The Dell 5230/5350 Quick Reference Loading Paper and Specialty Media Loading the 250-sheet or 550-sheet Tray 1 Pull the tray out. Note: Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam. 2 Squeeze the width guide tab inward as shown, and move the width guide to the correct position for the paper size being loaded. 2 1 3 Unlock the length guide, squeeze the length guide tab inward as shown, and slide the guide to the correct position for the paper size being loaded. 3 1 2 Notes: • Use the size indicators on the bottom of the tray to help position the guides. • For standard paper sizes, lock the length guide. 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 5 Load the paper: • For single-sided printing, load the paper print side facedown with the leading edge of the paper toward the front of the tray. Note: For print jobs using an optional Staple Finisher, place the leading edge of the paper toward the back of the tray. • For two-sided or duplex printing, load the paper faceup with the leading edge of the paper toward the back of the tray. Note: For print jobs using an optional Staple Finisher, place the leading edge of the paper toward the front of the tray. Note: Notice the maximum fill line on the side of the tray which indicates the maximum height for loading paper. Do not overload the tray. 6 If necessary, adjust the paper guides to l
