Industrial

UL635H256 is a high-performance CMOS non-volatile static RAM with a storage capacity of 32768 x 8 bits, 35 and 45 ns access times, 8 mA ICC, and automatic store and recall functions. The product features a wide voltage range and high quality standards.

DATEL 3.3 Volts @ 30 Amps 100 Watt, DC/DC Converters Single Output UHP Models is a DATEL DC/DC converter for low-voltage/high-current applications. This converter uses a full-bridge, fixed-frequency topology with synchronous output rectification to achieve an efficiency of 89%. Additionally, the converter uses an open-frame package that allows unrestricted air flow, reducing internal component temperatures, allowing operation at elevated ambient temperatures. This DC/DC provides output trim, sense pins and primary side on/off control (available with positive or negative logic) or sync. Standard features also include input overvoltage and undervoltage shutdown circuitry, output overvoltage protection, output short-circuit and current limiting protection and thermal shutdown. All devices meet IEC950, UL1950 and EN60950 safety standards and carry CE certification.

This document describes the features and characteristics of the UF3A - UF3K series surface mount ultra-fast rectifiers, including glass passivated die construction, low forward voltage drop, high efficiency, surge overload rating up to 100A peak, low power loss, and ultra-fast recovery time.

The U2100B is a timer control circuit that uses bipolar technology. It has different mode selections (Zero voltage switch, Phase control, Relay control) and the output stage is triggered according to input conditions. It can be used as a power switch in triac applications for two or three wire systems.

The TSH6x series is a high performance video opamp which can be used alone or in cascade. It features high gain-bandwidth product, low distortion and high output current to provide excellent video quality driving standard 150ohm loads.

TS39300/1/2/3/4 are 3A ultra low dropout linear voltage regulators that provide low voltage, high current output with a minimum of external components. The TS3930x series offers extremely low dropout (typically 400mV at 3A) and low quiescent current (typically 36mA at 3A). TS39300/1/2/3/4 is ideal for PC add-in cards that need to convert from standard 3.3V to 2.5V or 2.5V to 1.8V. A guaranteed maximum dropout voltage of 500mV over all operating conditions allows the TS39300/1/2/3/4 to provide 2.5V from a supply as low as 3V, and 1.8V from a supply as low as 2.5V. The TS39300/1/2/3/4 also has fast transient response for heavy switching applications. The device requires only 47uF of output capacitor to maintain stability and achieve fast transient response. On the TS39300/1/2/3/4, the enable pin may be tied to input voltage if it is not required for enable control.

TS2576 is a switch regulator produced by Antai Technology. It has a load capacity of 3A and can output 3.3V, 5V, and adjustable output voltages in three versions. The switching frequency is 52kHz and it has an external shutdown function. The static current is 70μA.

TPS777xx and TPS778xx are designed to have a fast transient response and be stable with a 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost.

TPS73xx devices are members of a family of micropower low-dropout (LDO) voltage regulators

The TPS4005x is a family of high-voltage, wide input, synchronous, step-down converters suitable for automotive applications. It offers design flexibility with a variety of user programmable functions, including soft-start, UVLO, operating frequency, voltage feed-forward, high-side current limit, and loop compensation.

This document describes the features and characteristics of TPS2220A, TPS2223A, TPS2224A, and TPS2226A CardBus power-interface switches. These switches allow controlled distribution of 3.3V, 5V, and 12V voltage to each card slot and feature current-limiting and thermal protection.

the TPIC46L01, TPIC46L02, and TPIC46L03 are low-side predrivers that provide serial input interface and parallel input interface to control six external field-effect transistor(FET) power switches such as offered in the TI TPIC family of power arrays. These devices are designed primarily for low-frequency switching, inductive load applications such as solenoids and relays. Fault status for each channel is available in a serial-data port (SDA).

The TPA6043A4 is a stereo audio power amplifier and DirectPath™ headphone amplifier with fully differential architecture and high PSRR. It is capable of delivering 2W power continuously into 4-ohm loads at 5V voltage, and has a built-in 4-step gain control for the speaker amplifier and a fixed -1.5V/V gain for the headphone amplifier, minimizing the need for external components.