ANALOG Manuals

The AD1865 is a complete, dual 18-bit digital-to-analog converter (DAC) offering excellent THD+N and SNR performance while requiring no external components. It includes two complete signal channels, providing cophased voltage or current output signals and eliminating the need for output components.

File format: PDF Size:157 KB

The AD1892 is a complete EIAJ CP-340 (CP-1201), IEC-958, AES/EBU, S/PDIF compatible digital audio receiver and asynchronous sample rate converter. It features status pins and microprocessor interfaces for stand-alone and microcontroller-oriented operation. The product also integrates a channel status buffer and Q-channel subcode buffer, supporting EIAJ CP-2401. With a 20-bit SamplePort® architecture, it provides superb jitter rejection on the input port. The sample rate conversion ranges from 8 kHz to 48 kHz with a 1:5 upsampling range and a 1:0.85 downsampling range. It offers a dynamic range of 120 dB and -113 dB THD+N @ 1 kHz. Additionally, it includes features such as CRC calculation, a four-wire SPI™ compatible serial control port, mute input pin, power-down mode, single +5 V supply, flexible three-wire serial data port with multiple modes (left-justified, right-justified, and I2S-compatible). The AD1892 is widely used in DVD, DAT, MD, DCC, and CD-R recorders and players, computer multimedia products, DAB receivers, and automotive digital audio networks.

File format: PDF Size:232 KB

AD9980 is a high-performance 8-bit display interface with a maximum conversion rate of 95 MSPS, automated offset adjustment, various output format modes, etc.

File format: PDF Size:962 KB

The ADP3000 is a high-frequency switching regulator from Analog Devices. It features low power consumption, wide input voltage range, adjustable output voltage, and few external components. It is mainly used in notebook computers, palmtop computers, cellular phones, hard disk drives, portable instruments, pagers, etc.

File format: PDF Size:236 KB

This application note discusses the effects of clock phase noise and jitter on sampled systems and recommends considering system performance and cost when selecting clock circuits.

File format: PDF Size:292 KB

The AD8628/AD8629/AD8630 are wide bandwidth auto-zero amplifiers featuring rail-to-rail input and output swing and low noise.

File format: PDF Size:415 KB

AD1881A is an audio codec device that supports the AC'97 2.1 standard. It integrates 16-bit analog/digital converters and digital/analog converters, as well as audio input and output interfaces.

File format: PDF Size:262 KB

AD202/AD204 is a low-cost, miniature isolation amplifier with small size, low power consumption, high accuracy, high CMR, wide bandwidth, high CMV isolation, etc., which can be used in various applications such as multi-channel data acquisition, current shunt measurement, motor control, process signal isolation, high-voltage instrumentation amplifier, etc.

File format: PDF Size:929 KB

The ADXL202EB is a simple evaluation board that allows the user to quickly evaluate the performance of the ADXL202 dual axis ±2 g accelerometer. Only three additional through-hole passive components must be added, depending on the bandwidth required in your application.

File format: PDF Size:49 KB

The 7B47 is a thermocouple input module produced by Analog Devices. It can interface, amplify and filter input voltages from a J, K, T, E, R, S, B or N-type thermocouple and output a linear output voltage of either +1 V to +5 V or 0 V to +10 V. All 7B47 series modules are mix-and-match and hot swappable.

File format: PDF Size:530 KB

ADXL330 is a small, thin, low power, complete three axis accelerometer with signal conditioned voltage outputs, all on a single monolithic IC. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications.

File format: PDF Size:310 KB

The AD7541A is a low-cost, high-performance 12-bit monolithic multiplying digital-to-analog converter. It is fabricated using advanced, low-noise, thin-film CMOS technology and is available in a standard 18-lead DIP and in 20-terminal surface mount packages. The AD7541A is functionally and pin compatible with the industry standard AD7541 device and offers improved specifications and performance.

File format: PDF Size:228 KB

The SSM2602 Rev. 0 is a low-power audio codec with stereo, 24-bit analog-to-digital and digital-to-analog converters, a highly efficient headphone amplifier, and low power consumption.

File format: PDF Size:653 KB

REF02 is a precision voltage reference/temperature transducer with features including 5V output, ±0.3% maximum error, 1.96mV/°C temperature voltage output, ±3% adjustment range, 8.5ppm/°C maximum temperature stability, 15µV p-p maximum noise, 1.4mA maximum supply current, 7V to 40V wide input voltage range, and 10mA high load-driving capability.

File format: PDF Size:579 KB

File format: PDF Size:135 KB

File format: PDF Size:491 KB

ADXL320 is a low-cost, low-power, complete dual-axis accelerometer with signal conditioned voltage outputs, all on a single monolithic IC. The product measures acceleration with a full-scale ±5g, 60 Hz frequency. The ADXL320 features a small 4 mm × 4 mm × 1.45 mm LFCSP package, 2 mg resolution, wide supply voltage range of 2.4 V to 5.25 V, low power of 350 µA at VS = 2.4 V (typ), good zero g bias stability, good sensitivity accuracy, X-axis and Y-axis aligned to within 0.1° (typ), BW adjustment with a single capacitor, single-supply operation, and 10,000 g shock survival.

File format: PDF Size:454 KB

The SW06 is a four channel single-pole, single-throw analog switch with two normally open and two normally closed SPST switches with disable switches. It can be easily configured as a dual SPDT or a DPDT switch. The switch has a high static discharge destruction resistance and higher radiation resistance than analog switches designed with MOS devices.

File format: PDF Size:272 KB

File format: PDF Size:2132 KB

This document provides technical information to properly design a JTAG emulator interface for Analog Devices, Inc. (ADI) processor targets

File format: PDF Size:193 KB