ANALOG Manuals

The AD10465 is a dual-channel, 14-bit, 65 MSPS analog-to-digital converter with analog input signal conditioning. It utilizes innovative high-density circuit design and laser-trimmed thin film resistor networks to achieve exceptional matching and performance, while maintaining excellent isolation and providing significant board area savings.

AD9235 is a 12-bit, 20/40/65 MSPS, 3 V A/D converter. The converter features single 3 V supply operation (2.7 V to 3.6 V), SNR = 70 dBc to Nyquist at 65 MSPS, SFDR = 85 dBc to Nyquist at 65 MSPS, low power (300 mW at 65 MSPS), differential input with 500 MHz bandwidth, on-chip reference and SHA, DNL = ±0.4 LSB, flexible analog input (1 V p-p to 2 V p-p range), offset binary or twos complement data format, clock duty cycle stabilizer, etc. The converter can be used in ultrasound equipment, IF sampling in communications receivers, IS-95, CDMA-One, IMT-2000, battery-powered instruments, hand-held scopemeters and low cost digital oscilloscopes.

AD7665 is a 16-Bit, 570 kSPS CMOS ADC from Analog Devices, Inc., with the following features:

AD7663 is a 16-bit, 250 kSPS CMOS ADC. It offers high precision, low distortion, and supports multiple input voltage ranges. The product features both parallel and serial interfaces, compatible with standards such as SPI®/QSPI™/MICROWIRE™/DSP. It operates on a single 5V supply, has low power consumption, and supports a power-down mode.

The AD7475/AD7495 are 12-bit, high speed, low power, successive-approximation ADCs that operate from a single 2.7 V to 5.25 V power supply with 1 MSPS throughput rate. They feature 4.5 mW max power and are suitable for battery powered systems, personal digital assistants, medical instruments, mobile communications, instrumentation and control systems, data acquisition systems and optical sensors applications.

The document describes a dual-channel, 12-bit, 80 MSPS ADC with analog input signal conditioning. It features a guaranteed sample rate of 80 MSPS, ±1% gain error for channel-to-channel matching, 90 dB channel-to-channel isolation, DC-coupled signal conditioning, 80 dB spurious-free dynamic range, selectable bipolar inputs (±1 V and ±0.5 V ranges), integral single-pole, low-pass Nyquist filter, twos complement output format, 3.3 V compatible outputs, and 1.85 W per channel power. It is suitable for radar processing, phased array receivers, multichannel, multimode receivers, GPS antijamming receivers, and communications receivers.

This document is about the AD9218 10-Bit, 40/65/80/105 MSPS 3 V Dual Analog-to-Digital Converter. The product features dual channels, 10-bit accuracy, multiple sampling rates, low power consumption, etc. It is suitable for applications such as battery-powered instruments, hand-held scopemeters, low-cost digital oscilloscopes, I and Q communications, ultrasound equipment, etc.

AD7671 is a 16-bit, 1Msps CMOS ADC with 16-bit resolution, no missing codes, S/N of 90dB, THD of -100dB, supports parallel and serial interfaces, and is packaged in a 48-lead LQFP

This document describes the features and characteristics of the AD9874 IF Digitizing Subsystem, including input frequency range, output signal bandwidth, noise figure, input impedance, supply voltage, etc.

The AD9433 is a 12-bit, 105 MSPS/125 MSPS IF sampling ADC with features such as high SNR, low distortion, and wide application range.

AD7783 is a single-channel, 24-bit �-� ADC with programmable input ranges (±2.56 V or ±160 mV), fixed 19.79 Hz update rate, simultaneous 50 Hz and 60 Hz rejection, 24-bit no missing codes, 18.5-bit p-p resolution (±2.56 V range), and 16.5-bit p-p resolution (±160 mV range).

AD7676 is a 16-bit, 500kSPS, differential ADC with ±1 LSB INL.

AD7675 is a 16-bit, 100 kSPS, differential ADC with the following features:

This is the datasheet of AD7677, AD7677 is a 16-bit, 1 LSB INL, 1 MSPS differential ADC.

The AD7650 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter (ADC) that provides 0 V to 2.5 V analog input voltage range, 5 V/3 V interface, SPI™/QSPI™/MICROWIRE™/DSP compatibility and single 5 V supply operation.