STMicroelectronics Manuals

This document is about the SPBT2532C2.AT module, which is a micro-sized Bluetooth module with high performance. It supports Bluetooth 2.1 protocol, output power class 2, transmission speed up to 2Mbps. It supports various communication interfaces, including UART, I/O, etc.

SPZB260-PRO is a low power consumption ZigBee® module optimized for embedded applications. It enables OEMs to easily add wireless capability to electronic devices. The module is based on SN260 ZigBee® network processor which integrates a 2.4 GHz, IEEE 802.15.4-compliant transceiver as well as IEEE 802.15.4 PHY and MAC. 24 MHz high stability crystal is integrated in the module to perform the timing requirements as per ZigBee.

The TN100 is a high-performance CSS transceiver with location awareness capability. It is a single-chip solution for ISM 2.45 GHz RF transceiver, with built-in ranging capability for link distance estimation. It supports modulation technique: chirp spread spectrum (CSS), FDMA support: 7 channels, 3 non-overlapping, and data rates: 2 and 1 Mbps; 500, 250 and 125 kbps. It has adjustable output power and high precision ranging capability, supports external power amplifier to increase output power. The supply voltage range is from 2.3 V to 2.7 V, and it operates in an industrial temperature range from -40°C to +85°C.

This is a 350-400MHz FSK/ASK receiver that has multichannel, high dynamic range, PLL and VCO integration, image rejection mixer integration, Start Code Detector block (SCD), I2C serial interface, etc.

SPZB250 is a low power consumption ZigBee module based on EM250 ZigBee system-on-chip which integrates a 16-bit processor together with a 2.4 GHz, IEEE 802.15.4-compliant transceiver as well as IEEE 802.15.4 PHY and MAC. It enables OEMs to easily add wireless networking capability to any electronic device. Such a module is a very comprehensive solution to build wireless sensors with meshing and self-healing capability as required in a WSN scenario.

STW81103 is an integrated RF synthesizer with voltage controlled oscillators (VCOs) from STMicroelectronics. It features high performance, high integration, low power, and multi-band performances, making it a low cost, high performance, multi-band RF synthesizer.

This document describes how to program ST7 series microcontrollers through JTAG and bootstrap loader.

The ST7538Q is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications.

The ST7540 is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications. It operates from a single supply voltage and integrates a line driver and two linear regulators for 5V and 3.3V.

ST7 FAMILY PROGRAMMING MANUAL, introduces the ST7 series microcontrollers' architecture, functions and usage methods. The ST7 series microcontrollers are based on an industry-standard 8-bit core and a library of peripheral modules, including ROM, EPROM, RAM, EEPROM, I/O, serial interfaces (SPI, SCI, I2C,.), 16-bit timers, etc. These blocks can be assembled in various combinations in order to provide cost-effective solutions for application dedicated products.

STW81102 is a multi-band RF frequency synthesizer with integrated VCOs and integer-N frequency synthesis. It features dual differential integrated VCOs, automatic center frequency calibration, fast lock time, and is suitable for 2.5G and 3G cellular infrastructure equipment, CATV equipment, instrumentation and test equipment, and other wireless communication systems.

STW81101 is a multi-band RF frequency synthesizer with integrated VCOs. It features an integer-N frequency synthesizer, dual differential integrated VCOs with automatic center frequency calibration, excellent integrated phase noise, fast lock time, and more.

The STLC3075 is a SLIC device specifically designed for WLL (Wireless Local Loop), ISDN terminal adaptors, and VoIP applications. One distinctive characteristic of this device is its ability to operate with a single supply voltage (from +4.5 V to +12 V) and to self-generate the negative battery by means of an on-chip DC/DC converter controller that drives an external MOS switch. The battery level is properly adjusted depending on the operating mode. A useful characteristic for these applications is the integrated ringing generator. The control interface is parallel with open-drain output and 3.3 V logic levels. The device also includes features such as a programmable off-hook detector threshold, metering pulse generation and filter, integrated thermal protection, and a dual gain value option.

This document introduces the features and applications of the TSH512 Hi-fi stereo/mono infrared transmitter and stereo sub-carrier generator

The STLC3055N is a SLIC device specifically designed for wireless local loop (WLL) and ISDN- terminal adaptors (ISDN-TA) and VoIP applications. It has a single supply voltage (from 5.5 V to 12 V), self generate the negative battery by means of an on chip DC/DC converter controller that drives an external MOS switch.