Maxim manuals, page 64
MAXIM MAX9856 Manual
The MAX9856 is a high-performance, low-power stereo audio CODEC designed for MP3, personal media players (PMPs), or other portable multimedia devices. Using on-board stereo DirectDrive® headphone amplifiers, the CODEC can output 30mW into stereo 32Ω headphones while operating from a single 1.8V power supply. Very low 9mW playback power consumption makes it an ideal choice for battery-powered applications. The MAX9856 provides microphone input amplifiers, plus flexible input selection, signal mixing, and automatic gain control (AGC). Comprehensive load-impedance sensing allows the MAX9856 to autodetect most common audio and audio/video headset and jack plug types. Outputs include stereo DirectDrive line outputs and DirectDrive headphone amplifiers. The stereo ADC can convert audio signals from either internal or external microphones that can be configured for single-ended or differential signal inputs. Line inputs can be configured as stereo, differential, or mono and fed through one channel of the microphone path. The analog inputs selected can be gain ranged or mixed with other input sources prior to conversion to digital. The ADC path also features programmable digital highpass filters to remove DC offset voltages and wind noise. The MAX9856 supports all common sample rates from 8kHz to 48kHz in both master and slave mode. The serial digital audio interfaces support a variety of formats including I2S, left-justified, and PCM modes. The MAX9856 is a leading low-power, high-performance stereo audio CODEC that is ideal for MP3 players, portable audio products, and other portable devices.
MAXIM MAX9860 16-Bit Mono Audio Voice Codec handbook
The MAX9860 is a low-power, voiceband, mono audio codec designed to provide a complete audio solution for wireless voice headsets and other mono voice audio devices.
MAXIM MAX9867 Ultra-Low Power Stereo Audio Codec handbook
The MAX9867 is an ultra-low power stereo audio codec designed for portable consumer devices such as mobile phones and portable gaming consoles. The device features stereo differential microphone inputs that can be connected to either analog or digital microphones. The single-ended line inputs, with configurable preamplifier, can be sent to the ADC for record or routed directly to the headphone amplifier for playback. An auxiliary ADC path can be used to track any DC voltage. The stereo headphone amplifiers support differential, single-ended, and capacitorless output configurations. Using the capacitorless output configuration, the device can output 10mW into 32Ω headphones. Comprehensive click-and-pop circuitry suppresses audible clicks and pops during volume changes and startup or shutdown. Utilizing Maxim’s proprietary digital circuitry, the device can accept any available 10MHz to 60MHz system clock. This architecture eliminates the need for an external PLL and multiple crystal oscillators. The stereo ADC and DAC paths provide user-configurable voice-band or audioband digital filters. Voiceband filters provide extra attenuation at the GSM packet frequency and greater than 70dB stopband attenuation at fS/2. The MAX9867 operates from a single 1.8V supply, and supports a 1.65V to 3.6V logic level. An I2C 2-wire seri- al interface provides control for volume levels, signal mixing, and general operating modes. The MAX9867 is available in a tiny 2.2mm 24-lead QFN package, suitable for applications with the most minimal space constraints.
MAXIM MAX9880A Low-Power High-Performance Dual I2 S Stereo Audio Codec handbook
The MAX9880A is a high-performance stereo audio codec designed for portable consumer applications such as smartphones and tablets. It operates from a single 1.8V supply to ensure low power consumption and offers a variety of input and output configurations for design flexibility.
MAXIM MAX9888 Stereo Audio CODEC with FlexSound Technology handbook
MAX9888 is a high performance, low power consumption audio CODEC produced by Maxim. The device supports two-way stereo audio output and two-way speaker drive. It also integrates low-pass filter, headphone amplifier, digital microphone interface, FM radio interface and other functions. It is suitable for portable audio devices.
MAXIM MAX98088 Stereo Audio Codec with FlexSound Technology handbook
The MAX98088 is a full-featured audio codec whose high performance and low power consumption make it ideal for portable applications.
MAXIM MAX98089 Low-Power Stereo Audio Codec with FlexSound Technology handbook
The MAX98089 is a low-power, stereo audio codec with FlexSound technology. It is ideal for portable applications due to its high performance and low power consumption. It features Class D speaker amplifiers that provide efficient amplification for two speakers. The codec enables completely filterless operation with low radiated emissions. Integrated bypass switches allow for connection to an external amplifier when the Class D amplifiers are disabled. The IC also includes a stereo Class H headphone amplifier that maximizes efficiency and outputs a ground referenced signal without the need for output coupling capacitors. It also features a mono differential amplifier that can be configured as a stereo line output. The codec supports two differential analog microphone inputs and two PDM digital microphones. Integrated switches allow for an additional microphone input and routing of microphone signals to external devices. It can also be connected to FM radios or other sources with two flexible single-ended or differential line inputs.
MAXIM MAX9850 Stereo Audio DAC with DirectDrive Headphone Amplifie handbook
MAX9850 is a low-power, high-performance stereo audio DAC with an integrated DirectDrive headphone amplifier. The MAX9850 is designed to meet the board space and performance requirements of portable devices such as cell phones and MP3 and portable DVD players. The MAX9850 uses Maxim's DirectDrive headphone technology that produces a ground-biased analog audio output from a single supply, which allows for driving the headphones directly from the amplifier outputs without large DC-blocking capacitors. This feature saves board space, provides higher click/pop suppression, and improves low-frequency (bass) response. The architecture does not require the headphone jack to be biased to a DC voltage and thus allows for a conventional, grounded chassis design. The MAX9850's flexible clocking circuitry utilizes any available system clock up to 40MHz, eliminating the need for an external PLL and multiple crystal oscillators. The DAC supports a wide range of sample rates from 8kHz to 48kHz in both master and slave modes, making the MAX9850 the easiest to use and most versatile audio DAC available. It can also be operated like traditional synchronous DACs, at any integer-oversampling ratio. The audio DAC receives input data over a flexible 3-wire interface that supports left-justified, right-justified audio data, or I2S-compatible audio data. Stereo audio line inputs are provided to either mix analog audio with the digital input stream, or to drive the headphones.
