Texas Instruments manuals, page 29
TEXAS INSTRUMENTS NE5532/NE5532A/SA5532/SA5532A handbook
The NE5532, NE5532A, SA5532, and SA5532A are high-performance operational amplifiers combining excellent dc and ac characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage.
TEXAS INSTRUMENTS LP239 LP339 LP2901 handbook
The LP239, LP339, LP2901 are low-power quadruple differential comparators. Each device consists of four independent voltage comparators designed specifically to operate from a single power supply and typically to draw 60-µA drain current over a wide range of voltages.
TEXAS INSTRUMENTS LM4040 PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE handbook
The LM4040 series is a versatile and easy-to-use shunt voltage reference that caters to a vast array of applications. This product requires no external capacitors for operation and is stable with all capacitive loads. Additionally, the reference offers low dynamic impedance, low noise, and low output fluctuations.
TEXAS INSTRUMENTS LM4040 PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE handbook(1)
The LM4040 series is a versatile and easy-to-use voltage reference that caters to a vast array of applications. It features fixed output voltages, requires no external resistors or capacitors for operation, and is stable with all capacitive loads. Additionally, the reference offers low dynamic impedance, low noise, and a wide operating current range.
TEXAS INSTRUMENTS LP358 LP2904 ULTRA-LOW-POWER DUAL OPERATIONAL AMPLIFIERS handbook
The LP358 and LP2904 are dual low-power operational amplifiers especially suited for battery-operated applications. Despite ultra-low power consumption, they still achieve good input specifications and wide supply voltage range. They are ideal for portable instrumentation, LCD displays, consumer electronics, and power supplies.
TEXAS INSTRUMENTS LP239/339/2901 handbook
The LP239 is an obsolete product and is no longer supplied. It is a low-power quadruple differential comparator with a wide supply voltage range and ultralow power supply current drain. It is suitable for various applications, including limit comparators, simple analog-to-digital converters, pulse generators, etc.
TEXAS INSTRUMENTS LM124 LM124A LM224 LM224A LM324 LM324A LM324Y LM2902 LM2902Q QUADRUPLE OPERATIONAL AMPLIFIERS handbook
This data sheet introduces the characteristics of LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV, etc. These devices have 2-kV ESD protection, wide supply range, low supply current drain, common-mode input voltage range including ground, allowing direct sensing near ground, low input bias and offset parameters, differential input voltage range and other features.
TEXAS INSTRUMENTS LM124 LM124A LM224 LM224A LM324 LM324A LM2902/LM2902V/LM224K/LM224KA/LM324K/LM324KA/LM2902K/LM2902KV/LM2902KAV handbook
This document introduces the features and characteristics of LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV products, including 2-kV ESD protection, wide supply ranges, low supply current consumption, common-mode input voltage range includes ground, allowing direct sensing near ground, low input bias and offset parameters, differential input voltage range, etc.
TEXAS INSTRUMENTS LM118 LM218 LM318 FAST GENERAL-PURPOSE OPERATIONAL AMPLIFIERS handbook
The LM118, LM218, and LM318 are precision, fast operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They feature a factor-of-ten increase in speed over general-purpose devices without sacrificing dc performance. These operational amplifiers have internal unity-gain frequency compensation. This considerably simplifies their application, since no external components are necessary for operation. However, unlike most internally compensated amplifiers, external frequency compensation may be added for optimum performance. For inverting applications, feed-forward compensation boosts the slew rate to over 150 V/µs and almost double the bandwidth. Overcompensation can be used with the amplifier for greater stability when maximum bandwidth is not needed. Further, a single capacitor may be added to reduce the settling time for 0.1% error band to under 1 µs. The high speed and fast settling time of these operational amplifiers make them useful in A/D converters, oscillators, active filters.
TEXAS INSTRUMENTS LM211-EP Manual
TEXAS INSTRUMENTS SN74CB3T16210 20-BIT FET BUS SWITCH 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V-TOLERANT LEVEL SHIFTERhandbook
SN74CB3T16210 is a 20-bit FET bus switch from TI that supports 5V and 3.3V voltages and has a 5V-tolerant level shifter.
TEXAS INSTRUMENTS SN74CB3T16212 24-BIT FET BUS-EXCHANGE SWITCH 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V-TOLERANT LEVEL SHIFTER handbook
SN74CB3T16212 is a 24-bit FET bus exchange switch, a 2.5-V/3.3-V low-voltage bus switch with 5-V tolerant level shifter.
TEXAS INSTRUMENTS SN74CB3Q3305 DUAL FET BUS SWITCH 2.5-V/3.3-V LOW-VOLTAGE HIGH-BANDWIDTH BUS SWITCH handbook
The SN74CB3Q3305 is a dual FET bus switch with 2.5V/3.3V low voltage and high bandwidth characteristics. It features a high bandwidth data path, low power consumption, 5V tolerant I/Os, and low and flat ON-state resistance.
TEXAS INSTRUMENTS ADC0808M handbook
The ADC0808M is a monolithic CMOS device with an 8-channel multiplexer, an 8-bit analog-to-digital (A/D) converter, and microprocessor-compatible control logic.
TEXAS INSTRUMENTS ADC0803 ADC0805 8-BIT ANALOG-TO-DIGITAL CONVERTERS WITH DIFFERENTIAL INPUTS handbook
The ADC0803 and ADC0805 are CMOS 8-bit successive-approximation analog-to-digital converters that use a modified potentiometric (256R) ladder. They feature 8-bit resolution, ratiometric conversion, 100-µs conversion time, 135-ns access time, guaranteed monotonicity, high reference ladder impedance, no zero adjust requirement, on-chip clock generator, single 5-V power supply, and can operate with a microprocessor or as a stand-alone device.