ANALOG Manuals

AD7683 is a 16-bit, 100 kSPS, single-ended PulSAR ADC in MSOP/QFN package.

AD9248 is a dual, 3V, 14-bit, 20MSPS/40MSPS/65MSPS analog-to-digital converter (ADC). It features dual high performance sample-and hold amplifiers, providing low power, low voltage and high resolution performance.

The AD7992 is a 12-bit, low power, successive approximation ADC with an I2C-compatible interface. The part operates from a single 2.7 V to 5.5 V power supply and features a 2 µs conversion time. The part contains a 2-channel multiplexer and track-and-hold circuit, which can convert two single-ended analog input channels to digital outputs. The AD7992's conversion time, input range, power consumption, and speed make it ideal for a variety of applications that require high accuracy and fast conversion, including instrumentation, data acquisition, medical devices, and industrial measurement.

AD7934-6 is a 4-channel, 625 kSPS, 12-bit parallel ADC with a sequencer from Analog Devices. It has a 2.5 V reference voltage on chip, and the input channels can be configured as 4-channel single-ended inputs, 2-channel fully differential inputs, or 2-channel pseudo differential inputs. AD7934-6 has an output rate of 625 kSPS, and the supply voltage range is 2.7 V to 5.25 V. The power consumption is 3.6 mW (3 V supply) and 7.5 mW (5 V supply).

AD7798/AD7799 is a 3-channel, low noise, low power, 16-/24-bit, Σ-Δ ADC with on-chip in-amp, supporting 3-wire serial SPI®, QSPI™, MICROWIRE™ and DSP compatible Schmitt trigger.

The AD6650 is a narrow-band receiver consisting of an integrated DVGA, IF-to-baseband demodulator, low pass filters, dual wideband ADC, programmable decimators and channel filters, VCO and phase-locked loop circuitry, serial data output ports. The AD6650 has a dynamic range of 116dB, a noise figure of 10dB, an input IP2 of +43dBm, an input IP3 of -9.5dBm, a 3.3V I/O and CMOS core, a microprocessor interface, and a JTAG boundary scan.

AD7942 is a 14-bit, 250 kSPS, pseudo differential ADC from Analog Devices, packaged in MSOP/QFN.

AD7745/AD7746 is a 24-bit capacitance-to-digital converter with temperature sensor.

AD7688 is a 16-Bit, 1.5 LSB INL, 500 kSPS PulSAR™ Differential ADC in MSOP/QFN package.

This is a datasheet for Analog Devices AD7687, a 16-bit, 1.5 LSB INL, 250 kSPS PulSAR™ Differential ADC. The product features include 16-bit resolution with no missing codes, 250 kSPS throughput, ±0.4 LSB typ, ±1.5 LSB max INL, 96.5 dB dynamic range, and more.

The AD7686 is a 16-bit, 500 kSPS PulSAR ADC in MSOP/QFN. Its features include 16-bit resolution, 500 kSPS sampling rate, ±0.6 LSB typical error, 92.5 dB @ 20 kHz SINAD, −110 dB @ 20 kHz THD, etc.

AD7266 is a dual 12-bit high precision low power SAR ADC with 3 differential inputs and 12 single-ended inputs, the sampling rate is 2MSPS, and it can use SPI/QSPI/MICROWIRE/DSP compatible high-speed serial interface to read data.

AD7265 is a dual 12-bit, 3-channel SAR ADC produced by AD company, with a sampling rate of 1MSPS. AD7265 has high precision, low power consumption and configurable input.

This document describes the features and characteristics of the AD6654 Rev. 0 product, including a 14-bit, 92.16 MSPS ADC, support for 4-/6-channel wideband IF to baseband receiver, etc.

AD7946 is a 14-bit, 500 kSPS PulSAR ADC with a pseudo differential analog input range of 0 V to REF, REF up to VDD, no pipeline delay, single-supply 5 V operation, 1.8 V/2.5 V/3 V/5 V logic interface, serial interface, SPI/QSPI/MICROWIRE™/DSP compatible, daisy-chain multiple ADCs and BUSY indicator.