ANALOG Manuals

The ADL5535 is a 16 dB linear amplifier from Analog Devices that operates at frequencies up to 1 GHz. The device is internally matched and can be used in a wide variety of cellular, CATV, military, and instrumentation equipment.

The AD8354 is a broadband, fixed-gain, linear amplifier that operates at frequencies from 1 MHz up to 2.7 GHz. It is intended for use in a wide variety of wireless devices, including cellular, broadband, CATV, and LMDS/MMDS applications.

The AD8353 is a broadband, fixed-gain, linear amplifier that operates at frequencies from 1 MHz up to 2.7 GHz. It is intended for use in a wide variety of wireless devices, including cellular, broadband, CATV, and LMDS/MMDS applications. By taking advantage of ADI’s high performance, complementary Si bipolar process, these gain blocks provide excellent stability, high output power and low noise.

This datasheet provides detailed information about ADL5542, including features, specifications, etc.

The ADL5541 is a broadband 15 dB linear amplifier that operates at frequencies up to 6 GHz. The device can be used in a wide variety of CATV, cellular, and instrumentation equipment. The ADL5541 provides a gain of 15 dB, which is stable over frequency, temperature, power supply, and load conditions.

The ADL5602 is a broadband 20 dB linear amplifier that operates at frequencies up to 4 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment. The ADL5602 provides the highest dynamic range available from an internally matched gain block. This is accomplished by...

The ADL5601 is a broadband, 15 dB linear amplifier that operates at frequencies up to 4.0 GHz. The device can be used in a wide variety of cellular, cable television (CATV), military, and instrumentation equipment. The ADL5601 provides the highest dynamic range available from an internally matched gain block.

The ADL5323 is a high linearity GaAs driver amplifier from ADI that is internally matched to 50Ω for operation in the 1700MHz to 2400MHz frequency range. The amplifier, which has a gain of 20dB, has been specially designed for use in the output stage of a cellular base station radio or as an input preamplifier in a multicarrier base station radio.

The ADL5322 is a high linearity GaAs driver amplifier that is internally matched to 50 Ω for operation in the 700 MHz to 1000 MHz frequency range. The amplifier, which has a gain of 20 dB, is specially designed for use in the output stage of a cellular base station radio or as an input preamplifier in a multicarrier base station.

The ADL5320 is a broadband, linear driver RF amplifier that operates at frequencies from 400 MHz to 2700 MHz. The device can be used in a wide variety of wired and wireless applications, including ISM, WLL, PCS, GSM, CDMA, and W-CDMA. The ADL5320 operates with a 5 V supply voltage and a supply current of 104 mA. The ADL5320 is fabricated on a GaAs HBT process. The device is packaged in a low power, low cost SOT-89 package.

The ADL5321 is a broadband, linear driver RF amplifier that operates at frequencies from 2.3 GHz to 4.0 GHz. The device can be used in a wide variety of wired and wireless applications, including ISM, WLL, PCS, GSM, CDMA, and W-CDMA. The ADL5321 operates with a 5 V supply voltage and a supply current of 90 mA. The ADL5321 is fabricated on the GaAs HBT process. The device is packaged in a SOT-89 package.

The ADL5606 is a 1W RF driver amplifier that operates from 1800 MHz to 2700 MHz.

The ADL5605 is a broadband, two-stage, 1 W RF driver amplifier that operates over a frequency range of 700 MHz to 1000 MHz.

ADL5324 is a half-watt RF driver amplifier operating from 400 MHz to 4000 MHz with 14.6 dB gain, 43.1 dBm OIP3, 29.1 dBm P1dB, 3.8 dB noise figure, dynamically adjustable bias, low power supply current, no external bias resistor, and is used in wireless infrastructure, automated test equipment and ISM/AMR applications

ADG936/ADG936-R is a wideband dual SPDT switch with 36 dB isolation, operating in a single 1.65 V to 2.75 V supply. It features low power consumption and low insertion loss.