Industrial

The ADAU1328 is a high performance single-chip codec that provides two analog-to-digital converters (ADCs) with differential input and eight digital-to-analog converters (DACs), supporting 24 bits and 8 kHz to 192 kHz sample rates.

M93C86, M93C76, M93C66 M93C56, M93C46 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit (8-bit or 16-bit wide) MICROWIRE® Serial Access EEPROM is industry standard MICROWIRE Bus single supply voltage 4.5 to 5.5V dual organization by Word (x16) or Byte (x8) programming instructions work on Byte, Word or Entire Memory self-timed programming cycle with auto-erase ready/busy signal speed 1MHz Clock Rate, 10ms Write Time sequential read operation enhanced ESD/Latch-Up Behaviour more than 1 Million Erase/Write Cycles more than 40 Year Data Retention

Vishay Semiconductors VLMD31 series SMD LEDs feature exceptional brightness and reliability, and are widely used in automotive, communication, lighting and office equipment applications.

The AD1939 is a high performance, single-chip codec that provides four analog-to-digital converters and eight digital-to-analog converters, and can be used with a PLL or direct master clock.

The iButton is a high-performance, rugged, and rewritable non-volatile data storage device. It features 4096 bits of read/write non-volatile memory, 256-bit scratchpad, real-time clock/calendar, interval timer, programmable cycle counter, programmable alarms, write protect, programmable expiration date, a clock accuracy of ±2 minutes/month at 25°C, an operating temperature range of -40°C to +70°C, and over 10 years of data retention.

AD1938 is a high performance single-chip codec that provides four analog-to-digital audio channels and eight digital-to-analog audio channels, supports 192kHz sampling rate, supports 3.3V single-supply power supply, and an internal PLL clock generator. It supports a variety of interface modes and can be applied to automotive audio systems, home theater systems, set-top boxes and other scenarios.

The HCS301 from Microchip Technology Inc. is a code hopping encoder designed for secure Remote Keyless Entry (RKE) systems. It features a programmable 28-bit serial number, programmable 64-bit encryption key, unique transmission for each transmission, 66-bit transmission code length, 32-bit hopping code, and 34-bit fixed code.

This document introduces Cypress low-speed and full-speed M8 USB devices and provides a complete USB to serial bridge solution for replacing traditional RS-232 serial interfaces.

The THS413x is a fully-differential input/differential output device fabricated using Texas Instruments’ state-of-the-art BiComI complementary bipolar process. The THS413x is made of a true fully-differential signal path from input to output. This design leads to an excellent common-mode noise rejection and improved total harmonic distortion.

TCPT1200 is a miniature transmissive optical sensor with phototransistor output from Vishay Semiconductors. It features surface mount package, phototransistor detector, dimensions of 5 mm x 4 mm x 4 mm, gap of 2 mm, aperture of 0.3 mm, typical test current of 0.5 mA, emitter wavelength of 950 nm, lead (Pb)-free soldering released, lead (Pb)-free component in accordance with RoHS 2002/95/EC and WEEE 2002/96/EC standards, minimum order quantity of 2000 pcs, 2000 pcs/reel.

ISL6256, ISL6256A is a highly integrated battery charger from Intersil. It has automatic power source selection function and can be used to power notebook computers.

The 61 series of switches and indicators are modular in design and consist of an actuator and a switching element. The switching elements are available in a variety of types, including standard, forced-opening, slow-make, and screw terminal.

GSOT03C-HT3 to GSOT36C-HT3 are Two-Line ESD-Protection devices from Vishay Semiconductors with ESD-immunity acc. IEC 61000-4-2 ± 30 kV contact discharge ± 30 kV air discharge. The device is in space saving LLP package and is lead (Pb)-free. It is also in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC standards.

The LTC6900 is a precision, low power oscillator that is easy to use and occupies very little PC board space. The oscillator frequency is programmed by a single external resistor (RSET). The LTC6900 has been designed for high accuracy operation (≤1.5% frequency error) without the need for external trim components. The LTC6900 operates with a single 2.7V to 5.5V power supply and provides a rail-to-rail, 50% duty cycle square wave output. The CMOS output driver ensures fast rise/fall times and rail-to-rail switching. The frequency-setting resistor can vary from 10kΩ to 2

LTC2430/LTC2431 are 2.7V to 5.5V micropower 20-bit differential ∆Σ analog-to-digital converters with an integrated oscillator, 3ppm INL and 0.56ppm RMS noise. They use delta-sigma technology and provide single cycle settling time for multiplexed applications. Through a single pin, the LTC2430/LTC2431 can be configured for better than 110dB differential mode rejection at 50Hz or 60Hz ±2%, or they can be driven by an external oscillator for a user-defined rejection frequency. The internal oscil- lator requires no external frequency setting components. The converters accept any external differential reference voltage from 0.1V to VCC for flexible ratiometric and remote sensing measurement configurations. The full- scale differential input range is from –0.5VREF to 0.5VREF. The reference common mode voltage, VREFCM, and the input common mode voltage, VINCM, may be indepen- dently set anywhere within GND to VCC. The DC common mode input rejection is better than 120dB. The LTC2430/LTC2431 communicate through a flexible 3-wire digital interface that is compatible with SPI and MICROWIRE TM protocols.