TEXAS Manuals

The TLV7211 and TLV7211A are micropower CMOS comparators available in the space-saving SOT-23-5 package. This makes the comparators ideal for space- and weight-critical designs. The TLV7211A features an input offset voltage of 5 mV, and the TLV7211 features an input offset voltage of 15 mV. The main benefits of the SOT-23-5 package are most apparent in small portable electronic devices, such as mobile phones, pagers, notebook computers, personal digital assistants, and PCMCIA cards. The rail-to-rail input voltage makes the TLV7211 or TLV7211A a good choice for sensor interfacing, such as light detector circuits, optical and magnetic sensors, and alarm and status circuits.

The TLC220x, TLC220xA, TLC220xB, and TLC220xY are precision, low-noise operational amplifiers using Texas Instruments Advanced LinCMOS process. These devices combine the noise performance of the lowest-noise JFET amplifiers with the dc precision available previously only in bipolar amplifiers. The Advanced LinCMOS process uses silicon-gate technology to obtain input offset voltage stability with temperature and time that far exceeds that obtainable using metal-gate technology. In addition, this technology makes possible input impedance levels that meet or exceed levels offered by top-gate JFET and expensive dielectric-isolated devices. The combination of excellent dc and noise performance with a common-mode input voltage range that includes the negative rail makes these devices an ideal choice for high-impedance, low-level signal-conditioning applications in either single-supply or split-supply.

This datasheet introduces the features and characteristics of the DAC7552, including a single supply of 2.7-V to 5.5-V, 12-bit linearity and monotonicity, rail-to-rail voltage output, 5 µs (maximum) settling time, 0.1nVs of ultralow glitch energy, -100 dB of ultralow crosstalk, 440 µA (maximum) of low power, 2 µA (maximum) of per-channel power down, power-on reset to zero scale, SPI-compatible serial interface (up to 50 MHz), daisy-chain capability, and asynchronous hardware clear.

8-bit D flip-flop

The ’HC283 and ’HCT283 binary full adders add two 4-bit binary numbers and generate a carry-out bit if the sum exceeds 15. This device can be used with either all active-high operands (positive logic) or with all active-low operands (negative logic).

The bq2941x is a secondary overvoltage protection IC for 2-, 3-, or 4-cell lithium-ion battery packs that incorporates a high-accuracy precision overvoltage detection circuit. It includes a programmable delay circuit for overvoltage detection time.

Query suppliers for TPC1010AFN-044C. This document provides information about the TPC1010AFN-044C product.

This document describes the features and characteristics of models such as SN54LVTH18512, SN54LVTH182512, SN74LVTH18512, and SN74LVTH182512. These products are 3.3V ABT SCAN test devices with 18-bit universal bus transceivers. They support mixed-mode signal operation, compatible with 5V input and output voltages with 3.3V VCC. They can operate with unregulated battery down to 2.7V. The UBT (Universal Bus Transceiver) combines D-type latches and D-type flip-flops for operation in transparent, latched, or clocked mode. Bus hold on data inputs eliminates the need for external pullup/pulldown resistors. The B-port outputs of 'LVTH182512 devices have equivalent 25-Ω series resistors, so no external resistors are required. They are compatible with the IEEE Std 1149.1-1990 (JTAG) test access port and boundary-scan architecture. The SCOPE instruction set includes the required instructions and optional CLAMP and HIGHZ, supporting parallel-signature analysis at inputs, pseudo-random pattern generation from outputs, sample inputs/toggle outputs, binary count from outputs, device identification, and even-parity opcodes. Package options include 64-pin plastic thin shrink small outline (DGG) and 64-pin ceramic dual flat (HKC) packages using 0.5-mm center-to-center spacings.

This document is the datasheet of SN54ALS04B, SN54AS04, SN74ALS04B, SN74AS04 HEX INVERTERS, which contains 6 independent HEX INVERTERS and can work in the temperature range of -55°C to 125°C

SLAS344A is a low-power microcontroller with a low supply voltage range of 1.8V to 3.6V. It features five power saving modes and fast wake-up from standby mode. It adopts a 16-bit RISC architecture and includes a 12-bit A/D converter, 16-bit timers, a comparator, and a serial communication interface. It also has an integrated LCD driver and is suitable for various applications.

The MC1458 and MC1558 are dual general-purpose operational amplifiers, with each half electrically similar to the µA741, except that offset null capability is not provided. The high-common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability without external components. The MC1458 is characterized for operation from 0°C to 70°C. The MC1558 is characterized for operation over the full military temperature range of –55°C to 125°C.

TMS320C6211 and TMS320C6211B are excellent price/performance digital signal processors (DSPs) with eight 32-bit instructions per cycle, clock rates of 150MHz and 167MHz, instruction cycle times of 6.7ns and 6ns, and performance of 1200 and 1333 MIPS.

The TLV247x series are low power, high performance, CMOS operational amplifiers that offer 2.8 MHz of gain-bandwidth product, input bias current of only 2.5 pA, and output drive capability up to ±35 mA.

TLE202x, TLE202xA, TLE202xB, TLE202xY are the new generation of precision, high-speed, low-power operational amplifiers using the Texas Instruments Excalibur process.