Analog Devices Manuals

AD620 is a low cost low power instrumentation amplifier with a gain range of 1 to 10,000, a wide power supply range, excellent dc performance, low noise and excellent ac specifications. It is suitable for weighing scales, ECG and medical instrumentation, transducer interface, data acquisition systems, industrial process control and battery-powered and portable equipment.

The AD620 is a low-cost, low-power instrumentation amplifier featuring easy to use, wide power supply range, high performance, low power consumption, excellent DC performance, low noise, good AC characteristics, etc.

The AD594/AD595 is a monolithic thermocouple amplifier with cold junction compensation, low power consumption and low output impedance.

AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther- mocouple signal. Pin-strapping options allow it to be used as a linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output. The AD594/AD595 includes a thermocouple failure alarm that indicates if one or both thermocouple leads become open. The alarm output has a flexible f

The AD5934 is a high precision 12-bit impedance converter/network analyzer that measures resistances from 100 Ω to 10 MΩ at frequencies from 10 Hz to 100 kHz. The AD5934 operates from a 2.7 V to 5.5 V supply, has a temperature range of -40°C to +125°C, and comes in a 16-lead SSOP package.

The AD5934 is a high precision impedance converter, network analyzer, which can measure complex impedance, frequency range is 0.1Hz to 100kHz, measurement accuracy is 0.5%, supports 2.7 to 5.5V power supply, working temperature range is -40 to 125℃, package is 16-lead SSOP.

AD5933 is a high precision impedance converter system solution, which combines an on board frequency generator and 12-bit ADC, and can measure complex impedance.

The AD59321 is a programmable frequency scan waveform generator from AD company. It uses embedded digital processing to achieve enhanced frequency control. The device generates synthesized analog or digital frequency-stepped waveforms. Since frequency profiles are preprogrammed, continuous write cycles are eliminated, thereby freeing up valuable DSP/microcontroller resources. Waveforms start from a known phase and are incremented phase-continuously, which allows phase shifts to be easily determined. AD5932 consumes only 6.7 mA, providing a convenient low power solution to waveform generation. No external components are required. The output frequency is up to 25 MHz. Burst-and-listen capability. Pre-programmed frequency scan profiles can be used to create arbitrary frequency sweeps from 1 Hz to 25 MHz.

The document describes the features and characteristics of the Programmable Frequency Sweep and Output Burst Waveform Generator AD5930 from Dinghao, including programmable frequency profile, no external components required, output frequency up to 25 MHz, etc.

AD5930 programmable frequency sweep and output burst waveform generator is a frequency sweep/radar, network/impedance measurement, incremental frequency stimulus, sensory application, proximity and motion, BFSK frequency burst/pulse wave generator

AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. It features linear current output, wide temperature range, 2-terminal device, and high calibration accuracy.

AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. It features linear current output, wide temperature range, 2-terminal design, precise calibration, and low cost.

The AD1893 SamplePort is a fully digital, stereo Asynchronous Sample Rate Converter (ASRC) that solves sample rate interfacing and compatibility problems. The AD1893 has low cost, low power, and automatic sample frequency detection.

AD1892 is an AD company's digital audio receiver and asynchronous sample rate converter, supporting CP-1201, CP-340, IEC-958, AES/EBU, S/PDIF protocol, supporting 1:5 upsampling rate and 1:0.85 downsampling rate, with 120dB dynamic range, -113dB THD+N @ 1kHz, supports CRC calculation, supports four-wire SPI compatible serial control interface, supports mute input pin, supports power down mode, supports single +5V power supply, supports left-aligned, right-aligned and I2S-compatible mode of three-wire serial data interface, supports 28-lead SOIC package.