STMicroelectronics Manuals

The TSV91x and TSV91xA series single, dual, and quad rail-to-rail input/output operational amplifiers offer low input bias current, low input offset voltage, high output current, wide bandwidth, and high gain-bandwidth product, making them ideal for battery-powered and portable applications such as sensor interfaces, signal conditioning, active filtering, medical instrumentation, and automotive applications.

TS3021 is a high-speed comparator with a propagation delay of 38ns, low current consumption of 73μA, supply operation from 1.8V to 5V, wide temperature range from -40°C to +125°C, high ESD tolerance of 5kV, and latch-up immunity of 200mA.

TSH6x series operational amplifiers feature high video performances, and they are suitable for applications such as TVs, DVD players and recorders. It supports single voltage supply with voltage range from 5V to 12V. The output voltage swing and output current capability are large, which can drive standard 150Ω loads. The TSH61 and TSH63 also feature standby inputs, which allow the op amps to be put into a standby mode with low power consumption and high output impedance. TSH6x series is proposed in standard SO8 and SO14 packages, which make it easier to integrate into video applications.

The document describes the features of the TSH344, a triple single-supply video buffer with a bandwidth of 340MHz. It operates on a 5V single supply and guarantees a low output rail of maximum 60mV. The buffer has an internal gain of 6dB to ensure matching between its three channels. It offers very low harmonic distortion and a slew rate of 740V/ms. It is specified for 150Ω and 100Ω loads and has been tested on a 5V power supply. The document also provides information on using the TSH344 as an RGB driver for video DAC output on a video line. The TSH344 is available in the compact SO8 plastic package for space-saving.

The TSH343 is a triple single-supply video buffer featuring an internal gain of 6dB and a large 280MHz bandwidth. It is suitable for high-end video systems, high definition TV (HDTV), broadcast and graphic video, etc.

The LMV321, LMV358, LMV324 are a series of low-cost, low-power, input/output rail-to-rail operational amplifiers. They are suitable for battery-powered and portable equipment applications.

TSV321-TSV358-TSV324 are low voltage versions of the LM358 and LM324 commodity operational amplifiers, capable of operating with voltages as low as 2.5V and feature both I/O rail-to-rail

TSH341 is a single supply operational amplifier from TI. It features a bandwidth of 300MHz, low quiescent current of 9.8mA, low input and output voltage range, very low harmonic distortion, and large output swing. It is suitable for driving video signals. The product is available in SOT23-5 and SO8 packages.

This document describes the TSH340 single supply voltage video buffer. Its features include a bandwidth of 320MHz, low harmonic distortion, low input and output rail, a slew rate of 780V/µs, voltage input noise of 7nV/√Hz, etc. It has an internal gain of 6dB, is specified for 150Ω and 100Ω loads, and is compatible with the PCB layout of a single op-amp. The product is tested on a 5V power supply.

The TSH330 is a current feedback operational amplifier using a very high-speed complementary technology to provide a large bandwidth of 1.1GHz in gain of 2 while drawing only 16.6mA of quiescent current. In addition, the TSH330 offers 0.1dB gain flatness up to 160MHz with a gain of 2. With a slew rate of 1800V/µs and an output stage optimized for driving a standard 100Ω load, this device is highly suitable for applications where speed and low-distortion are the main requirements. The TSH330 is a single operator available in the SO8 plastic package, saving board space as well as providing excellent thermal and dynamic performances.

LM124W-LM224W-LM324W Low Power Quad Operational Amplifiers have a wide gain bandwidth of 1.3MHz, an input common-mode voltage range that includes ground, a large voltage gain of 100dB, very low supply current/ampli of 375µA, low input bias current of 20nA, low input offset voltage of 3mV max., low input offset current of 2nA, wide power supply range of Single supply: +3V to +30V Dual supplies: ±1.5V to ±15V.

TJM4558 is a high performance monolithic dual operational amplifier that combines all the outstanding features of the MC1458 and, in addition possesses three times the unity gain bandwidth of the industry standard.

LM2902W is a low-power quad operational amplifier launched by ST, which has wide bandwidth gain, input common-mode voltage range includes negative rail, large voltage gain, low supply current, low input bias current, low input offset current, ESD internal protection, wide power supply range, single supply, dual supplies.

LM2904W Low power dual operational amplifier datasheet