ST Manuals (Industrial)

The LM833 is a low noise dual operational amplifier from STMicroelectronics that is particularly well-suited to audio applications. It offers low voltage noise (4.5 nV/√Hz) and high frequency performances (15 MHz gain bandwidth product, 7 V/µs slew rate). In addition, the LM833 has a very low distortion (0.002%) and excellent phase/gain margins.

File format: PDF Size:181 KB

File format: PDF Size:0 KB

LM158, LM258 and LM358 are low power dual operational amplifiers. They have internal compensation, large DC voltage gain, wide bandwidth and other features.

File format: PDF Size:763 KB

The LM148 consists of four independent, high gain internally compensated, low power operational amplifiers which have been designed to provide functional characteristics identical to those of the familiar UA741 operational amplifier. In addition the total supply current for all four amplifiers is compatible to the supply current of a single UA741 type op amp. Other features include input offset current and input bias current which are much less than those of a standard UA741. Also, excellent isolation between amplifiers has been achieved by independently biasing each amplifier and using layout techniques qhich minimize thermal coupling. The LM148 can be used anywhere multiple UA741 type amplifiers are being used and in applications where amplifier matching or high packaing density is required.

File format: PDF Size:96 KB

LM346 is a low power, programmable four-channel amplifier with low input bias current, low noise voltage, wide power supply voltage range

File format: PDF Size:146 KB

The LM139, LM239, LM339 are low-power quad voltage comparators produced by ST company. They have wide single supply voltage range, low input bias current, low input offset current, low input offset voltage, input common-mode voltage range including ground, low output saturation voltage, differential input voltage range.

File format: PDF Size:545 KB

The LM124, LM224 and LM324 consist of four independent, high gain, internally frequency- compensated operational amplifiers. They operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

File format: PDF Size:1397 KB

LM119-LM219-LM319 is a precision high speed dual comparator designed to operate over a wide range of supply voltages. It features low input currents and high gains. The open collector of the output stage makes it compatible with TTL and capable of driving lamps and relays at currents up to 25mA.

File format: PDF Size:584 KB

This document describes the features of LF253 and LF353, two wide bandwidth dual JFET operational amplifiers. These amplifiers have low power consumption, wide common-mode and differential voltage range, low input bias and offset current, output short-circuit protection, high input impedance JFET input stage, internal frequency compensation, latch-up free operation, and high slew rate.

File format: PDF Size:906 KB

LF351 is a single JFET operational amplifier produced by ST company. It has the following features: internally adjustable input offset voltage, low power consumption, wide common-mode voltage range (up to VCC+), low input bias and offset current, output short-circuit protection, high input impedance JFET input stage, internal frequency compensation, no latch-up operation, high slew rate 16 V/µs (typical)

File format: PDF Size:617 KB

This document describes the features and characteristics of the LF147 - LF247 - LF347 series wideband quad J-FET operational amplifiers, including low power consumption, wide common-mode and differential voltage range, low input bias and offset currents, output short-circuit protection, high input impedance, internal frequency compensation, etc.

File format: PDF Size:293 KB

The L2726 is a monolithic integrated circuit in SO-20 package intended for use as power operational amplifiers in a wide range of applications including servo amplifiers and power supplies. It is particularly indicated for driving inductive loads, as motor and finds applications in compact-disc VCR automative, etc. The high gain and high output power capability provide superior performance whatever an operational amplifier/power booster combination is required.

File format: PDF Size:674 KB

L2720/2/4 is a low voltage dual power operational amplifier, which can output 1A current and supports single or split power supply. Its input voltage range is large, input offset voltage is low, output saturation voltage is low, and it has thermal shutdown function and clamp diode.

File format: PDF Size:933 KB

L272 is a dual power operational amplifier launched by STMicroelectronics, with a maximum output current of 1A, supporting single or dual power supply, commonly used in power amplifiers and switch power supplies.

File format: PDF Size:893 KB

The L165 is a 3A power operational amplifier with large common-mode and differential-mode ranges, SOA protection and thermal protection. It is intended for use in a wide range of applications, including servo amplifiers and power supplies.

File format: PDF Size:131 KB

RHFL4913A is a high-performance adjustable positive voltage regulator from ST. It has 3A low dropout voltage, embedded overtemperature and overcurrent protection, adjustable overcurrent limitation, output overload monitoring/signalling, adjustable output voltage, inhibit (ON/OFF) TTL-compatible control, programmable output short-circuit current, remote sensing operation and radiation resistance.

File format: PDF Size:426 KB

RHFL4913XX25 RHFL4913XX33 - RHFL4913XX50 is a high performance Rad-hard positive voltage regulator family, specifically intended for space and harsh radiation environments.

File format: PDF Size:262 KB

This is a document about Rad hard low voltage CMOS 16-bit bus buffer transceiver (3-state). The product features a voltage range of 1.65 to 3.6V for inputs and outputs, high-speed outputs, and 3.6V tolerance for inputs and outputs. It also has characteristics such as low power consumption, high-speed transmission, and radiation resistance.

File format: PDF Size:480 KB

This is a document about a low voltage CMOS 16-bit bus buffer transceiver (3-state). The product features include 1.65 to 3.6V inputs and outputs, high speed performance, 3.6V tolerance on inputs and outputs, power down protection, etc.

File format: PDF Size:474 KB

The 54VCXH162244 is a low voltage CMOS 16 bit bus buffer (non inverted) fabricated with sub-micron silicon gate and five-layer metal wiring C²MOS technology. It is ideal for low power and very high speed 1.65 to 3.6 V applications; it can be interfaced to 3.6 V signal environment for both inputs and outputs.

File format: PDF Size:453 KB