Aeroflex Manuals

Key facts

Manuals

23

Models

7

Languages

EN

Last added

2026-10-03

Aeroflex models by category

Featured Aeroflex manuals

Aeroflex IFR 1000 User Manual

User Manual 1 pages · 106 KB · EN

This manual describes how to operate the Aeroflex IFR 1000 communications service monitor. It includes basic operating instructions, safety guidelines, and troubleshooting tips for users with no prior experience.

Key technical data are listed, such as the required power supplies and the recommended repair procedures. The document also points to online sources where the full manual can be downloaded.

Covers: Introduction · Safety Information · Operating Procedures · Technical Specifications · Repair and Servicing

Aeroflex 2309 Signal Analyzer Specification Sheet

Datasheet 8 pages · 861 KB · EN

The Aeroflex 2309 is a 100 MHz to 2.4 GHz FFT signal analyzer offering automated intermodulation measurement, true RMS power measurement up to 40 W, and fine level resolution of 0.0001 dB. It features a low‑phase‑noise local oscillator, high linearity, and a 1‑bit sigma‑delta converter for fast, accurate results.

The instrument provides multiple interfaces including GPIB, RS‑232, parallel printer port, and an Auxiliary I/O port for high‑speed data transfer to a PC via a National Instruments PCI‑6534 digital I/O card. Optional accessories such as the MIPlot software and various cables support external processing, reporting, and extended functionality.

Covers: Features · Performance · Specifications · Input/Output · Power and Dimensions · Accessories

Aeroflex 2975 Radio Test Set Operation Manual

User Manual 284 pages · 3 MB · EN

This manual covers safety and EMC requirements, proper grounding, ESD protection, and handling precautions for the 2975 Radio Test Set. It also lists the required warm‑up time, fuse specifications, and recommended accessories.

The document is organized into sections on description, operation, optional features, applications, remote commands, and system settings, with detailed specifications for frequency range, power output, amplitude, resolution, and accuracy.

Covers: Description · Operation · Optional Features · Applications · Remote Commands · System Settings

Latest Aeroflex manuals

• Aeroflex IFR 1000 User Manual

  User Manual 1 pages · 106 KB · EN

  The Aeroflex IFR 1000 User Manual provides operating procedures, safety information, and power specifications for the IFR 1000 series service monitor.

• Aeroflex 2309 Signal Analyzer Specification Sheet

  Datasheet 8 pages · 861 KB · EN

  The Aeroflex 2309 Signal Analyzer specification sheet details its 100 MHz‑2.4 GHz frequency range, high dynamic range, and extensive interface options.

• Aeroflex 2975 Radio Test Set Operation Manual

  User Manual 284 pages · 3 MB · EN

  The Aeroflex 2975 Radio Test Set Operation Manual provides safety guidelines, specifications, and step‑by‑step instructions for using the instrument.

• AEROFLEX XPDR/DME/TCAS/ADS-B/TIS/TIS-B Test Set IFR 600 Manual

  This document describes the features and characteristics of the 1285T series magnetic contacts, including closed loop and open loop configurations, gap distances, surface mount with screw terminals, colors, UL and ULC listings.

• AEROFLEX ACT-S123K32 High Speed 4 Megabit SRAM Multichip Module

  S128K32 is a High Speed 4 megabit CMOS SRAM Multichip Module (MCM) designed for full temperature range, military, space, or high reliability mass memory and fast cache applications.

• AEROFLEX ACT-S512K32V High Speed 3.3Volt 16 Megabit SRAM Multichip Module

  Aeroflex Circuit Technology - Advanced Multichip Modules SCD3360 REV B 12/17/98 is a High Speed 4 megabit CMOS SRAM Multichip Module (MCM) designed for full temperature range, 3.3V Power Supply, military, space, or high reliability mass memory and fast cache applications. It has access time grades of 17ns, 20ns, 25ns, 35ns and 45ns maximum and works within the temperature range of -55°C to +125°C.

