ANALOG Manuals

AD8178 is a 16X5 high performance video crosspoint switch, supports sync-on common-mode and sync-on color operating modes, supports single-ended and differential mode input, can directly drive the monitor.

The ADG2108 is an I2C CMOS 8 × 10 unbuffered analog switch array with dual/single supplies. It features an I2C-compatible interface, a high-speed I2C option up to 3.4 MHz, double-buffered input logic, simultaneous update of multiple switches, and more. It is suitable for various applications such as AV switching in TV, automotive infotainment, AV receivers, CCTV, ultrasound applications, KVM switching, telecom applications, test equipment/instrumentation, PBX systems, etc.

The ADG2128 is an 8 × 12 unbuffered analog switch array with dual/single supplies. It features a 3.4 MHz high speed I2C option, a 32-lead LFCSP_VQ (5 mm × 5 mm) package, double-buffered input logic, simultaneous update of multiple switches, a maximum on-resistance of 35 Ω, and a low quiescent current of less than 20 μA. It is suitable for AV switching in TV, automotive infotainment, AV receivers, CCTV, ultrasound applications, KVM switching, telecom applications, test equipment/instrumentation, and PBX systems.

ADG2188 is an 8x8 unbuffered analog switch array with dual/single supplies and I2C-compatible interface. It supports 3.4MHz high speed I2C option, 32-lead LFCSP_VQ (5mm x 5mm) package, double-buffered input logic, simultaneous update of multiple switches, bandwidth up to 300MHz, fully specified at dual ±5V/single +12V operation, on resistance 35Ω maximum, low quiescent current < 20μA. ADG2188 is widely used in TV AV switching, automotive infotainment, AV receivers, CCTV, ultrasound applications, KVM switching, telecom applications, test equipment/instrumentation, PBX systems.

The 300 MHz, 32 × 32 Buffered Analog Crosspoint Switch ADV3200/ADV3201 is a large, 32 x 32, nonblocking switch array that can be powered by a single 5 V supply, dual ±2.5 V supplies, or dual ±3.3 V supplies (G = +2). The switch array has excellent video performance, with a gain flatness of 0.1 dB at 60 MHz, a differential gain error of 0.1% (RL = 150 Ω), and a differential phase error of 0.1° (RL = 150 Ω). In addition, the switch array has excellent ac performance, with a bandwidth of >300 MHz, a slew rate of >400 V/μs, and a power consumption of 1.25 W.

The ADV3202/ADV3203 is a 300 MHz, 32×16 buffered analog crosspoint switch from Analog Devices. The product is available in G = +1 (ADV3202) or G = +2 (ADV3203) operation modes, with a single supply of +5 V, dual supplies of ±2.5 V or ±3.3 V (G = +2), and support for serial programming of the switch array and a 2:1 OSD insertion mux per output. The product also features a high impedance output disable function to allow connection of multiple devices while minimizing the output bus load. In addition, the product offers excellent video performance (60 MHz 0.1 dB gain flatness, 0.1% differential gain error, and 0.1° differential phase error), and excellent AC performance (bandwidth > 300 MHz, slew rate > 400 V/μs, power consumption 1 W, and low all hostile crosstalk -48 dB @ 5 MHz).

AD8150 is a 33 × 17, fully differential, nonblocking array with >1.5 Gbps per port NRZ data rate. It features low cost, low power, wide power supply range, low jitter, and no heat sinks required.

The document describes the features and characteristics of the 33×17, 3.2 Gbps Digital Crosspoint Switch AD8151 Rev. B.

ADG701L/ADG702L are monolithic CMOS SPST switches. These switches are designed using an advanced submicron process that provides low power dissipation, yet offers high switching speed, low on resistance, and low leakage currents.

The ADG841 and ADG842 are low voltage CMOS devices containing a single-pole, single-throw (SPST) switch. They have ultralow on resistance and excellent audio performance, making them suitable for applications such as handsets, battery-powered systems, and communication systems.

The ADG901/ADG902 is a dual-path switch that operates up to 4.5 GHz and uses a CMOS process for high isolation and low insertion loss.

ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on resistance, low on-resistance flatness, dual ±2.7 V to ±5.5 V or single +2.7 V to +5.5 V supplies, rail-to-rail input signal range, tiny 6-lead SOT-23; 8-lead MSOP; and 820 μm × 2255 μm die, low power consumption, TTL-/CMOS-compatible inputs are the features of this product.

This document describes the features and characteristics of the ADG417 LC2MOS precision mini-DIP analog switch, including maximum voltage supply, low on resistance, ultra-low power dissipation, and fast switching times. The product is suitable for precision test equipment, precision instrumentation, battery powered systems, and sample hold systems.

ADG741/ADG742 are CMOS low voltage 2Ω SPST switches with a single supply range of 1.8V to 5.5V. The switch on resistance is only 2Ω and the switching time is tON 18ns tOFF 12ns. The working frequency can reach 200MHz.