MAXIM Manuals (Industrial)

The MAX14778 is a dual 4:1 analog multiplexer that supports analog signals up to ±25V with a single 3.0 to 5.5V supply. Each multiplexer has separate control inputs to allow independent switching, making the device ideal for multiplexing different communications signals with the same connector pins.

File format: PDF Size:2299 KB

MAX4888B/MAX4888C are dual 8.0Gbps passive switches, ideal for switching two possible destinations of PCI ExpressM (PCIe) data. They support various high-speed interfaces, have superior bandwidth return loss, and come in a small form factor.

File format: PDF Size:915 KB

MAX4060/MAX4061/MAX4062 are differential-input microphone preamplifiers optimized for notebook and PDA audio systems. These devices feature adjustable gain with excellent power-supply rejection and common-mode rejection ratios, making them ideal for low-noise applications in portable audio systems. The MAX4060/MAX4062 are capable of switching their output between the differential input and a single-ended auxiliary microphone amplifier input. In addition, the MAX4060/MAX4062 have a low-noise microphone bias generator. The differential gain of the MAX4061/MAX4062 is set with a single resistor. The MAX4060 has a fixed gain of 10V/V and is PC99/2001 compliant. The MAX4061 includes a complete shut-down mode. In shutdown, the supply current is reduced to 0.3µA and the current to the microphone bias is cut off for ultimate power savings. The MAX4060 operates from a 4.5V to 5.5V single sup- ply and the MAX4061/MAX4062 operate from 2.4V to 5.5V. All devices are specified over the extended oper- ating temperature range, -40°C to +85°C. The MAX4060/MAX4061 are available in tiny 8-pin TDFN (3mm x 3mm x 0.8mm) and 8-pin µMAX® packages. The MAX4062 is available in a 10-pin µMAX package.

File format: PDF Size:560 KB

The MAX4063 is a differential-input microphone preamplifier optimized for high-performance, portable applications. The device features two selectable inputs, differential outputs, adjustable gain, an integrated low-noise bias source, and a low-power shutdown mode. Two input paths provide both differential and single-ended microphone sensing. The high-noise rejection of the differential input is ideally suited to an internal microphone where system noise and long-run PC board traces can degrade low-level signals. The single-ended input provides a simple connection to an external microphone. The differential and single-ended inputs have independent, adjustable gains that are set with a single external resistor. Differential outputs provide a full-scale signal of up to 6VP-P from a single 3V supply, optimizing the dynamic range of the amplified signal. A complete shut-down mode reduces the supply current to only 0.3µA and disables the microphone bias for the ultimate in power savings. The MAX4063 operates from 2.4V to 5.5V and is specified over the extended -40°C to +85°C operating temperature range. The MAX4063 is available in both 16-pin TQFN (4mm x 4mm x 0.8mm) and 14-pin TSSOP packages.

File format: PDF Size:223 KB

The MAX9860 is a low-power, voiceband, mono audio codec designed to provide a complete audio solution for wireless voice headsets and other mono voice audio devices.

File format: PDF Size:778 KB

The MAX9867 is an ultra-low power stereo audio codec designed for portable consumer devices such as mobile phones and portable gaming consoles. The device features stereo differential microphone inputs that can be connected to either analog or digital microphones. The single-ended line inputs, with configurable preamplifier, can be sent to the ADC for record or routed directly to the headphone amplifier for playback. An auxiliary ADC path can be used to track any DC voltage. The stereo headphone amplifiers support differential, single-ended, and capacitorless output configurations. Using the capacitorless output configuration, the device can output 10mW into 32Ω headphones. Comprehensive click-and-pop circuitry suppresses audible clicks and pops during volume changes and startup or shutdown. Utilizing Maxim’s proprietary digital circuitry, the device can accept any available 10MHz to 60MHz system clock. This architecture eliminates the need for an external PLL and multiple crystal oscillators. The stereo ADC and DAC paths provide user-configurable voice-band or audioband digital filters. Voiceband filters provide extra attenuation at the GSM packet frequency and greater than 70dB stopband attenuation at fS/2. The MAX9867 operates from a single 1.8V supply, and supports a 1.65V to 3.6V logic level. An I2C 2-wire seri- al interface provides control for volume levels, signal mixing, and general operating modes. The MAX9867 is available in a tiny 2.2mm 24-lead QFN package, suitable for applications with the most minimal space constraints.

