Philips manuals, page 53
PHILIPS PUMD12 NPN/PNP resistor-equipped transistor handbook
PUMD12 is a NPN/PNP transistor produced by PHILIPS. It has different polarities, built-in bias resistors R1 and R2 (typical 47 kΩ each), and the two transistors do not interfere with each other. It simplifies circuit design and reduces the number of components and board space.
PHILIPS PUMD10 NPN/PNP resistor-equipped transistors handbook
This document is about the product specification of PUMD10 NPN/PNP resistor-equipped transistors. The device features transistors with different polarity and built-in bias resistors R1 and R2, which simplifies circuit design and reduces the number of components and board space.
PHILIPS PEMB9; PUMB9 PNP/PNP resistor-equipped transistors handbook
PEMB9; PUMB9 are PNP/PNP transistors with built-in bias resistors produced by PHILIPS company. It has the advantages of simplified circuit design, reduced component count and reduced pick and place costs.
PHILIPS PUMB2 PNP resistor-equipped double transistor handbook
PHILIPS PUMB3 PNP resistor-equipped double transistor handbook
PUMB3 is a PNP double transistor with built-in bias resistor R1 (typ. 4.7 kΩ) produced by PHILIPS, widely used in general-purpose switching and amplification, inverter and interface circuits, circuit driver and other applications.
PHILIPS PUMB4 PNP resistor-equipped double transistor handbook
PUMB4 is a PNP double transistor produced by Philips. It has a built-in bias resistor R1 and no mutual interference between transistors. It can simplify circuit design, reduce components and board space.
PHILIPS PEMB14; PUMB14 PNP/PNP resistor-equipped transistors handbook
The document describes the product overview, features, and applications of PNP/PNP resistor-equipped transistors. The product features built-in bias resistors, simplifies circuit design, reduces component count, and reduces pick and place cost.
PHILIPS PEMB13; PUMB13 PNP/PNP resistor-equipped transistors handbook
PEMB13 and PUMB13 are PNP/PNP transistors produced by PHILIPS with built-in bias resistors, which simplify circuit design, reduce component count and reduce pick and place costs.
PHILIPS PUMB11 PNP resistor-equipped double transistor handbook
The PUMB11 is a PNP transistor from Philips Semiconductors that has built-in bias resistors R1 and R2 (typical 10 kΩ each) that eliminate the need for external resistors, simplifying circuit design and reducing component count and board space. It is particularly suitable for space reduction in interface and driver circuits, and for inverter circuit configurations that do not require external resistors.
PHILIPS PCA84C122; 222; 422; 622; 822 8-bit microcontrollers for remote control transmitters handbook
This document is the technical manual of the Philips Semiconductors PCA84C122; 222; 422; 622; 822 8-bit microcontrollers, which provides detailed information on the product's features and characteristics, including memory, I/O, interface, interrupt, output driver, watchdog timer, etc.
PHILIPS PCA82C252 Fault-tolerant CAN transceiver handbook
PCA82C252 is a fault-tolerant CAN transceiver for in-car low-speed communication. It supports up to 125 kBaud, up to 15 nodes connection, unshielded bus wires, and has low RFI due to built-in slope control function and fully integrated receiver filters.
PHILIPS PCA82C251 CAN transceiver for 24 V systems handbook
PHILIPS PCA82C250 CAN controller interface handbook(2)
The PCA82C250 is a CAN controller interface that is fully compatible with the ISO 11898 standard and offers a high speed of up to 1Mbaud. It supports transient protection in automotive environments, a wide common-mode range for high immunity against ElectroMagnetic Interference (EMI), thermal protection, short-circuit proof to battery and ground, low-current standby mode, and the ability to connect at least 110 nodes.
PHILIPS PCA82C250 CAN controller interface handbook(1)
The PCA82C250 is a high-performance CAN controller interface for automotive environments that has the following features: full compatibility with ISO 11898 standard, high speed (up to 1 Mbaud), bus lines protected against transients in an automotive environment, slope control to reduce Radio Frequency Interference (RFI), wide common-mode range differential receiver for high immunity against ElectroMagnetic Interference (EMI), thermal protection, short-circuit proof to battery and ground, low-current standby mode, an unpowered node does not disturb the bus lines, at least 110 nodes can be connected
PHILIPS 82C200 handbook
Query PCA82C200N suppliers