ANALOG Manuals (Industrial)

The AD5641 is a single, 14-bit, buffered, voltage-out DAC that operates from a 2.7 V to 5.5 V supply and draws a maximum of 100 µA at 5 V. The device features guaranteed monotonicity, power-down, low power serial interface, on-chip output buffer amplifier, rail-to-rail operation, and SYNC interrupt facility. It is widely used in voltage level setting, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, and programmable attenuators.

File format: PDF Size:498 KB

AD5601/AD5611/AD5621 are 8/10/12-bit nanoDACs from Analog Devices, packaged in LFCSP and SC70, with a power supply range of 2.7V to 5.5V and a maximum operating current of 100µA. They have low power consumption, high precision, and small zero-code errors.

File format: PDF Size:535 KB

The AD5398 is a single 10-bit DAC with 120 mA output current sink capability. It features an internal reference and operates from a single 2.7 V to 5.5 V supply. The DAC is controlled via a 2-wire (I2C-compatible) serial interface that operates at clock rates up to 400 kHz. The AD5398 incorporates a power-on reset circuit, which ensures that the DAC output powers up to 0 V and remains there until a valid write takes place.

File format: PDF Size:435 KB

This is a 32-channel, 14-bit DAC with programmable 50 V to 200 V full-scale output voltage.

File format: PDF Size:372 KB

AD5378 Rev. A is a 32-channel, 14-bit, parallel and serial input, bipolar voltage output DAC from Analog Devices.

File format: PDF Size:430 KB

The AD5063 is a 16-bit single-channel precision D/A converter from Analog Devices. It has a 1 LSB INL and single power supply, and can operate in the 2.7V-5.5V voltage range. The AD5063 is packaged in a 10-lead MSOP, and consumes very little power. It also has a fast settling time and low noise. The AD5063 is suitable for industrial control, data acquisition, and portable instruments.

File format: PDF Size:344 KB

This document describes the features and characteristics of the 16-bit, 400 MSPS Digital-to-Analog Converter AD9726 Rev. B, including dynamic performance, precision calibrated linearity, LVDS inputs, and differential current outputs.

File format: PDF Size:406 KB

AD5602/AD5612/AD5622 are 8-/10-/12-Bit nanoDACs® with I2C®-Compatible Interface in LFCSP and SC70 packages, supplied by Analog Devices, with a power supply range of 2.7 V to 5.5 V, and a power consumption of less than 100 µA.

File format: PDF Size:479 KB

File format: PDF Size:0 KB

The AD5061 is a single channel 16-bit buffered voltage output DAC with a supply voltage range of 2.7 V to 5.5 V in a SOT-23 package. The device offers ±4 LSB of relative accuracy and guaranteed monotonicity with a ±1 LSB DNL specification. The AD5061 uses a 3-wire serial interface that operates at clock frequencies up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards. The AD5061's external reference voltage is provided by the VREF pin. A reference buffer is also provided on-chip. The device also incorporates a power-on reset circuit that ensures that the DAC output is at the midscale level when the VREF pin voltage is 0 V and at the zero level when the VREF pin voltage is 2.5 V.

File format: PDF Size:445 KB

The AD5678 is a low-power, octal DAC with on-chip reference in a 14-lead/16-lead TSSOP package. The AD5678 features three power-down functions, hardware LDAC and LDAC override function, CLR function to programmable code, and rail-to-rail operation. The AD5678 is suitable for applications such as process control, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage current sources, and programmable attenuators.

File format: PDF Size:728 KB

The AD5040 and the AD5060, members of the ADI nanoDAC family, are low power, single 14-/16-bit buffered voltage-out DACs that operate from a single 2.7 V to 5.5 V supply. They feature 1 LSB INL, power-on reset to midscale or zero scale, and guaranteed monotonicity. They are suitable for applications such as process control, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, and programmable attenuators.

File format: PDF Size:456 KB

This data sheet details the features and characteristics of the AD5450/AD5451/AD5452/AD5453 series of 8/10/12/14-bit high bandwidth multiplying DACs, including a 12MHz multiplying bandwidth, ±0.25LSB INL, 8-lead TSOT and MSOP packages, 2.5V to 5.5V operating voltage, ±10V reference input, 50MHz serial interface, 2.7MSPS update rate, extended temperature range (-40°C to +125°C), 4 quadrant multiplication, power-on reset and brownout detect, <0.4μA typical current consumption, and guaranteed monotonicity. This series of products is suitable for portable battery-powered applications, waveform generators, analog processing, instrumentation applications, programmable amplifiers and attenuators, digitally controlled calibration, programmable filters and oscillators, composite video, ultrasound, gain, offset, and voltage applications.

File format: PDF Size:565 KB

The AD5444/AD5446 are high bandwidth 12/14-bit serial interface multiplying DACs

File format: PDF Size:1225 KB

This document is AD5764's detailed information. AD5764 is a 16-bit high-precision, serial input, bipolar voltage output DAC produced by Analog Devices. AD5764 has a ±10 V, ±10.2564 V or ±10.5263 V output range, ±1 LSB maximum INL error and ±1 LSB maximum DNL error. AD5764 also has low noise, 10 μs maximum settling time, integrated reference buffers, output control circuitry, programmable short-circuit protection, LDAC simultaneous update, asynchronous CLR clear code, digital offset and gain adjustment, logic output control pins, etc. AD5764 is suitable for industrial automation, open-loop/closed-loop servo control, process control, data acquisition systems, automatic test equipment, automotive test and measurement, etc.

File format: PDF Size:523 KB

The document describes a dual 16-bit nanoDAC product called AD5663. It has a power supply range of 2.7V to 5.5V, operating current of 250μA, and Rail-to-Rail output capability. The product is suitable for applications such as process control, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, and programmable attenuators.

File format: PDF Size:719 KB

This document describes the Quad, 12-/14-/16-Bit nanoDACs with 5 ppm/°C On-Chip Reference, including AD5624R/AD5644R/AD5664R. These nanoDACs have features such as low power consumption, small package size, user-selectable external or internal reference, and guaranteed monotonicity.

File format: PDF Size:955 KB

The AD9704/AD9705/AD9706/AD9707 are the fourth-generation family in the TxDAC series of high performance, CMOS digital-to-analog converters. They feature a 175 MSPS update rate, low power dissipation, wide supply voltage range, adjustable full-scale current outputs, on-chip 1.0V reference, and more.

File format: PDF Size:2148 KB

The AD5680 is a single-channel, 18-bit digital-to-analog converter with 18-bit monotonicity and 12-bit accuracy. It is available in an 8-lead SOT-23 package and operates from a 4.5V to 5.5V power supply. The device features a power-on reset to zero scale/midscale, serial interface, rail-to-rail operation, and SYNC interrupt facility. It is suitable for closed-loop process control, low bandwidth data acquisition systems, portable battery-powered instruments, and gain and offset adjustment applications.

File format: PDF Size:486 KB

AD5624/AD5664 is a low power, quad nanoDAC with a voltage range of 2.7V to 5.5V. It has 12-bit and 16-bit relative accuracy and guaranteed monotonicity. It is suitable for applications such as process control, data acquisition systems, portable battery-powered instruments, etc.

File format: PDF Size:629 KB