MAXIM MAX5556 Low-Cost Stereo Audio DAC handbook
The MAX5556 is a low-cost stereo audio sigma-delta digital-to-analog converter (DAC) that provides a simple and complete stereo digital-to-analog solution for media servers, set-top boxes, video-game hardware, automotive rear-seat entertainment, and other general consumer audio applications. It features built-in digital interpolation/filtering, sigma-delta digital-to-analog conversion, and analog output filtering. The MAX5556 receives input data over a 3-wire I2S-compatible interface with left-justified audio data. Sampling rates from 2kHz to 50kHz are supported. The device operates from a single +4.75V to +5.5V analog supply with total harmonic distortion plus noise below -87dB.
MAXIM MAX9789/MAX9790 Windows Vista-Compliant Stereo Class AB Speaker Amplifiers DirectDrive Headphone Amplifiers handbook
The MAX9789/MAX9790 combine a stereo, 2W Class AB speaker power amplifier with a stereo 100mW DirectDrive® headphone amplifier in a single device.
MAXIM MAX9775/MAX9776 2 x 1.5W Stereo Class D Audio Subsystem with DirectDrive Headphone Amplifier handbook
This product is a high-efficiency Class D stereo/mono audio power amplifier with a mono DirectDrive® receiver amplifier and a stereo DirectDrive headphone amplifier.
MAXIM MAX9796 2.3W High-Power Class D Audio Subsystem with DirectDrive Headphone Amplifiers handbook
The MAX9796 combines a high-efficiency Class D, mono audio power amplifier with a mono DirectDrive™ receiver amplifier and a stereo DirectDrive headphone amplifier. Maxim’s 3rd-generation, ultra-low EMI, Class D audio power amplifiers provide Class AB performance with Class D efficiency. The MAX9796 delivers 2.3W into a 4Ω load from a 5V supply and offers efficiencies up to 80%. Active emissions limiting circuitry and spread-spectrum modulation greatly reduce EMI, eliminating the need for output filtering found in traditional Class D devices. The MAX9796 features a fully differential architecture, a full-bridged output, and comprehensive click-and-pop suppression. The device utilizes a flexible, user-defined mixer architecture that includes an input mixer, volume control, and output mixer. All controls are done through an I2C interface. The mono receiver amplifier and stereo headphone amplifier use Maxim’s DirectDrive architecture, that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space, and component height.
MAXIM MAX9877 Low RF Susceptibility Mono Audio Subsystem with DirectDrive Headphone Amplifier handbook
MAXIM MAX9791/MAX9792 Windows Vista-Compliant Class D Speaker Amplifiers with DirectDrive Headphone Amplifiers handbook
The MAX9791 combines a stereo 2W Class D power amplifier, a stereo 180mW DirectDrive® headphone amplifier, and a 120mA low-dropout (LDO) linear regulator in a single device. The MAX9792 combines a mono 3W Class D power amplifier, a stereo 180mW DirectDrive headphone amplifier, and a 120mA LDO linear regulator in a single device. The MAX9791/MAX9792 feature Maxim’s DirectDrive headphone amplifier architecture that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, board space, and component height. High 107dB DC PSRR and low 0.006% THD+N ensure clean, low-distortion amplification of the audio signal. The ground sense feature senses and corrects for the voltage difference between the output jack ground and device signal ground. This feature minimizes headphone amplifier crosstalk by sensing the impedance in the ground return trace and correcting for it at the output jack. This feature also minimizes ground-loop noise when the output socket is used as a line out connection to other grounded equipment (for example, a PC connected to a home hi-fi system). The MAX9791/MAX9792 feature low RF susceptibility, allowing the amplifiers to successfully operate in close proximity to wireless applications. The MAX9791/MAX9792 Class D amplifiers feature Maxim’s spread-spectrum modulation and active emissions limiting circuitry. Industry-leading click-and-pop suppression eliminates audio noise and pops.
MAXIM MAX9879 Stereo Class D Audio Subsystem with DirectDrive Headphone Amplifier handbook
The MAX9879 combines a high-efficiency stereo Class D audio power amplifier with a stereo capacitor-less DirectDrive® headphone amplifier. It provides Class AB performance with Class D efficiency, delivering up to 715mW of power into an 8Ω load with 88% efficiency from a 3.7V supply, extending battery life. The filterless modulation scheme, active emission limiting circuitry, and spread-spectrum modulation reduce EMI and eliminate the need for output filtering. The headphone amplifier delivers up to 58mW into a 16Ω load from a 3.7V supply. The device features a ground-referenced output, eliminating the need for large DC-blocking capacitors. It also includes a user-defined input architecture, preamplifier gain settings, input mixer, volume control, click-and-pop suppression, and I2C control. The bypass mode allows an external amplifier to drive the speaker connected to the MAX9879 outputs. The MAX9879 is available in a thermally efficient, space-saving 30-bump UCSP™ package.