ST Manuals (Industrial)

STPS24045TV is a 4A power Schottky diode from STMicroelectronics. It is suitable for switched mode power supplies and high-frequency DC to DC converters. It features very small conduction losses, negligible switching losses, extremely fast switching speed, low thermal resistance and insulated package.

File format: PDF Size:149 KB

STPS16045TV is a power Schottky rectifier produced by STMicroelectronics. It has very small conduction losses, negligible switching losses, extremely fast switching speed and low thermal resistance. This device is suitable for switching power supplies, high frequency DC-DC converters and other applications.

File format: PDF Size:121 KB

This document is the datasheet of STPS12045TV, which is a power Schottky diode produced by ST. The diode has very small conduction loss, negligible switching loss, extremely fast switching speed and low thermal resistance. This diode is suitable for use in switched mode power supplies, high frequency DC-DC converters, low voltage, high frequency inverters, free wheeling and polarity protection applications.

File format: PDF Size:121 KB

BAT47 BAT48 are Schottky diodes featuring very low turn-on voltage and fast switching. These devices have integrated protection against excessive voltage such as electrostatic discharges.

File format: PDF Size:522 KB

BAT46 is a small signal Schottky diode with high breakdown voltage and low turn-on voltage

File format: PDF Size:29 KB

BAT42 BAT43 are Schottky diodes with very low turn-on voltage and fast switching characteristics.

File format: PDF Size:505 KB

BAT41 is a small signal Schottky diode featuring very low turn-on voltage and fast switching. This device has integrated protection against excessive voltage such as electrostatic discharges.

File format: PDF Size:147 KB

This file introduces the features and characteristics of BAR42FILM and BAR43FILM, including power rating, operating temperature range, reverse voltage, forward current, etc.

File format: PDF Size:58 KB

File format: PDF Size:0 KB

1N6263 is a Schottky diode with high breakdown voltage, low turn-on voltage and ultrafast switching speed. It is mainly intended for high level UHF/VHF detection and pulse applications with broad dynamic range.

File format: PDF Size:44 KB

The document describes the features and characteristics of the 1N5711 small signal Schottky diode. The diode features high breakdown voltage, low turn-on voltage, and ultrafast switching. It is primarily intended for high-level UHF/VHF detection and pulse applications with a broad dynamic range.

File format: PDF Size:43 KB

The L6210 is a monolithic IC containing eight Schottky diodes arranged as two separated diode bridges. This diodes connection makes this device versatile in many applications. They are used particular in bipolar stepper motor applications, where high efficient operation, due to low forward voltage drop and fast reverse recovery time, are required.

File format: PDF Size:148 KB

File format: PDF Size:0 KB

This is a document providing information on a product in full production. It describes the features and characteristics of the SPBT2632C1A Bluetooth technology class-1 module.

File format: PDF Size:579 KB

SPZB32W1x1.4 is a 2.4 GHz IEEE 802.15.4 compliant SMD module based on the ST STM32W chipset, featuring an integrated 2.4 GHz transceiver, PHY and MAC IEEE 802.15.4 features, ARM® Cortex-M3 core, embedded Flash and RAM, encryption (AES-128) accelerator, up to 20 dBm nominal TX output power, up to 105 dBm RX sensitivity, 16 channels (IEEE 802.15.4 channel 11 to 26), multiple configurable interfaces (UART, SPI, I2C, ADC, GPIOs), industry standard JTAG programming, 24 MHz and 32.768 kHz stable Xtal, less than 2 µA typ. power consumption in deep sleep mode (32.768 Xtal), multiple antenna options (integrated antenna or integrated UFL connector), multiple protocol stack options, single voltage supply (2.1 to 3.6 V), FCC and CE compliant qualified, small form factor (16.4 x 26.5 mm), operating temperature range: -40 °C to +85 °C.

File format: PDF Size:646 KB

This is a document containing information on the SPBT2532C2.AT2 Bluetooth® V2.1 + EDR module in full production. It describes the features and characteristics of the module.

File format: PDF Size:557 KB

This document provides information on a product in full production. It describes the features and characteristics of the SPBT2632C2A Bluetooth technology class-2 module.

File format: PDF Size:544 KB

SPIRIT1 is a low-data-rate, low-power sub-1GHz transceiver that supports 2-FSK, GFSK, MSK, GMSK, OOK and ASK modulation schemes, air data rates from 1 to 500 kbps, has excellent receiver sensitivity (-120 dBm), selectivity and blocking characteristics, very low power consumption (RX is 9 mA, TX is 21 mA, transmit power is programmable up to +11 dBm), fast start-up, and short frequency synthesizer settling time (6 µs), and has frequency offset compensation, integrated temperature sensor, battery indicator and low battery detector, RX and TX FIFO buffer (each 96 bytes), configurability via SPI interface, automatic acknowledgement, retransmission and timeout protocol engine, AES 128-bit encryption co-processor, antenna diversity algorithm, fully integrated ultra low power RC oscillator, internal timer wake-up and wake-up on external event, flexible packet length with dynamic payload length, sync word detection, address check, automatic CRC handling, FEC with interleaving, digital RSSI output, programmable carrier sense (CS) indicator, automatic clear channel assessment (CCA) before transmitting (for ISM band).

File format: PDF Size:823 KB

ST7580 is the STMicroelectronics company's FSK, PSK multi-mode system-on-chip for power line communication, which has a high-performance PHY processor and protocol engine, supports B-FSK, B-PSK, Q-PSK, 8-PSK modulation, dual channel operation mode, convolutional error correction coding, signal-to-noise ratio estimation, PNA mode against impulsive noise.

File format: PDF Size:825 KB

This document describes the features and characteristics of 2.4 GHz IEEE 802.15.4-compliant SMD modules based on the STM32W chipset, including integrated 2.4 GHz transceiver, ARM Cortex-M3 core, 128 kB embedded Flash, and 8 kB embedded RAM.

File format: PDF Size:358 KB