3M Manuals (Industrial)

3M 7E50 Series CF Card Ejector for CompactFlash Header Type II Long Guides Manual

3M CF Card Ejector for CompactFlash Header, Type II, Long Guides 7E50 Series. 7E50 Series is a modular snap-on design with multiple button types for design flexibility. It can be used with either top or bottom mount (standard or inverse polarization) headers. It meets CFA standards for known compatibility and reliability.

File format: PDF Size:209 KB

3M Shielded Compact Ribbon (SCR) Connectors Wiremount Receptacle 362 Series Manual

3M 362 series Shielded Compact Ribbon (SCR) Wiremount Receptacle is the ideal mate for all 3M 3M™ Shielded Compact Ribbon (SCR) Boardmount and Wiremount Plugs, features robust ribbon style contact for reliable, repetitive plugging, 10 contacts can carry signal or power (up to one ampere per pin), has vibration resistant, solder termination for quick assembly with no dedicated tooling, accommodates up to 18AWG wire.

File format: PDF Size:219 KB

3M 3749 series

This document describes the features of 3M's 3M Round Conductor Flat Cable .025″ 30 AWG Solid, TPE 3749 Series S. The cable allows for higher signal density, excellent transmission properties, mass termination, and zippable branching or discrete termination. It meets SCSI-3 Fast-20 characteristic impedance requirements. The cable is insulated with Thermoplastic Elastomer (TPE) and is gray in color.

File format: PDF Size:212 KB

3M Test Burn-In PGA Kit Sockets Pin Grid Arrays Manual

TS-0675-09 is the specification sheet for 3M Electronic Test & Burn-In PGA Kit Sockets Pin Grid Arrays 10.

File format: PDF Size:268 KB

3M - MATERIAL SAFETY DATA SHEET (1)

3M™ EXL Unitized Debur and Finishing Wheels and Blocks, 4A FIN and 6A FIN are abrasive products produced by 3M Company. The main ingredients are aluminum oxide mineral, cured resin mixture, nylon fiber, polyester scrim, filler and silicone coated release liner.

File format: PDF Size:33 KB

3M 1182 Tape Copper Foil Conductive Adhesive on Both Sides Data Sheet

1182 Tape is a double-sided copper foil conductive adhesive tape from 3M company. It consists of a 1-ounce deadsoft copper foil backing that is coated on both sides with a unique electrically conductive pressure- sensitive acrylic adhesive. The product features that it can be used to bond two surfaces together, both electrically and physically, such as conductive gasket to a conductive surface as part of the EMI shielding solution for an electronic enclosure.

File format: PDF Size:167 KB

3M Mini D Ribbon (MDR) Connectors 102 Series

3M ™ Mini D Ribbon (MDR) connectors are boardmount through-hole right angle receptacle-shielded connectors with electrical characteristics of 1 A, 500 Vrms, and -55°C to 105°C. They have reliable repetitive plug-ins, rugged die cast metal case construction, SMT compatible PCT insulator material, reliable PCB retention, interface latch design, and IEEE 1284C interface.

File format: PDF Size:436 KB

3M - Adhesive Transfer Tapes with Adhesive 100 941 965 966 9461P 9461PC 9462P

3M™ Adhesive Transfer Tapes with Adhesive 100 941, 965, 966, 9461P, 9461PC, 9462P are designed for temperature exposure to 450°F (232°C) for short periods of time and/or solvent resistance. They have exceptional shear values even at elevated temperatures. They also offer low “outgassing” properties, which is an important consideration for the aerospace, automotive and electronic industries.

File format: PDF Size:101 KB

3M - 3M Interconnect Solutions Division 6801 River Place Blvd. Austin TX 78726-9000 For technical sales(2)

3M Eurosocket Type C (Rows A & C, A & B or A, B & C Filled) 62CXX Series TS-0813-01 is a high density connector produced by 3M company. It can be mated with DIN 41612 Type C headers and has a highly reliable contact design.

