Key facts
- Manuals
- 97
- Categories
- 2
- Languages
- ZH · EN · JA
- Last added
- 2012-05-08
Featured AELTA manuals
Delta Electronics DVPCOPM-SL Installation Manual
The DVPCOPM‑SL is a CANopen communication module that connects to a PLC MPU. It operates on a 24 VDC bus and supports up to eight modules in a network. The manual provides wiring diagrams, power specifications, and configuration steps.
Key sections cover LED status indicators, error troubleshooting, address setting via DIP switches, and communication speed settings ranging from 10 kbps to 1 Mbps. Environmental and electrical isolation requirements are also listed. This manual is written in Chinese.
Covers: Specifications · LED Indicator & Troubleshooting · Installation · Electrical Specifications · Environmental Specifications · Address Setting Switch
Delta DVP02LC-SL Load Cell Module Installation Manual
The DVP02LC-SL is a 24‑bit load cell module for Delta's DVP series PLC, supporting 4‑wire or 6‑wire strain‑gauge load cells. It offers adjustable response times and a range of measurement settings for precise weight measurement.
The guide covers safety precautions, mechanical mounting, external wiring, electrical specifications, control register settings, error codes, and communication configuration (RS‑232/RS‑485). It also provides detailed tables for register functions and wiring diagrams to assist installers and service technicians.
Covers: Product Profile & Dimensions · I/O Terminal Layout · External Wiring · Electrical Specifications · Control Register · Error Code Table
Delta DVP-10PM Installation Guide
This guide provides the electrical specifications, wiring diagrams, and installation instructions for the Delta DVP-10PM programmable controller. It covers power supply requirements, input and output point configurations, and safety precautions for proper mounting.
The document also explains battery‑low indication, permanent data storage options, and recommended grounding practices to ensure reliable operation in industrial environments.
Covers: Product Profile & Dimensions · Electrical Specifications · Input Points · Output Points · Installation & Mounting · Wiring Guidelines
Delta DVP-20PM Installation Manual
This manual provides step‑by‑step instructions for installing the Delta DVP‑20PM PLC. It includes mechanical mounting details, DIN‑rail and direct‑mount options, and wiring guidelines for both power and I/O connections.
Safety information covers grounding, protection circuits, and battery‑low indication, while the electrical specifications section lists power supply ranges, fuse ratings, and current limits required for reliable operation.
Covers: Product Profile & Dimension · Electrical Specifications · Installation · Wiring · Power Supply · Battery Low Indicator
Latest AELTA manuals
AELTA ASDA-B Installation Guide(1)
This document provides instructions for the installation, wiring, inspection, and operation of Delta ASDA-B series AC servo drive and ECMA series servo motor. It is important to read and understand this document before using the product to ensure correct use. If you have any questions, please contact your local Delta sales representative. Keep this document in a safe place for future reference.
AELTA IFD9506 Ethernet communication transform module RS485 -- Ethernet Manual
IFD9506 Ethernet communication conversion module RS485 <--> Ethernet operation manual, mainly introduces the function introduction, appearance size, each part introduction, indicator light instructions, RJ-11 pin definition, RJ-45 pin definition, RS-232 pin definition, station number setting, data format setting, Modbus communication speed setting, European terminal block pin definition, installation and wiring, IFD9506 register, monitoring function, slave mode device station number and relay address setting function, MODBUS communication standard, software setting, web setting, application examples (DCISOFT), application examples (WPLSOFT) and other content.
AELTA IFD9507 EtherNet/IP communication transform module RS485 -- EtherNet/IP Manual
The IFD9507 EtherNet/IP Communication Conversion Module RS485 <--> EtherNet/IP Operation Manual mainly introduces the module's functional specifications, installation, basic operations and settings, as well as the introduction of network protocols.
Delta Electronics DVPCOPM-SL Installation Manual
Installation Guide 4 pages · 1.1 MB · ZHInstallation guide for the Delta Electronics DVPCOPM‑SL CANopen module with wiring, LED troubleshooting and address setup.
Delta DVP02LC-SL Load Cell Module Installation Manual
Installation Guide 19 pages · 655 KB · ENThis installation manual provides wiring, mounting, electrical specifications, and setup instructions for Delta DVP02LC-SL load cell module.
Delta DVP-10PM Installation Guide
Installation Guide 16 pages · 835 KB · ENInstallation guide for the Delta DVP-10PM programmable controller with wiring, mounting and electrical specifications.
Delta DVP-20PM Installation Manual
Installation Guide 20 pages · 1000 KB · ENInstallation guide for the Delta DVP-20PM programmable logic controller, covering mounting, wiring, power and safety.
Delta DVP‑SX2 Installation Guide
Installation Guide 20 pages · 968 KB · ENThis installation guide provides electrical specs, wiring instructions, and mounting details for the Delta DVP‑SX2 20‑point PLC.
Delta DVP-ES2 PLC Installation Guide
Installation Guide 22 pages · 1 MB · ENInstallation guide for Delta DVP-ES2 series PLC, covering electrical specs, wiring, mounting, and safety instructions.
Delta VFD-VE Series AC Motor Drive User Manual
User Manual 290 pages · 5.7 MB · ZHThe Delta VFD-VE series AC motor drive user manual provides installation, wiring, parameter setup, troubleshooting, and maintenance instructions.
Delta VFD002DD2 1A Service Manual
Service Manual 120 pages · 2.2 MB · JAService manual for the Delta VFD002DD2 1A variable frequency drive, covering installation, parameters, safety and maintenance.
AELTA DVP-20PM Installation Manual
Installation Guide 19 pages · 1000 KB · ENThe AELTA DVP-20PM Installation Manual provides electrical specs, wiring instructions, and safety guidelines for installing the PLC.
AELTA DVP08TC-H2 installation manual
Installation Guide 20 pages · 649 KB · ENInstallation guide for the AELTA DVPO8TC-H2 temperature measurement module, covering wiring, power, and register settings.
DVP-EH3 Installation Manual
Installation Guide 18 pages · 1009 KB · ENInstallation and wiring guide for the DVP‑EH3 PLC, covering electrical specs, mounting, and safety instructions.
AELTA DVP-EH3-L PLC Installation Manual
Installation Guide 2 pages · 2.2 MB · ENInstallation manual for the AELTA DVP-EH3-L PLC, covering wiring, mounting, safety, and electrical specifications.
Which document do I need?
Installation Guide
Mounting, wiring and first power-up. Read it before the hardware goes in.
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Service Manual
Disassembly, diagnostics and part numbers, for repair.
Questions answered in AELTA manuals
What is the recommended tightening torque for the I/O terminal block?
The tightening torque is 1.95 kg‑cm (1.7 in‑lbs).
Which response times can be selected for the module?
Response times of 2, 10, 20, 40, or 80 ms per channel can be set.
What is the recommended size for the grounding wire?
The grounding wire shall not be smaller than the L and N power terminals.
What should be done when the BAT.LOW indicator lights?
Replace the battery promptly to avoid loss of data stored in the latched area.
What power supply voltage should be used for the DVP‑20PM?
The PLC requires an AC input of 100 to 240 VAC with a tolerance of –15 % to +10 %.
What should be done when the BAT.LOW indicator turns on?
Replace the battery immediately to avoid loss of data stored in the latched SRAM area.