RF Micro Devices Manuals

The RF3100-3 is a high-power, high-efficiency linear amplifier IC from RF Micro Devices targeting 3V hand-held systems. The device is manufactured on an advanced GaAs HBT process and has been designed for use as the final RF amplifier in dual-mode 3V CDMA hand-held digital cellular equipment, spread-spectrum systems, and other applications in the 1850MHz to 1910MHz band. The RF3100-3 has a digital control line for low power application to reduce the current drain. The device is self-contained with 50Ω input and output that is matched to obtain optimum power, effi- ciency, and linearity characteristics. The module is an ultra-small 6mmx6mm land grid array with backside ground.

The RF3100-2 is a high-power, high-efficiency linear amplifier module targeting 3V hand-held systems. The device is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as the final RF amplifier in dual- mode 3V CDMA/AMPS hand-held digital cellular equip- ment, spread-spectrum systems, and other applications in the 824MHz to 849MHz band. The RF3100-2 has a digital control line for low power application to reduce the current drain. The device is self-contained with 50Ω input and output that is matched to obtain optimum power, effi- ciency, and linearity characteristics. The module is an ultra-small 6mmx6mm land grid array with backside ground.

RF3000 is a monolithic CMOS baseband processor from RF Micro Devices, Inc. It is suitable for use in 11Mbps IEEE802.11b wireless LAN systems, and contains all functions required to convert a spread-spectrum signal to bit stream.

Introduces the RF300 and RF303 high repeatability broadband TO-5 relays produced by Teledyne Relays. The relay has the advantages of high repeatability, wider bandwidth, metal enclosure EMI shielding, ground pin option, high isolation and high anti-ESD

The RF2046 is a general purpose, low cost RF amplifier IC. The device is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily-cascadable 50Ω gain block. Applications include IF and RF amplification in wireless voice and data communication products operating in frequency bands up to 3000MHz. The device is self-contained with 50Ω input and output impedances and requires only two external DC biasing elements to operate as specified. With a goal of enhanced reliability, the extremely small Micro-X ceramic package offers significantly lower thermal resistance than similar size plastic packages.

This document introduces the QFMT5 and QFMR5 data link modules, which are miniature UHF radio modules that enable the implementation of a simple telemetry link up to 300 metres, and at data rates of up to 128Kbit/s.

The 008 range of general purpose radio receiver decoders. When used with a matching Keeloq Transmitter encoder, a complete Remote control system is generated. Each Rx decoder incorporates an 'easy learn' feature enabling it to learn the Transmitter encoder signature code as it is transmitted. Each 008 decoder is able to learn up to 50 individual Transmitter encoders (memorised even if the power is removed).

RF600E, RF600D are RF Solutions company's easy to use encoder and decoder I/C's. They are designed to achieve the maximum possible range from any radio / Infra Red transmitter receiver set. Unlike other encoder /decoder devices the RF600E/600D provide an unprecedented level of security which prevents copying or grabbing whist also obtaining optimum range from the transmitter and receiver.

This document is an introduction to the PIC C Compiler. The compiler is fully optimized for use with PIC microcontrollers and includes built-in functions that make software coding very easy. It integrates with MPLAB and other simulators/emulators for source-level debugging. The compiler also provides access to hardware through easy-to-use C functions, including timers, A/D conversion, E2 storage, SSP, PSP, I2C, and more. It supports inserting assembly code anywhere in the source and referencing C variables. The compiler automatically handles linking of multiple code pages and supports inline procedures. Constants (including strings and arrays) are saved in program memory. In summary, the compiler offers a fast method for generating efficient code and is easy to maintain.

This is a 12Vdc waterproof power supply with the model PSU-12V1AIN-IP-1. It features IP67 sealing, an 83 x 37 x 30mm small size, a 2.1mm female socket, 100-240Vac input, 12Vdc 1A output and a 3.3m cable.

RF controller produced by Shenzhen King-Star Technology Co., Ltd., the operating voltage is DC9/12/24V, the external dimensions are 95× 89× 26 mm, and the output is three CMOS open drain outputs. The connection mode is common anode and the rated load current is 4A per way. It adopts RF wireless remote control, the functions of each key on the remote control are as follows: key A: color selection function key, which can select different color changes, a total of 12 changes. Key B: each time you press, the change speed level increases by 1, a total of 125 levels. The key is pressed without moving, and the change speed level increases rapidly. Key C: each time you press, the change speed level decreases by 1, a total of 125 levels. The key is pressed without moving, and the change speed level decreases rapidly. Key D: in any state, you can turn on or off the controller output.