ATMEL Manuals

AT29C1024 is a 5-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 1 megabit of memory is organized as 65,536 words by 16 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 70 ns with power dissipation of just 330 mW. When the device is deselected, the CMOS standby current is less than 200 µA. The device endurance is such that any sector can typically be written to in excess of 10,000 times.

The AT24C128/256 is a 131,072/262,144-bit serial electrically erasable and programmable read only memory (EEPROM) organized as 16,384/32,768 words of 8 bits each.

U6803B is a triple driver with thermal monitoring.

The ATV750B is a high-performance and flexible high-density programmable logic device with twice the performance of most other 24-pin programmable logic devices. Increased product terms, sum terms, flip-flops and output logic configurations translate into more usable gates. High-speed logic and uniform, predictable delays guarantee fast in-system performance.

This document introduces the features and characteristics of AT49BV008A(T) and AT49BV8192A(T), including 2.7V to 3.6V read/write operation, fast read access time, internal erase/program control, sector architecture, fast sector erase time, byte/word programming, hardware data protection, DATA polling for end of program detection, and low power dissipation

The document describes the features and characteristics of the AT49BV8192 and AT49LV8192 flash memories, including low voltage operation, fast read access time, internal erase/program control, sector architecture, fast sector erase time, word-by-word programming, hardware data protection, etc.

The document describes the features and characteristics of the AT17LV series FPGA Configuration EEPROMs. It supports multiple operating voltages, can be programmed in-system via a two-wire bus, and is compatible with various FPGAs. The EEPROMs can be cascaded for read-back support and are manufactured using a low-power CMOS process. They offer programmable reset polarity and are available in different package options. The product features low-power standby mode, high reliability, and long data retention.

AT93C46/56/57/66 3-Wire Serial CMOS E2PROMs 1K (128 x 8 or 64 x 16) 2K (256 x 8 or 128 x 16) 4K (512 x 8 or 256 x 16) features low voltage and standard voltage operation, user selectable internal organization, 3-wire serial interface, 2 MHz clock rate (5V) compatibility, self-timed write cycle (10 ms max), high reliability endurance: 1 million cycles data retention: 100 years, automotive grade and extended temperature devices available, 8-pin PDIP, JEDEC SOIC, and EIAJ SOIC packages.

AT90CAN32/64 is a high-performance, low-power AVR® 8-bit microcontroller from Atmel

This document describes the pin configuration and features of a product in PLCC package. The product conforms to Intel LPC Interface Specification 1.0 and has 8M bits of flash memory for platform code/data storage. It supports automated byte-program and sector-erase operations. The product provides two configurable interfaces: Low Pin Count (LPC) Interface and Address/Address Multiplexed (A/A Mux) Interface. The LPC interface supports a 5-signal communication interface with read and write protection for each sector using software-controlled registers. It also includes general-purpose inputs (GPIs) for platform design flexibility. The A/A Mux interface supports fast on-board or out-of-system programming. The power supply specifications are VCC: 3.3V ± 0.3V and VPP: 3.3V and 12V for fast programming. The product is available in a 40-lead TSOP or 32-lead PLCC package, which is an industry-standard package.

The document describes the features and characteristics of the ATF20V8B high-performance CMOS programmable logic device (PLD), including industry-standard architecture, high-speed electrically erasable programmable logic devices, several power saving options, CMOS and TTL compatible inputs and outputs, etc.

AT25080A/160A/320A/640A is 8192/16384/32768/65536-bit serial electrically-erasable programmable read-only memory (EEPROM) with low power consumption and low operating voltage, which is suitable for automotive electronics applications.

AT49BV642D(T) is a 2.7-volt 64-megabit Flash memory with features such as single voltage operation, fast read/write speed, erase and program suspend capability.

AVR Dragon is a low-cost AVR development tool