• AEROFLEX ACT E128K32 High Speed 4 Megabit EEPROM Multichip Module handbook

  The ACT-E128K32 is a high speed, 4 megabit, CMOS EEPROM multichip module (MCM) designed for full temperature range military, space, or high reliability applications.

• AEROFLEX Standard Products UT28F256 Radiation-Hardened 32K x 8 PROM Data Sheet

  UT28F256 is a high performance, asynchronous, radiation-hardened, 32K x 8 programmable memory device.

• AEROFLEX ACT S512K8 High Speed 4 Megabit Monolithic SRAM

  ACT-S512K8 is a 4Mbit low power CMOS monolithic SRAM manufactured by Aeroflex. It supports five access time grades of 17ns, 20ns, 25ns, 35ns, 45ns and 55ns maximum, works under a temperature range of -55°C to +125°C and supports military environments.

• AEROFLEX ACT F128K8 High Speed 1 Megabit Monolithic FLASH

  The ACT-F128K8 is a high-speed CMOS monolithic Flash module designed for full temperature range military, space, or high reliability applications. It features low power consumption, TTL compatible inputs and CMOS outputs, various access time options, +5V programming and supply, support for full chip erase, etc.

• Aeroflex ACT F512K32 High Speed 16 Megabit FLASH Multichip Module

  The ACT-F512K32 is a high speed, 16 megabit CMOS flash multichip module (MCM) designed for full temperature range military, space, or high reliability applications. The MCM can be organized as a 512K x 32bits, 1M x 16bits or 2M x 8bits device and is input TTL and output CMOS compatible. The command register is written by bringing WE to a logic low level (VIL), while CE is low and OE is at logic high level (VIH). Reading is accomplished by chip Enable (CE) and Output Enable (OE) being logically active, see Figure 9. Access time grades of 60ns, 70ns, 90ns, 120ns and 150ns maximum are standard. The ACT-F512K32 is packaged in a hermetically sealed package.

• AEROFLEX Standard Products UT54LVDS032 Quad Receiver Data Sheet

  The UT54LVDS032 is the companion product to the UT54LVDS031, a quad CMOS differential line receiver designed for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 155.5 Mbps (77.7 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology. The UT54LVDS032 accepts low voltage (340 mV) differential input signals and translates them to 5V TTL output levels. The receiver supports a three-state function that may be used to multiplex outputs. The receiver also supports OPEN, shorted and terminated (100 Ω) input fail-safe. Receiver output will be HIGH for all fail-safe conditions.

• AEROFLEX UT80CRH196KD Microcontroller Datasheet

  This document introduces a 20MHz 16-bit microcontroller compatible with the industry standard MCS-96 instruction set. It features a register-to-register architecture, 1000-byte register RAM, three 8-bit I/O ports, an on-board interrupt controller, three pulse-width modulated outputs, high-speed I/O, a UART serial port, a dedicated baud rate generator, and software and hardware timers. The microcontroller is built using radiation-hardened process and design, with the ability to withstand ionizing dose and charged particles. It also includes error detection and correction for external memory accesses and is compliant with QML Q and QML V standards.

• AEROFLEX UT54LVDS032 Quad Receiver Data Sheet

  UT54LVDS032 is a high performance, low power LVDS receiver from UT company, supporting 155.5Mbps data rate.

• AEROFLEX CT2553/2554/2555/2556 Advanced Integrated MUX (AIM) Hybrid FOR MIL-STD-1553

  Aeroflex CT2553 is a MIL-STD-1553 Bus Controller (BC), Remote Terminal Unit (RTU) and Bus Monitor (MT) device. It features dual low-power transceivers, complete BC/RTU/MT protocol logic, MIL-STD-1553 to host interface unit and 8K x 16 RAM.

Which document do I need?

Questions answered in Aeroflex manuals