Fairchild Manuals - Page 15

ManualLib has 3,322 Fairchild manuals, in categories such as Automation control Equipment, Electronic Original. Every file can be read online or downloaded as a PDF for free.

Fairchild manuals, page 15

  • FAIRCHILD USB1T1105A Universal Serial Bus Peripheral Transceiver with Voltage Regulator handbook

    The USB1T1105A is a USB peripheral transceiver that complies with USB Specification Rev 2.0. It has an integrated 5V to 3.3V voltage regulator that can be powered directly from the USB host (VBUS). It supports full speed 12Mbit/s data rates and is ideal for portable electronic devices.

  • FAIRCHILD USB1T1104 Universal Serial Bus Peripheral Transceiver with Voltage Regulator handbook

    USB1T1104 is a USB1.1 compliant transceiver that supports 12Mbit/s data rate. It uses an integrated 5.0V to 3.3V voltage regulator that can be used in low voltage devices. It also has 15kV ESD protection that can protect larger ASICs and USB controllers.

  • FAIRCHILD USB1T1103 Universal Serial Bus Peripheral Transceiver with Voltage Regulator handbook

    The USB1T1103 is a universal serial bus peripheral transceiver with a voltage regulator that complies with USB Specification Rev 2.0. It allows USB application specific devices to interface with the physical layer of the universal serial bus, supporting supply voltages ranging from 1.65V to 3.6V. The chip operates at 12Mbits/s (full speed) data rates and provides exceptional ESD protection with 15kV contact HBM on bus terminals.

  • FAIRCHILD USB1T1102 USB1T1102R (Preliminary) Universal Serial Bus Peripheral Transceiver with Voltage Regulator handbook

    USB1T1102 is a USB Transceiver produced by Fairchild Semiconductor Corporation. It has an integrated 5V to 3.3V voltage regulator and supports 12Mbits/s full speed data transmission.

  • FAIRCHILD USB1101 handbook

    USB1101 is a USB 2.0 FS peripheral transceiver that complies with USB 2.0 specification. It supports supply voltage ranging from 1.65V to 3.6V and operates at 12Mbits/s data rates. It is ideal for portable electronic devices.

  • FAIRCHILD USB10P handbook

    USB10P is a P-Channel 2.5V specified MOSFET from Fairchild Semiconductor, which has extremely low RDS(ON), low gate charge and high performance trench technology, suitable for battery power applications such as load switching and power management, battery charging circuits and DC/DC conversion.

  • FAIRCHILD USB10H handbook

    This document provides details of the USB10H MOSFET. It is a dual-channel P-Channel MOSFET with a operating voltage of 2.5V. The product is produced using Fairchild Semiconductor's PowerTrench process, which minimizes on-state resistance and gate charge for superior switching performance. It offers exceptional power dissipation in a small footprint and is suitable for applications where larger packages are impractical. Features include a maximum drain current of -1.9A, maximum drain-source voltage of -20V, low gate charge, and fast switching speed.

  • FAIRCHILD USB100 handbook

    USB100 is a low-cost, fully customizable controller for USB HID-class pointing devices produced by FAIRCHILD. It is in full compliance with REV 1.0 of the USB standard and implements the HID class specification for mice, trackballs, joysticks and gamepads.

  • FAIRCHILD FAN7380 handbook

    The FAN7380 is a monolithic half-bridge gate drive IC for MOSFETs and IGBTs, which operate up to +600V. Fairchild's high-voltage process and common-mode noise canceling technique give stable operation of high-side driver under high-dv/dt noise circumstances. An advanced level-shift circuit allows high-side gate driver operation up to VS=-9.8V (typical) for VBS=15V. The input logic level is compatible with standard TTL-series logic gates. The internal shoot-through protection circuit provides 100ns dead-time to prevent output switching devices from both conduction during transition periods. UVLO circuits for both channels prevent malfunction when VCC and VBS are lower than the specified threshold voltage.

  • FAIRCHILD FAN7382 handbook

    The FAN7382 is a monolithic high and low side gate-drive IC, which can drive MOSFETs and IGBTs that operate up to +600V. It can be applied to PDP scan driver, fluorescent lamp ballast, SMPS, motor driver, etc.

  • FAIRCHILD FAN7383 handbook

    The FAN7383 is a high voltage half-bridge gate-drive IC with shutdown and programmable dead-time control functions for driving MOSFETs and IGBTs that operate up to +600V.

  • FAIRCHILD FAN73832 Half-Bridge Gate-Drive IC handbook

    The FAN73832 is a half-bridge, gate-drive IC with shut-down and programmable dead-time control functions for driving MOSFETs and IGBTs, operating up to +600V. Fairchild’s high-voltage process and common-mode noise canceling technique provide stable operation of high-side driver under high dv/dt noise circumstances. An advanced level-shift circuit allows high-side gate driver operation up to VS=-9.8V (typical) for VBS=15V. The UVLO circuits for both channels prevent malfunction when VDD and VBS are lower than the specified thresh- old voltage. Output drivers typically source/sink 350mA/650mA, respectively, which is suitable for all kinds of half- and full-bridge inverters.

  • FAIRCHILD FAN73833- Half-Bridge Gate-Drive IC handbook

    The FAN73833 is a half-bridge gate-drive IC for driving MOSFETs and IGBTs, operating up to +600V. It features a floating channel for Bootstrap operation, with sourcing/sinking current driving capability of 350mA/650mA for each channel. It has an extended allowable negative VS swing to -9.8V for signal propagation at VDD=VBS=15V. It is compatible with 3.3V and 5V input logic. The outputs are in phase with input signals. It has built-in UVLO functions and a shoot-through prevention circuit. It also includes a built-in common-mode dv/dt noise canceling circuit and internal dead-time of 400ns. It is suitable for applications such as SMPS, motor drive inverters, fluorescent lamp ballasts, and HID ballasts.

  • FAIRCHILD FAN7384 handbook

    The FAN7384 is a monolithic half-bridge gate-drive IC designed for high voltage, high speed driving MOSFETs and IGBTs operating up to +600V. Fairchild’s high-voltage process and common-mode noise canceling technique provide stable operation of high-side drivers under high-dv/dt noise circumstances. An advanced level-shift circuit allows high-side gate driver operation up to VS = -9.8V (typical) for VBS =15V. The UVLO circuits prevent malfunction when VDD and VBS are lower than the specified threshold voltage. Output drivers typically source/sink 250mA/500mA, respectively.

  • FAIRCHILD FAN7390 handbook

    The FAN7390 is a monolithic high- and low-side gate- drive IC, which can drive high speed MOSFETs and IGBTs that operate up to +600V.