNR, and more.

The AD73311L is a low cost, low power CMOS general purpose analog front end with 16-bit analog to digital converter (ADC) and 16-bit digital to analog converter (DAC). The AD73311L has a flexible serial interface that allows up to eight devices to be connected in cascade and supports single (+3 V) supply operation.

Utilizing state of the art LED and packaging technology, CML introduces a device that has the appearance of an incandescent bulb whether it is day or night. The new Sixcess lamp replaces a traditional 6 Watt 6S6 candelabra bulb while consuming only 20% of the energy and lasting up to 20 times longer. It has a warm white color similar to the bulb it replaces. 12V and 24V versions are available. A new generation of lamp with long life expectancy, rugged solid-state construction for shock & vibration resistance, reduced running costs, low power consumption, reduced downtime, looks identical to 6S6 day or night, indoor or outdoor, sealed sockets. Patent pending.

AD73322L is a low-cost, low-power CMOS general-purpose dual analog front end.

This document introduces the TLV245x series of low-power switches. The main features are low supply current, high switching frequency, high output drive capability, and full voltage range input and output. It is suitable for portable medical equipment, patient monitoring systems and data acquisition circuits.

Littelfuse AC series and CG3 series two-electrode gas plasma arrester (GDT) products provide a high degree of surge protection in AC line applications. The two models, AC120 and AC240, are designed for use with 120VAC and 240VAC lines respectively. They are able to extinguish AC follow-on currents of at least 200A. Littelfuse CG3 series two-electrode high voltage (1.0 - 7.5 KV) devices are designed for surge protection and high isolation applications, and for applications for which bias voltages or signal levels of several hundred volts are normally present.

AD74111 is a low-cost, low-power mono audio codec that supports 8kHz to 48kHz sample rates and supports 16-/20-/24-bit word lengths.

The LM5022 is a high voltage low-side N-channel MOSFET controller ideal for use in boost and SEPIC regulators. It contains all of the features needed to implement single ended primary topologies. Output voltage regulation is based on current-mode control, which eases the design of loop compensation while providing inherent input voltage feed-forward. The LM5022 includes a start-up regulator that operates over a wide input range of 6V to 60V. The PWM controller is designed for high speed capability including an oscillator frequency range up to 2 MHz and total propagation delays less than 100 ns. Additional features include an error amplifier, precision reference, line under-voltage lockout, cycle-by-cycle current limit, slope compensation, soft-start, external synchronization capability and thermal shutdown. The LM5022 is available in the MSOP-10 package.

AD1835A is a 2 ADC, 8 DAC, 96 kHz, 24-Bit �-� Codecs product produced by Analog Devices Inc.

ADAV803 is an audio codec designed specifically for recordable DVD, supporting 48kHz/96kHz sampling rate, 102dB dynamic range, single-ended input, automatic level control.

This document describes the features and characteristics of the ADAV801 Rev. A audio codec. The codec supports 48 kHz/96 kHz sample rates and has a dynamic range of 102 dB. It includes a stereo analog-to-digital converter (ADC) and a stereo digital-to-analog converter (DAC) that support sample rates of 32 kHz/44.1 kHz/48 kHz/96 kHz/192 kHz and have a dynamic range of 101 dB. Additionally, it includes a stereo sample rate converter (SRC), digital interfaces, S/PDIF input and output, digital interface receiver and transmitter, as well as device control via an SPI-compatible serial port.