National Semiconductor manuals, page 50
NATIONAL SEMICONDUCTOR ADC121S021 Single Channel 50 to 200 ksps 12-Bit A/D Converter Manual
The ADC121S021 is a single channel, 50 to 200 ksps, 12-bit A/D converter from ADI with high performance, low power consumption and multiple interfaces.
NATIONAL SEMICONDUCTOR LP3982 Micropower Ultra Low-Dropout Low-Noise 300mA CMOS Regulator Manual
The LP3982 is a micropower, ultra low-dropout, low-noise CMOS linear regulator available in various voltage versions. It provides an output current of 300mA. The LP3982 is suitable for battery-powered applications due to its low shutdown current, low quiescent current, and low dropout voltage. It features stable operation with small ceramic capacitive loads, high power supply rejection ratio (PSRR), wide input voltage range, fast turn-on time, low output voltage noise, and over temperature/over current protection.
NATIONAL SEMICONDUCTOR LMH6738 Manual
The LMH6738 is a very wideband, low distortion triple op amp. It is specifically designed for ultra high resolution video systems as well as wide dynamic range systems requiring exceptional signal fidelity.
NATIONAL SEMICONDUCTOR LM1575/LM2575/LM2575HV Manual
lm2575 is a 1a adjustable output voltage simple switch regulator
NATIONAL SEMICONDUCTOR LMC7221 Tiny CMOS Comparator Manual
The LM7221 is a micropower CMOS comparator available in the space saving 5-Pin SOT23 package. This makes this comparator ideal for space and weight critical designs. The LMC7221 is also available in the 8-Pin SOIC package. The LMC7221 is supplied in two offset voltage grades, 5 mV and 15 mV. The open drain output can be pulled up with a resistor to a voltage which can be higher or lower than the supply voltage—this makes the part useful for mixed voltage sys- tems. For a tiny comparator with a push-pull output, please see the LMC7211 datasheet.
NATIONAL SEMICONDUCTOR -DAC128S085 12-Bit Micro Power OCTAL Digital-to-Analog Converter with Rail-to-Rail Outputs handbook
The DAC128S085 is a 12-bit micro power octal digital-to-analog converter with rail-to-rail outputs, which can operate from a single +2.7V to +5.5V supply and consumes only 1.95 mW of power.
NATIONAL SEMICONDUCTOR - DAC108S085 10-Bit Micro Power OCTAL Digital-to-Analog Converter with Rail-to-Rail Outputs handbook
The DAC108S085 is a full-featured, general purpose OCTAL 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to +5.5V supply and consumes 1.95 mW at 3V and 4.85 mW at 5V. The DAC108S085 is packaged in a 16-lead LLP package and a 16-lead TSSOP package. The LLP package makes the DAC108S085 the smallest OCTAL DAC in its class. The on-chip output amplifiers allow rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces. The DAC108S085 also offers daisy chain operation where an unlimited number of DAC108S085s can be updated simultaneously using a single serial interface. There are two references for the DAC108S085. One reference input serves channels A through D while the other reference serves channels E through H. Each reference can be set independently between 0.5V and VA, providing the widest possible output dynamic range. The DAC108S085 has a 16-bit input shift register that controls the mode of operation, the power-down condition, and the DAC channels' register/output value. All eight DAC outputs can be updated simultaneously or individually.
NATIONAL SEMICONDUCTOR -LMS485E Low Power RS-485 RS-422 Differential Bus Transceiver handbook
Low power RS-485 / RS-422 differential bus transceiver.
National Semiconductor ADC128S022 8-Channel 50 kSPS to 200 kSPS 12-Bit A/D Converter handbook
NATIONAL SEMICONDUCTOR - LP3905 Power Management Unit For Low Power Handheld Applications handbook
LP3905 is a multi-functional Power Management Unit, optimized for low power handheld applications. This device integrates two 600mA DC/DC buck regulators and two 150mA linear regulators. Fixed and adjustable buck output versions are available. The LP3905 additionally features two enable pins for the device output control and is offered in an LLP package.
NATIONAL SEMICONDUCTOR LP2983 Manual
NATIONAL SEMICONDUCTOR -ADC081S051 Single Channel 200 to 500 ksps 8-Bit A/D Converter handbook
The ADC081S051 is a low-power, single channel CMOS 8-bit analog-to-digital converter with a high-speed serial interface. It is fully specified over a sample rate range of 200 ksps to 500 ksps and is based on a successive-approximation register architecture with an internal track-and-hold circuit. The output serial data is straight binary and compatible with several standards. The ADC081S051 operates with a single supply ranging from +2.7V to +5.25V. Power consumption ranges from 1.6 mW to 8.5 mW depending on the supply voltage. The power-down feature reduces power consumption to as low as 2.6 µW. The ADC081S051 is available in 6-lead LLP and SOT-23 packages and is suitable for operation over the industrial temperature range of -40°C to +85°C.
NATIONAL SEMICONDUCTOR - LM2597/LM2597HV SIMPLE SWITCHER Power Converter 150 kHz 0.5A Step-Down Voltage Regulator with Features handbook
LM2597/LM2597HV SIMPLE SWITCHER® Power Converter 150 kHz 0.5A Step-Down Voltage Regulator is a switching power supply IC with adjustable output voltage and can be equipped with different external components.
NATIONAL SEMICONDUCTOR ADC124S021 Manual
The ADC124S021 is a low-power, four-channel CMOS 12-bit analog-to-digital converter with a high-speed serial interface. Unlike the conventional practice of specifying performance at a single sample rate only, the ADC124S021 is fully speci- fied over a sample rate range of 50 kSPS to 200 kSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept up to four input signals at inputs IN1 through IN4. The output serial data is straight binary, and is compatible with several standards, such as SPI™, QSPI™, MICROW- IRE, and many common DSP serial interfaces. The ADC124S021 operates with a single supply that can range from +2.7V to +5.25V. Normal power consumption using a +3V or +5V supply is 2.2 mW and 7.9 mW, respec- tively. The power-down feature reduces the power consump- tion to just 0.14 µW using a +3V supply, or 0.32 µW using a +5V supply. The ADC124S021 is packaged in a 10-lead MSOP package. Operation over the industrial temperature range of −40˚C to +85˚C is guaranteed.
NATIONAL SEMICONDUCTOR -LM4550B AC 97 Rev 2.1 Multi-Channel Audio Codec with Stereo handbook
The product is an audio codec that can provide 18-bit Sigma-Delta ADCs and DACs, providing 90dB of dynamic range. The product is designed specifically for PC audio systems, with full duplex stereo ADCs and DACs and analog mixers that can access 4 stereo and 4 mono inputs. Each mixer input has separate gain, attenuation and mute control, and the mixers drive 1 mono and 2 stereo outputs, each with attenuation and mute control. The product also supports National’s 3D Sound stereo enhancement and a comprehensive sample rate conversion capability. The ADCs and DACs’ sample rates can be programmed separately with a resolution of 1Hz to convert any rate in the range 4kHz-48kHz. ADCs’ sample timing and DACs’ sample request timing are completely deterministic to ease task scheduling and application software development. These features and the extended temperature range also make the LM4550B suitable for non-PC codec applications. The product has the ability to connect multiple codecs together in a system to provide up to 6 equivalent stereo audio channels.