LINEAR LT3464 handbook
The LT3464 is a micropower step-up DC/DC converter with integrated Schottky diode and output disconnect packaged in an 8-lead low profile (1mm) ThinSOT. The small package size, high level of integration, and the use of tiny SMT components yield a solution size of less than 40mm2. The LT3464 has a typical current limit of 115mA as well as fast switching speed to allow the use of a chip inductor and small ceramic capacitors. The internal PNP disconnects the output load from the input during shutdown, and also provides output short-circuit protection. An auxiliary reference input allows the user to override the internal 1.25V feedback reference with any lower value, allowing full control of the output voltage during operation. This device features a low 25µA quiescent current, which is further reduced to less than 1µA in shutdown. A current limited fixed off-time control scheme conserves operating current.
File format: PDF Size:254 KB
LINEAR LT1206 handbook
The LT1206 is a current feedback amplifier with high output current drive capability and excellent video char- acteristics. The LT1206 is stable with large capacitive loads, and can easily supply the large currents required by the capacitive loading. A shutdown feature switches the device into a high impedance, low current mode, reducing dissipation when the device is not in use. For lower bandwidth applications, the supply current can be reduced with a single external resistor. The low differen- tial gain and phase, wide bandwidth, and the 250mA minimum output current drive make the LT1206 well suited to drive multiple cables in video systems. The LT1206 is manufactured on Linear Technology’s proprietary complementary bipolar process.
File format: PDF Size:304 KB
LINEAR LT3463/LT3463A handbook
This datasheet provides details of the LT3463/LT3463A dual micropower DC/DC converters. These converters have internal Schottky diodes and are packaged in a 10-lead 3mm × 3mm DFN package. The negative and positive LT3463 converters have a current limit of 250mA. The LT3463A positive converter also has a 250mA limit, while the negative converter has a 400mA limit. Both devices have an input voltage range of 2.4V to 15V, making them ideal for a wide variety of applications. Each converter features a quiescent current of only 20µA, which drops to under 1µA in shutdown. A current limited, fixed off-time control scheme conserves operating current, resulting in high efficiency over a broad range of load current. The 42V switch enables high voltage outputs up to ±40V to be easily generated without the use of costly transformers. The low 300ns off-time permits the use of tiny, low profile inductors and capacitors to minimize footprint and cost in space-conscious portable applications.
File format: PDF Size:182 KB
LINEAR LT3483 handbook
This document introduces the features and characteristics of the LT3483 switch power converter. The converter is packaged in SOT-23 and integrates a Schottky diode and a resistor feedback. It has low quiescent current, low output short circuit protection, wide input range, etc.
File format: PDF Size:148 KB
LINEAR LT3462/LT3462A handbook
LT3462/LT3462A are general purpose fixed frequency current mode inverting DC/DC converters. Both devices feature an integrated Schottky and a low VCESAT switch allowing a small converter footprint and lower parts cost. The LT3462 switches at 1.2MHz while the LT3462A switches at 2.7MHz. These high speeds enable the use of tiny, low cost and low height capacitors and inductors. The LT3462/LT3462A operate in a dual inductor inverting topology that filters both the input and output currents. Very low output voltage ripple approaching 1mVP-P can be achieved when ceramic capacitors are used. Fixed frequency switching ensures a clean output free from low frequency noise typically present with charge pump solutions. The 40V switch allows a VIN to VOUT differential of...
File format: PDF Size:148 KB
LINEAR LT3461/LT3461A handbook
LT3461/LT3461A is a step-up DC/DC converter with integrated Schottky rectifier from the company schmitt power. It features fixed frequency operation, high output voltage, low Vcesat switch, 12V/70mA output voltage, 5V/115mA output voltage, wide input range, low shutdown current, soft-start and so on.
File format: PDF Size:147 KB
LINEAR LT3460 handbook
The LT3460 is a general purpose step-up DC/DC converter that switches at 1.3MHz. It uses tiny, low cost and low height capacitors and inductors, and has low, predictable output noise that is easy to filter. The LT3460 is rated for up to 38V, making it ideal for boost converters up to 36V. It is available in SC70 and SOT-23 packages.