File format: PDF Size:979 KB

The MAX9880A is a high-performance stereo audio codec designed for portable consumer applications such as smartphones and tablets. It operates from a single 1.8V supply to ensure low power consumption and offers a variety of input and output configurations for design flexibility.

File format: PDF Size:1912 KB

MAX9888 is a high performance, low power consumption audio CODEC produced by Maxim. The device supports two-way stereo audio output and two-way speaker drive. It also integrates low-pass filter, headphone amplifier, digital microphone interface, FM radio interface and other functions. It is suitable for portable audio devices.

File format: PDF Size:10500 KB

The MAX98088 is a full-featured audio codec whose high performance and low power consumption make it ideal for portable applications.

File format: PDF Size:11665 KB

The MAX98089 is a low-power, stereo audio codec with FlexSound technology. It is ideal for portable applications due to its high performance and low power consumption. It features Class D speaker amplifiers that provide efficient amplification for two speakers. The codec enables completely filterless operation with low radiated emissions. Integrated bypass switches allow for connection to an external amplifier when the Class D amplifiers are disabled. The IC also includes a stereo Class H headphone amplifier that maximizes efficiency and outputs a ground referenced signal without the need for output coupling capacitors. It also features a mono differential amplifier that can be configured as a stereo line output. The codec supports two differential analog microphone inputs and two PDM digital microphones. Integrated switches allow for an additional microphone input and routing of microphone signals to external devices. It can also be connected to FM radios or other sources with two flexible single-ended or differential line inputs.

File format: PDF Size:12041 KB

MAX9850 is a low-power, high-performance stereo audio DAC with an integrated DirectDrive headphone amplifier. The MAX9850 is designed to meet the board space and performance requirements of portable devices such as cell phones and MP3 and portable DVD players. The MAX9850 uses Maxim's DirectDrive headphone technology that produces a ground-biased analog audio output from a single supply, which allows for driving the headphones directly from the amplifier outputs without large DC-blocking capacitors. This feature saves board space, provides higher click/pop suppression, and improves low-frequency (bass) response. The architecture does not require the headphone jack to be biased to a DC voltage and thus allows for a conventional, grounded chassis design. The MAX9850's flexible clocking circuitry utilizes any available system clock up to 40MHz, eliminating the need for an external PLL and multiple crystal oscillators. The DAC supports a wide range of sample rates from 8kHz to 48kHz in both master and slave modes, making the MAX9850 the easiest to use and most versatile audio DAC available. It can also be operated like traditional synchronous DACs, at any integer-oversampling ratio. The audio DAC receives input data over a flexible 3-wire interface that supports left-justified, right-justified audio data, or I2S-compatible audio data. Stereo audio line inputs are provided to either mix analog audio with the digital input stream, or to drive the headphones.

File format: PDF Size:718 KB

The MAX5556 is a low-cost stereo audio sigma-delta digital-to-analog converter (DAC) that provides a simple and complete stereo digital-to-analog solution for media servers, set-top boxes, video-game hardware, automotive rear-seat entertainment, and other general consumer audio applications. It features built-in digital interpolation/filtering, sigma-delta digital-to-analog conversion, and analog output filtering. The MAX5556 receives input data over a 3-wire I2S-compatible interface with left-justified audio data. Sampling rates from 2kHz to 50kHz are supported. The device operates from a single +4.75V to +5.5V analog supply with total harmonic distortion plus noise below -87dB.

File format: PDF Size:639 KB

The MAX9789/MAX9790 combine a stereo, 2W Class AB speaker power amplifier with a stereo 100mW DirectDrive® headphone amplifier in a single device.

File format: PDF Size:524 KB

This product is a high-efficiency Class D stereo/mono audio power amplifier with a mono DirectDrive® receiver amplifier and a stereo DirectDrive headphone amplifier.

