National Semiconductor manuals, page 26
National Semiconductor DAC0808/DAC0807/DAC0806 8-Bit D/A Converters handbook (1)
The document introduces the DAC0808 series, an 8-bit monolithic digital-to-analog converter (DAC), which features a full scale output current settling time of 150 ns, power consumption of only 33 mW, and a power supply voltage range of -4.5V to -18V.
national semiconductor DAC0800/DAC0802 8-Bit Digital-to-Analog Converters Manual
The DAC0800/DAC0802 8-bit digital-to-analog converters are high-performance, high-precision DACs produced by Texas Instruments, with a typical settling time of 100 ns and a maximum output current of ±18V, which can be used for measurement, control and other applications
National Semiconductor DAC0630/DAC0631 handbook
National Semiconductor LM2747
The LM2747 is a high-precision synchronous buck controller that provides simple step-down conversion with output voltages as low as 0.6V. The device features an adjustable fixed-frequency voltage-mode PWM control architecture, with frequency adjustable from 50kHz to 1MHz with one external resistor. In addition, the LM2747 also allows the switching frequency to be synchronized to an external clock signal in the range of 250kHz to 1MHz. This wide range of switching frequency provides the power supply designer the flexibility to make better tradeoffs between component size, cost, and efficiency. Features include the ability to startup with a pre-biased load on the output, soft-start, input undervoltage lockout (UVLO) and Power Good (based on both undervoltage and overvoltage detection). In addition, the shutdown pin of the IC can be used for providing power-down.
NATIONAL LM3502 DATA SHEET
NATIONAL LM124/224/324/2902 DATA SHEET
LM124/LM224/LM324/LM2902 is a low power quad operational amplifier, used for single power supply, with high gain, internal frequency compensation and temperature compensation.
National Semiconductor DP83816 10/100 Mb/s Integrated PCI Ethernet Media Access Controller Physical Layer (MacPHYTER-II ) handbook
DP83816 is a 10/100 Mb/s integrated PCI Ethernet Media Access Controller and Physical Layer (MacPHYTER-II™) produced by National Semiconductor Corporation, targeting low-cost, high volume PC motherboards, adapter cards, and embedded systems.
National semiconductor DP8390D/NS32490D NIC Network Interface Controller handbook
The DP8390D�NS32490D Network Interface Controller (NIC) is a microCMOS VLSI device designed to ease interfacing with CSMA�CD type local area networks including Ethernet� Thin Ethernet (Cheapernet) and StarLAN�. The NIC implements all Media Access Control (MAC) layer functions for transmission and reception of packets in accordance with the IEEE 802�3 Standard. Unique dual DMA channels and an internal FIFO provide a simple yet efficient packet management design. To minimize system parts count and cost, all bus arbitration and memory support logic are integrated into the NIC. The document also describes the features and characteristics of the product.
National semiconductor DP83905 AT/LANTIC AT Local Area Network Twisted-Pair Interface Controller handbook
DP83905 AT·LANTIC AT Local Area Network Twisted-Pair Interface Controller is a CMOS VLSI device designed for easy implementation of CSMA/CD local area networks. Unique to the AT·LANTIC is the integration of the entire bus interface for PC-AT, ISA (Industry Standard Architecture) bus based systems. Hardware and software selectable options allow the AT·LANTIC's bus interface to be configured software compatible to either an NE2000 or Ethercard PLUS16TM. All bus drivers and control logic are integrated to reduce board cost and area. Supported network interfaces include 10BASE5 or 10BASE2 Ethernet via an external transceiver connected to its AUI port, and Twisted-pair Ethernet (10BASE-T) using the on-board transceiver. The AT·LANTIC provides the Ethernet Media Access Control (MAC), Encode-Decode (ENDEC) with an AUI interface, and 10BASE-T transceiver functions in accordance with the IEEE 802.3 standards. The AT·LANTIC's integrated 10BASE-T transceiver fully complies with the IEEE standard. This functional block incorporates the receiver, transmitter, collision, heartbeat, Ioop-back, jabber, and link integrity blocks as defined in the standard. The transceiver when combined with equalization resistors, transmit/receive filters, and pulse transformers provides a complete 10BASE-T Ethernet function.
National semiconductor DP83907 AT/LANTIC II handbook
DP83907 AT�LANTIC II is a Ethernet controller produced by Texas Instruments, it supports 10BASE-T, 10BASE2 and 10BASE5 Ethernet protocols, and integrates Ethernet media access control (MAC) and encode-decode (ENDEC) functions.
National Semiconductor DP83936AVUL-20/25/33 MHz Full Duplex SONIC TM -T Systems-Oriented Network Interface Controller with Twisted Pair Interface handbook
DP83936AVUL-20�25�33 MHz Full Duplex SONICTM-T Systems-Oriented Network Interface Controller with Twisted Pair Interface
National Semiconductor DP83934CVUL-20/25 MHz SONIC TM -T Systems-Oriented Network Interface Controller with Twisted Pair Interface handbook
SONIC-T is a second-generation Ethernet Controller designed to meet the demands of today's high-speed 32- and 16-bit systems.
national semiconductor DP83902A ST-NIC Serial Network Interface Controller for Twisted Pair Manual
The DP83902A ST-NIC is a serial network interface controller designed for twisted pair local area networks using CSMA/CD. It supports Ethernet, Thin Ethernet, and Twisted-pair Ethernet, and complies with IEEE 802.3 standards. The controller features a fully compliant 10BASE-T transceiver that supports receiver, transmitter, collision detection, heartbeat, loopback, jabber, and link integrity functions as defined in the standard. It also includes Manchester encoding and decoding, diagnostic loopback capability, and provides an IEEE compliant AUI interface.
national semiconductor DP83901A SNIC Serial Network Interface Controller Manual
The DP83901A SNIC Serial Network Interface Controller is a network controller produced by National Semiconductor. The controller supports the IEEE 802.3 standard and can realize a 10Mbit/s network connection.
national semiconductor DP83820 10/100/1000 Mb/s PCI Ethernet Network Interface Controller Manual
DP83820 10/100/1000 Mb/s PCI Ethernet Network Interface Controller is a single-chip 10/100/1000 Mb/s Ethernet controller for the PCI bus from National Semiconductor Corporation. It is targeted at high-performance adapter cards and mother boards. The DP83820 fully implements the V2.2 66 MHz, 64-bit PCI bus interface for host communications with power management support. Packet descriptors and data are transferred via bus-mastering, reducing the burden on the host CPU. The DP83820 can support full duplex 10/100/1000 Mb/s transmission and reception.