File format: PDF Size:224 KB
LINEAR LT3439 handbook
The LT3439 is a push-pull DC/DC transformer driver that reduces conducted and radiated electromagnetic interference (EMI). Ultralow noise and EMI are achieved by controlling the output switch voltage and current slew rates. Slew rates are user adjustable to optimize output noise versus efficiency. The LT3439 can reduce high frequency harmonic content by as much as 40dB with only a minor decrease in efficiency. The LT3439 includes two 1A current limited power switches to ensure start-up under heavy loads. It also includes an oscillator that can be synchronized to an external clock for more accurate placement of switcher harmonics. Protection features include current limiting, undervoltage lockout, thermal shutdown and cross conduction prevention circuitry.
File format: PDF Size:188 KB
LINEAR LT3437 handbook
The LT3437 is a high voltage 500mA, 200kHz step-down switching regulator with 100µA quiescent current, suitable for various applications.
File format: PDF Size:509 KB
LINEAR LT3436 handbook
File format: PDF Size:0 KB
LINEAR LT3462/LT3462A handbook(1)
The LT3462/LT3462A are general purpose fixed frequency current mode inverting DC/DC converters. Both devices feature an integrated Schottky and a low VCESAT switch allowing a small converter footprint and lower parts cost. The LT3462 switches at 1.2MHz while the LT3462A switches at 2.7MHz. These high speeds enable the use of tiny, low cost and low height capacitors and inductors. The LT3462/LT3462A operate in a dual inductor inverting topology that filters both the input and output currents. Very low output voltage ripple approaching 1mVP-P can be achieved when ceramic capacitors are used. Fixed frequency switching ensures a clean output free from low frequency noise typically present with charge pump solutions. The 40V switch allows a VIN to VOUT differential of
File format: PDF Size:220 KB
LINEAR LT3435 handbook
The document is about LT3435, LT3435 is a high voltage 3A, 500kHz step-down switching regulator with 100µA quiescent current
File format: PDF Size:295 KB
LINEAR LT3434 handbook(1)
The LT ®3434 is a 200kHz monolithic buck switching regulator that accepts input voltages up to 60V.
File format: PDF Size:363 KB
LINEAR LT3433 handbook
File format: PDF Size:0 KB
LINEAR LT3434 handbook
LT3434 is a high-voltage 3A, 200kHz step-down switching regulator with 100µA quiescent current.
File format: PDF Size:363 KB
LINEAR LTC3780 handbook
The LTC ®3780 is a high performance buck-boost switching regulator controller that operates from input voltages above, below or equal to the output voltage. The constant frequency current mode architecture allows a phase-lockable frequency of up to 400kHz. With a wide 4V to 30V input voltage range and up to 98% efficiency, the LTC3780 is ideal for battery-powered and other high voltage applications.
File format: PDF Size:423 KB
LINEAR LTC3430 handbook
The LT3430 is a 200kHz monolithic buck switching regulator that accepts input voltages up to 60V. It features a high efficiency 3A, 0.1Ω switch, a current mode architecture, and special design techniques that achieve high efficiency over a wide input range.
File format: PDF Size:299 KB
LINEAR LTC3425 handbook
The LTC3425 is a synchronous, 4-phase boost converter with output disconnect capable of operation below 1V input. It includes four N-channel MOSFET switches and four P-channel synchronous rectifiers for an effective RDS(ON) of 0.045Ω and 0.05Ω, respectively. 4-phase operation greatly reduces peak inductor currents, and capacitor ripple current, and increases effective switching frequency, minimizing inductor and capacitor sizes. True output disconnect eliminates inrush current and allows zero load current in shutdown.
File format: PDF Size:302 KB
LINEAR LT3431 handbook
This datasheet introduces LT3431, a high voltage, 3A, 500kHz step-down switching regulator. It features a wide input range (5.5V to 60V), 3A peak switch current, small thermally enhanced 16-pin TSSOP package, constant 500kHz switching frequency, saturated switch design (0.1Ω), peak switch current maintained over full duty cycle range, effective supply current 2.5mA, shutdown current 30µA, 1.2V feedback reference voltage, easily synchronized, cycle-by-cycle current limiting and more.
File format: PDF Size:290 KB
LINEAR LT3420/LT3420-1 handbook(2)
The LT3420 and LT3420-1 are high efficiency photoflash capacitor chargers that charge a 220µF capacitor to 320V in 3.7 seconds or a 100µF capacitor to 320V in 3.5 seconds. This family uses standard transformers and features automatic refresh.
File format: PDF Size:242 KB