File format: PDF Size:653 KB

The MAX9796 combines a high-efficiency Class D, mono audio power amplifier with a mono DirectDrive™ receiver amplifier and a stereo DirectDrive headphone amplifier. Maxim’s 3rd-generation, ultra-low EMI, Class D audio power amplifiers provide Class AB performance with Class D efficiency. The MAX9796 delivers 2.3W into a 4Ω load from a 5V supply and offers efficiencies up to 80%. Active emissions limiting circuitry and spread-spectrum modulation greatly reduce EMI, eliminating the need for output filtering found in traditional Class D devices. The MAX9796 features a fully differential architecture, a full-bridged output, and comprehensive click-and-pop suppression. The device utilizes a flexible, user-defined mixer architecture that includes an input mixer, volume control, and output mixer. All controls are done through an I2C interface. The mono receiver amplifier and stereo headphone amplifier use Maxim’s DirectDrive architecture, that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space, and component height.

File format: PDF Size:422 KB

File format: PDF Size:0 KB

The MAX9791 combines a stereo 2W Class D power amplifier, a stereo 180mW DirectDrive® headphone amplifier, and a 120mA low-dropout (LDO) linear regulator in a single device. The MAX9792 combines a mono 3W Class D power amplifier, a stereo 180mW DirectDrive headphone amplifier, and a 120mA LDO linear regulator in a single device. The MAX9791/MAX9792 feature Maxim’s DirectDrive headphone amplifier architecture that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, board space, and component height. High 107dB DC PSRR and low 0.006% THD+N ensure clean, low-distortion amplification of the audio signal. The ground sense feature senses and corrects for the voltage difference between the output jack ground and device signal ground. This feature minimizes headphone amplifier crosstalk by sensing the impedance in the ground return trace and correcting for it at the output jack. This feature also minimizes ground-loop noise when the output socket is used as a line out connection to other grounded equipment (for example, a PC connected to a home hi-fi system). The MAX9791/MAX9792 feature low RF susceptibility, allowing the amplifiers to successfully operate in close proximity to wireless applications. The MAX9791/MAX9792 Class D amplifiers feature Maxim’s spread-spectrum modulation and active emissions limiting circuitry. Industry-leading click-and-pop suppression eliminates audio noise and pops.

File format: PDF Size:821 KB

The MAX9879 combines a high-efficiency stereo Class D audio power amplifier with a stereo capacitor-less DirectDrive® headphone amplifier. It provides Class AB performance with Class D efficiency, delivering up to 715mW of power into an 8Ω load with 88% efficiency from a 3.7V supply, extending battery life. The filterless modulation scheme, active emission limiting circuitry, and spread-spectrum modulation reduce EMI and eliminate the need for output filtering. The headphone amplifier delivers up to 58mW into a 16Ω load from a 3.7V supply. The device features a ground-referenced output, eliminating the need for large DC-blocking capacitors. It also includes a user-defined input architecture, preamplifier gain settings, input mixer, volume control, click-and-pop suppression, and I2C control. The bypass mode allows an external amplifier to drive the speaker connected to the MAX9879 outputs. The MAX9879 is available in a thermally efficient, space-saving 30-bump UCSP™ package.

File format: PDF Size:540 KB

MAX9875 is a high-efficiency Class D audio power amplifier with a built-in stereo AB-class capacitor-less DirectDrive headphone amplifier. This amplifier uses Maxim's third-generation filterless Class D amplifier technology with active emissions limiting technology to provide Class AB performance with Class D efficiency. The MAX9875 can provide up to 725mW of power from a 3.7V supply to an 8Ω load with an efficiency of 87%, extending battery life. The filterless modulation scheme combined with active emissions limiting circuitry and spread-spectrum modulation greatly reduces EMI while eliminating the need for output filtering used in traditional Class D devices. The stereo AB-class headphone amplifier in the MAX9875 uses Maxim's DirectDrive architecture, which produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space and component height. The device uses a user-defined input architecture, three preamplifier gain settings, an input mixer, volume control, comprehensive click-and-pop suppression and I2C control. The MAX9875 is available in a thermally efficient, space-saving 20-bump WLP package.

File format: PDF Size:491 KB

The document introduces the MAX97000 audio subsystem. The subsystem includes a mono Class D speaker amplifier and a Class H headphone amplifier, as well as an analog DPST switch. The subsystem is designed for maximum efficiency, high gain, low power consumption and low distortion. It is suitable for applications such as cell phones and portable multimedia players.

File format: PDF Size:3394 KB