Industrial

VCX is the industry’s first low voltage logic family optimized for 2.5V performance. VCX provides the fastest 3.3V CMOS performance and the fastest 2.5V performance available. VCX is specified from 1.65V–3.6V, offering a broad operating range and provides over voltage tolerance to 3.6V for mixed voltage operation. VCX is ideal for high speed on-board buffering applications.

This document introduces the High Definition Articulating VideoScope Kit produced by FLIR Systems, Inc., including camera heads of different diameters and lengths, and related accessories. The products feature high-definition video quality, adjustable lens, and wireless connectivity.

This document describes the application background and features of FDDS100H06_F085 in automotive systems. FDDS100H06_F085 is a smart high-side switch designed to drive medium power electrical loads and provide diagnostic feedback with a microprocessor-compatible logic level interface.

This document introduces the features of Fairchild's various switch products, including standard, undervoltage protection, cascading, series resistance, and precharging.

This application note describes how to use high-speed CMOS ICs to design low-power logic circuits.

CMOS Oscillators INTRODUCTION This note describes several square wave oscillators that can be built using CMOS logic elements. These circuits offer the following advantages: Guaranteed startability Relatively good stability with respect to power supply variations Operation over a wide supply voltage range (3V to 15V) Operation over a wide frequency range from less than 1 Hz to about 15 MHz Low power consumption Easy interface to other logic families and elements in- cluding TTL Several RC oscillators and two crystal controlled oscillators are described. The stability of the RC oscillator will be suffi- cient for the bulk of applications; however, some applications will probably require the stability of a crystal. Some applica- tions that require a lot of stability are: 1. Timekeeping over a long interval. A good deal of stability is required to duplicate the performance of an ordinary wrist watch (about 12 ppm). This is, of course, obtain- able with a crystal. However, if the time interval is short and/or the resolution of the timekeeping device is rela- tively large, an RC oscillator may be adequate. For ex- ample: if a stopwatch is built with a resolution of tenths of seconds and the longest interval of interest is two min- utes, then an accuracy of 1 part in 1200 (2 minutes x 60 seconds/minute x 10 tenth/second) may be acceptable since any error is less than the resolution of the device. 2. When logic elements are operated near their specified limits

This document introduces the features and characteristics of the MM54HC/MM74HC family of high-speed logic components. This family of components offers a unique combination of speed and power characteristics that are not found in bipolar logic families or any other CMOS family. It has operating speeds similar to low power Schottky (54LS/74LS) technology, but is approximately half as fast as the 54ALS/74ALS and 54S/74S logic. Compared to CD4000 and 54C/74C, it provides an order of magnitude improvement in speed by utilizing an advanced 3.5 micron silicon gate-recessed oxide CMOS process. Additionally, the MM54HC/MM74HC family retains all the advantages of older metal gate CMOS and provides the functions and pin outs of the popular 54LS/74LS series logic components, as well as several special functions not previously implemented in CD4000 or 54LS/74LS.

MM74HC is a high-speed CMOS with high speed, low power consumption and strong anti-interference ability.

This document mainly introduces Fairchild's chip process optimization solution to eliminate CMOS SCR latch-up problem in 74HC logic.

The Extech Model 45158 Mini Hygro Thermo-Anemometer is a multi-function instrument that can simultaneously measure air velocity, humidity, dew point, and ambient temperature or temperature with wind-chill factor.

This is the user manual of Extech’s 45118 Mini Thermo- Anemometer, introducing the features and characteristics of the product

This document introduces the R1 Pocket Air Velocity meters product series from Extech Instruments Corporation in 2007-2008, including the Mini Thermo-Anemometer series and its accessories. The products feature a fold-up protective housing, a large dual display, data hold function, auto shutoff function, water-resistant housing, etc. The Mini Thermo-Anemometer series can measure air velocity, temperature, and windchill index, and Model 45158 also has the measurement function of relative humidity and dew point.

This document introduces the Heavy Duty Hot Wire CFM Thermo-Anemometer 407119 by Extech Instruments Corporation. The instrument accurately measures Air Flow (CFM/CMM) or Air velocity plus ºF/ºC Temperature. It features a telescoping probe that extends up to 3ft (9940mm) long and a Heavy Duty Hot Wire CFM Thermo-Anemometer. The instrument also has data record and recall functions, a large LCD display, and a built-in RS-232 PC interface with optional Data Acquisition software and cable.

This is a high temperature metal vane anemometer that can measure air flow (CFM) or air velocity and temperature. It is powered by a 9V battery and supports RS-232 PC serial interface. Optional data acquisition software is available