TOSHIBA Manuals (Industrial)

TLP280 and TLP280-4 are very small and thin couplers, suitable for surface mount assembly in applications such as PCMCIA fax modem, programmable controllers.

File format: PDF Size:244 KB

TLP270D is a photocoupler produced by Toshiba. It has many functions and is widely used in mobile phones, laptops, PDAs, multimedia, TVs, modems and other products.

File format: PDF Size:249 KB

TLP270D is an integrated design photocoupler suitable for DAA circuits in modems. It has multiple functions including photorelay, photocoupler, Darlington transistor, bridge rectifier, and Zener diode. The product is suitable for mobile devices, notebooks, personal digital assistants, multimedia TVs, and modems, etc.

File format: PDF Size:249 KB

TLP2631 is a photocoupler from Toshiba. It consists of a pair of GaAℓAs light emitting diodes and an integrated high gain, high speed photodetector. The output is an open collector, Schottky clamped transistor. The device has overvoltage, overcurrent and overtemperature protection functions, and can be used for digital isolation, A/D, D/A conversion and other applications.

File format: PDF Size:213 KB

Dual photocoupler, input current threshold: IF = 5mA(max.), switching speed: 10MBd(typ.), transient immunity: ±1000V / μs(min.), temperature range: 0~70°C, isolation voltage: 2500Vrms(min.).

File format: PDF Size:213 KB

File format: PDF Size:384 KB

TOSHIBA TLP2630 dual photocoupler consists of a pair of GaAℓAs light emitting diode and integrated high gain, high speed photodetector. The output of the detector circuit is an open collector, schottky clamped transistor.This unit is 8−lead DIP. Input current threshold: IF = 5mA(max.) • LSTTL/TTL compatible: 5V supply • Switching speed: 10MBd(typ.) • Guaranteed performance over temperature: 0~70°C • Isolation voltage: 2500Vrms(min.) • UL recognized:UL1577, file no. E67349

File format: PDF Size:210 KB

The TLP2630 is a dual photocoupler produced by Toshiba. It consists of a pair of GaAℓAs light-emitting diodes and an integrated high gain, high speed photodetector. The output of the detector circuit is an open collector, �� schottky clamped transistor. This unit is 8-lead DIP. Input current threshold: IF = 5mA (max.) �� LSTTL/TTL compatible: 5V supply �� Switching speed: 10MBd (typ.) �� Guaranteed performance over temperature: 0~70°C �� Isolation voltage: 2500Vrms (min.) �� UL recognized:UL1577, file no. E67349

File format: PDF Size:211 KB

TLP2630 is a dual photocoupler manufactured by TOSHIBA, which has a high gain, high-speed photodetector. It uses GaAℓAs light emitting diode and integrated photodetector. The output is an open collector. It has features such as 5V supply, 10MBd switching speed, and 2500Vrms isolation voltage.

File format: PDF Size:211 KB

This document introduces the TLP261J photocoupler, which is suitable for applications such as programmable controllers and AC-output modules. The product features a peak off-state voltage of 600V, a trigger LED current of 10mA, and an on-state current of 70mA. It has a zero-crossing function and an isolation voltage of 3000V. Suitable for surface mount assembly.

File format: PDF Size:181 KB

TLP261J is a photocoupler launched by Toshiba. It features a small outline and surface mount. It supports 3000Vrms insulation voltage and a maximum working voltage of 600V. The maximum working current is 70mA.

File format: PDF Size:181 KB

TLP260J is a TOSHIBA photocoupler suitable for surface mount assembly. It consists of a photo-triac optically coupled to a gallium arsenide infrared-emitting diode. It has a peak off-state voltage of 600 V, a trigger LED current of 10 mA, an on-state current of 70 mA, and an isolation voltage of 3000 Vrms.

File format: PDF Size:211 KB

The TOSHIBA TLP260J is a photocoupler made by TOSHIBA. It consists of a phototriac optically coupled to a gallium arsenide infrared-emitting diode. The TLP260J has a rated peak off-state voltage of 600V, a trigger LED current of 10mA, an on-state current of 70mA, and an isolation voltage of 3000Vrms.

File format: PDF Size:211 KB

TLP260J is a photocoupler that consists of a phototriac optically coupled to a gallium arsenide infrared-emitting diode. This type of photocoupler is suitable for use in hybrid ICs as it is thinner and smaller than a 6-pin DIP photocoupler.

File format: PDF Size:211 KB

TLP2601 is a photocoupler from TOSHIBA that combines a GaAℓAs IRed as the emitter and an integrated high gain, high-speed photodetector. It features an isolated line receiver, simplex/multiplex data transmission, computer-peripheral interface, microprocessor system interface, and digital isolation for A/D, D/A conversion. It is a direct replacement for HCPL−2601.

File format: PDF Size:240 KB

TOSHIBA TLP2601 photocoupler is a combination of GaAℓAs IRed as the emitter and an integrated high gain, high speed photodetector.

File format: PDF Size:240 KB

TLP2530,TLP2531 is a dual photocoupler from TOSHIBA, consisting of a pair of GaAℓAs light emitting diodes and integrated photodetectors. This unit is an 8-lead DIP package. Separate connection for the photodiode bias and output transistor collectors improve the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.

File format: PDF Size:218 KB

This document describes the features of the TLP2530 and TLP2531 dual photocouplers. These photocouplers have high-speed transmission and isolation characteristics, making them suitable for applications such as digital logic isolation, line reception, power supply control, and switching power supplies.

File format: PDF Size:194 KB

The TOSHIBA TLP2530 and TLP2531 dual photocouplers consist of a pair of GaAℓAs light emitting diode and integrated photodetector. This unit is 8−lead DIP. Separate connection for the photodiode bias and output transistor collectors improve the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base−collector capacitance.

File format: PDF Size:218 KB

TLP251F is a photocoupler produced by Dinghao Company, suitable for gate driving circuit of IGBT or power MOSFET. It has characteristics such as input threshold current, supply current, output peak current, etc. Structural parameters include creepage distance, clearance, etc.

File format: PDF Size:166 KB