STMicroelectronics manuals, page 220
ST EVALSPEAr320CPU handbook
ST STEVAL-ILL030V1 handbook
The STEVAL-ILL030V1 is a LED lighting control demonstration board based on STM32F103C6 and STCS1A, using the DMX512 communication protocol demonstration firmware. The board has jumper settings to configure different operating modes and dimming control of the on-board LEDs. It also features over/undervoltage protection and advanced USB protection using ESD protection devices.
ST STM8A/128-EVAL handbook
The STM8A/128-EVAL evaluation board is designed as a complete development platform for the STM8 core-based STM8AXX microcontroller with CAN2.0A/B compliant interface, I2C, SPI, two UART channels with smartcard, IrDA and LIN support, internal 2 Kbyte data Flash and 128 Kbyte Flash program memory, SWIM debugging support.
ST STM32W-SK STM32W-EXT handbook
STM32W108xx starter and extension kits with 32-bit ARM® Cortex™-M3 microprocessor and 2.4 GHz, IEEE 802.15.4-compliant transceiver
ST STM3210B-MCKIT handbook
The STM3210B-MCKIT motor control starter kit provides a complete development platform with all the hardware and software required to get STM32-based motor control applications started quickly, and shortens time to market by allowing developers to apply what they learn in the evaluation phase to real-world applications. The kit comes ready-to-run with a PMSM motor or an AC induction motor.
ST STEVAL-IHT001V1 handbook
ST STEVAL-ILB001V2 handbook
The STEVAL-ILB001V2 is a 36W - 220V AC low-cost high-frequency ballast demonstration board using the bipolar solution for power factor correction (PFC). The demonstration board is a complete reference system for a simple, cost-effective PFC for low-to-medium power high-frequency ballasts. The proposed bipolar PFC solution targets the low-cost high-frequency ballast market up to 80W, providing a simple and cost-effective solution without sacrificing total harmonic distortion (THD) and power factor (PF) levels. No additional integrated circuits (ICs) are required for the pulse-width modulation (PWM) signal, as the device uses only a power bipolar transistor and closed-loop feedback for duty cycle modulation and output power regulation. The active PFC solution with bipolar transistor adopts the boost topology and operates in discontinuous-conduction mode.
ST STEVAL-IFV002V1 handbook
The STEVAL-IFV002V1 extension board is based on STM32F107VC microcontroller and is used to interface a CAMERA board to the STM3210C-EVAL demonstration board.
ST STEVAL-ISA011V1 handbook
This datasheet introduces the STEVAL-ISA011V1 low power AC/DC adapter demonstration board, including features, specifications, applications, etc.
ST EVALSPEAr300 handbook
EVALSPEAr300 is a STMicroelectronics evaluation board for SPEAr300 embedded MPU.
ST EVALSPEAr310 handbook
The EVALSPEAr310 evaluation board allows you to quickly evaluate and debug software for the SPEAr310.
ST EVALSPEAr320PLC handbook
EVALSPEAr320PLC evaluation board is designed for SPEAr320 microprocessor evaluation and especially its media independent interface (MII) automation mode. The board consists of two boards: CPU board and application board. The CPU board contains SPEAr320 microprocessor, memory, serial port, USB and JTAG debug interface. The application board contains Ethernet, CAN, RS-232 and RS-485 interface, digital input output interface, analog input interface, expansion connector, DC/DC converter, MicroSD card socket, LED, buttons and reset button.
ST EVALSPEAr600 handbook
EVALSPEAr600 evaluation board is designed for SPEAr600 embedded MPU. It provides a platform to quickly evaluate and debug SPEAr600 software, and also acts as a learning tool to get familiar with SPEAr600 features, and a reference for the development of the final application board.
ST STEVAL-ISA042V2 handbook
This data brief introduces the features of the STEVAL-ISA042V2 1.5 A / 3.3 V step-down DC-DC converter demonstration board.
ST ANT1-M24LR-A handbook
The ANT1-M24LR-A is a 45mm x 75mm antenna reference board for evaluating the performance and capabilities of the M24LR64-R Dual Interface EEPROM IC, and to assist designers in getting started with their design.