File format: PDF Size:57 KB

3M - 3M Vinyl Table Mat

This PDF document provides product data for the 3M™ Premium Vinyl Table Mat, a three-layer vinyl mat with excellent electrical properties. The mat meets the requirements of various standards and is a long-time industry favorite. The top layer is a tough and easy-to-clean dissipative vinyl, the center layer is a highly conductive metal scrim for quick charge dissipation, and the bottom layer is a durable non-skid cushion of dissipative foam. The mat is compatible with constant monitors and is available in rolls, mats, and mats with ground cord.

File format: PDF Size:222 KB

3M Pak 50 Wiremount Socket

3M™ Pak 50 Wiremount Socket .050″ Wiremount Socket for .025″ Pitch Cable P25E Series is a connector produced by 3M Company. It is mainly used for 30 AWG stranded 0.635 mm (25 mil) pitch flat PVC cable (3754 series). It supports Daisy chain connection and is compatible with P50 series IDC boardmount.

File format: PDF Size:251 KB

3M - 050″ Round Conductor Flat Cable 2010 Series

This document describes the features and characteristics of the .050" Round Conductor Flat Cable produced by 3M Interconnect Solutions Division. The cable features halogen-free insulation, which provides advantages of low smoke (BSS 7238) and low toxicity of combustion gases (NES 713), reducing the risk to firefighters, as well as low corrosivity of combustion gases (pH<6.0), reducing damage to nearby equipment. The cable utilizes 28 AWG stranded conductors on .050 inch pitch, allowing for mass terminations to a broad line of IDC connectors. It is zippable for branching or discrete termination. Please refer to the document for detailed information on the physical insulation material, color, marking standard, electrical parameters, and environmental temperature rating of the cable.

File format: PDF Size:26 KB

3M 3M Standard Sponge Coated on all four faces. Semi-flexible. Manual

The document introduces a standard sponge coated on all four faces. It is semi-flexible and available in two grit options: fine and medium.

File format: PDF Size:27 KB

3M Scotchlok UR2 UY2 UB2A Connectors Manual

3M Scotchlok UR2, UY2, and UB2A Connectors are among the industry's original IDC connectors. They feature technological advantages such as full wire range capability, increased port size to accommodate various insulation sizes, double elements in all products, and a new solvent resistant plastic construction.

File format: PDF Size:52 KB

3M Dual Conductor Fabric Wrist Band for Monitors (Premium Performance) 2368 handbook

This document presents the catalog of electronic products manufactured by 3M in Canada. It includes products related to carriers, static control personal grounding products, and the 3M Dual Conductor Fabric Wrist Band. The wrist band is made of a silver-plated, continuous thread woven together with elastic nylon, providing reliable protection, comfort, and conductivity.

File format: PDF Size:108 KB

3M Multi-Purpose Double Sided Tape 9088F handbook

We offer a variety of sizes of double-sided tape, suitable for high temperature environments, with filmic liners, clear tape, red liners.

File format: PDF Size:30 KB

3M 3M Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Rt. Angle Receptacle Shielded SCSI-2 Layout 102 Series handbook

The features and characteristics of 3M™ Mini D Ribbon MDR Connectors .050″ Boardmount Through-Hole Rt. Angle Receptacle – Shielded, SCSI-2 Layout 102 Series are as follows: The product is made of glass reinforced polyester insulation material with UL 94V-0 flame retardant rating. It has a black exterior, copper alloy contacts and nickel plating. The current rating is 1A, the insulation resistance is greater than 5×108Ω, the rated voltage is 500 VDC, and the temperature rating is 55°C to 105°C.

File format: PDF Size:1348 KB

3M Roloc + holders handbook

Product list

File format: PDF Size:25 KB

3M D Sub Connectors 50 Position EMI Junction Shell 3357-9250 Series handbook

The 3M 3357-9250 Series 50 Position EMI Junction Shell has the following features: Cast aluminum shell provides EMI/ESD protection; Spring latch allows positive, quick and easy connect and disconnect; Strain relief compensates for various round cable outside diameters; Nickel plating provides attractive and corrosion-resistant features.

File format: PDF Size:25 KB

3M Scotch General Purpose Masking Tape 2211 handbook

Scotch Tape 2211 is a utility purpose paper tape for fixing-, bundling-, holding- and sealing applications as well as for short term paint masking and other uses up to a temperature of 80 °C for one hour.

File format: PDF Size:17 KB

Brands



Products