LUMBERG Manuals (Industrial)

The 0308 series connector is designed based on the IEC 60130-9 standard, with an IP 68 waterproof and dustproof rating, and has a screw cap and welding terminals.

File format: PDF Size:507 KB

File format: PDF Size:0 KB

File format: PDF Size:48 KB

This is a circular connector with screw lock and solder terminals for front panel mounting.

File format: PDF Size:112 KB

This is a KLSM 3 connector produced by Lumberg, featuring 2 pin mono, with kink protection and solder terminals

File format: PDF Size:56 KB

This document is the datasheet of SV series round connectors. It introduces the features and characteristics of the product, including temperature range, materials, mechanical data, electrical data, etc.

File format: PDF Size:127 KB

This document introduces a 3.5 mm Jack connector according to JISC 6560 standard, designed for back side mounting on printed circuit boards. The product features a wide temperature range, low contact resistance, and high mating cycles.

File format: PDF Size:69 KB

The 1502 03 is a 2-pin 3.5mm mono jack socket from Lumberg. It has a break contact and can be soldered to a printed circuit board. The socket is rated for 1A and 34V AC/DC. Its contact resistance is 20mΩ and its insulation resistance is 108 Ω

File format: PDF Size:105 KB

This document describes the features and characteristics of the Netzgerätestecker Power supply connectors, including temperature range, materials, mechanical data, and electrical data.

File format: PDF Size:63 KB

This product is a RCA chassis socket, model BTOR 1, brand Lumberg. The product is made of PBT GF material, with CuZn copper-plated and tinned internal contact and CuZn copper-plated and nickel-plated external contact. The working temperature range is -20°C to +70°C, the insertion force is ≤30N, the separation force is 1-15N, and the mating life is 5000 times. The rated current is 2A, the rated voltage is 34V AC/DC, the test voltage is 500V/60s, and the insulation resistance is ≥108Ω.

File format: PDF Size:73 KB

This document introduces an Einbaustecker product launched by Lumberg in 2006, which complies with the IEC 60130-9 standard and has an IP 68 protection rating. It features a screw and solder connection method and is designed for front mounting. The product's characteristics include a wide temperature range (-40 °C to +85 °C), contact materials of CuZn (3-8 pins) and CuZn (12-14 pins), a Zn die-cast housing, a CuZn ring nut, and an NBR sealing ring.

File format: PDF Size:113 KB

KLS 10 2 100 is a 2-pole/mono straight plug with JST brand, the specification is 2.5mm, the contact is CuZn, the housing is PP, the rated current is 0.5A, the rated voltage is 34V AC/DC, the test voltage is 500V/60s, and the insulation resistance is ≥108 Ω

File format: PDF Size:48 KB

This document describes the SWUM™ flange-mounted connector, which is an IP 68/67 rated connector suitable for front mounting. It features a wide temperature range and durability.

File format: PDF Size:72 KB

This is a 3.5mm audio connector, supports 3 poles/stereo, with switch, suitable for PCB board

File format: PDF Size:103 KB

This document provides detailed information about KLS 40 3.5mm 3-pole/stereo straight jack connector, including product specifications, parameters, characteristics, etc.

File format: PDF Size:103 KB

This document describes the 2.5 mm Jack connectors according to JISC 6560 standard, with 3 poles/stereo, for back side mounting. It has a temperature range of -20°C to +70°C and is made of PBT GF, CuZn, and Cu alloy materials. The insertion force is 4-20 N, withdrawal force is 4-20 N, and it can withstand more than 5000 mating cycles. In terms of electrical parameters, the contact resistance is less than 50 mΩ, rated current is 0.5 A, rated voltage is 34 V AC/DC, and insulation resistance is greater than 10^8 Ω.

File format: PDF Size:51 KB

This document describes the KLB 3 model of Jack connectors. The connector complies with the JISC 6560 standard and has a 6.35 mm jack diameter. The connector can be mounted on the backside and features 3 poles/stereo jacks and solder eyes. It is suitable for a temperature range of -20°C to +70°C. The materials of the connector include a polycarbonate body, a nickel-plated CuZn contact bush, a nickel-plated Cu alloy solder terminal, a nickel-plated steel washer, and nut. It has an insertion force and withdrawal force of 5-40 N and can withstand more than 5000 mating cycles. The electrical characteristics of the connector include a ≤30 mΩ contact resistance, a rated current of 2 A, a rated voltage of 34 V AC/DC, and a test voltage of 250 V for 60 seconds. It is suitable for mating with KLS 3 and KLS 33 models of jack plugs.

File format: PDF Size:72 KB

This is a PDF file about circular connectors. The connector complies with IEC 60130-9 standard, has IP 40 protection rating, with threaded joint and soldering terminals. The connector has 3 to 12 pins, with a diameter of 1.0 mm.

File format: PDF Size:126 KB

SWUM™ installation plug is an IP 68/67 rated plug with screw fastening, compliant with IEC 61076-2-106 and AISG specifications, used for circuit board connections. The product has the characteristics of high and low temperature resistance, suitable for front and back installation. In terms of materials, the contact carrier is made of PA and CuZn, the housing is made of Zn-die casting, and the sealing ring is made of NBR. The product can be used with Kupplungen according to IEC 61076-2-106 and IEC 60130-9 standards. Electrically, the product has a rated current of 5A, a rated voltage of 60V AC, and an insulation resistance greater than 1 TΩ.

File format: PDF Size:182 KB

File format: PDF Size:79 KB