ANALOG Manuals
ANALOG DEVICES ADM803/ADM809/ADM810 handbook
ADM803/ADM809/ADM810 are microprocessor supervisory circuits produced by Analog Devices, featuring low power consumption, precision voltage monitoring, and multiple voltage options.
File format: PDF Size:123 KB
ANALOG DEVICES ADM205 ADM211/ADM213 handbook
The ADM2xx family of line drivers/receivers is intended for use as low-power, bidirectional, common-mode voltage differential line drivers/receivers for RS-232 interfaces.
File format: PDF Size:233 KB
ANALOG DEVICES ADG441/ADG442/ADG444 handbook
ADG441/ADG442/ADG444 are quad SPST switches with features of low power dissipation, high switching speed, low leakage current, etc., and are suitable for audio and video switching, automatic test equipment, precision data acquisition, battery-powered systems, sample hold systems, and communication systems.
File format: PDF Size:329 KB
ANALOG DEVICES Triple 8-Bit 140 MSPS A/D Converter AD9483 handbook
AD9483 is a triple 8-bit monolithic analog-to-digital converter optimized for digitizing RGB graphics signals from personal computers and other video sources.
File format: PDF Size:326 KB
ANALOG DEVICES AD5570 Data Sheet
The AD5570 is a 16-bit, ±12V/±15V, serial input, voltage output DAC from Analog Devices. It features 1LSB max INL and DNL, an output voltage range up to ±14V, and on-board reference buffers, eliminating the need for a negative reference.
File format: PDF Size:677 KB
ANALOG DEVICES AD5543/AD5553 Data Sheet
File format: PDF Size:0 KB
ANALOG DEVICES SDC/RDC1767/1768 Data Sheet
File format: PDF Size:0 KB
ANALOG DEVICES ADN2813 handbook(2)
The ADN2813 is a Clock and Data Recovery IC with Integrated Limiting Amplifier that supports a continuous rate of 10 Mb/s to 1.25 Gb/s. It exceeds SONET requirements for jitter transfer/generation/tolerance and features adjustable slice level, independent slice level adjust and LOS detector, no reference clock required, etc.
File format: PDF Size:1185 KB
ANALOG DEVICES High Speed Half-Duplex iCoupler Isolated RS-485 Transceiver ADM2486 handbook
The ADM2486 Rev. C is an half-duplex isolated RS-485 transceiver manufactured by Analog Devices, which complies with ANSI EIA/TIA 485-A and ISO 8482: 1987(E) standards, supports 20 Mbps data rate, operates at 5 V or 3 V, has high common-mode transient immunity (>25 kV/μs), isolated DE status output, open-circuit fault protection, thermal shutdown protection, up to 50 nodes on bus, and has been certified by UL, CSA and VDE. It works in the temperature range of -40°C to +85°C and is packaged in a wide body 16-lead SOIC package.
File format: PDF Size:295 KB
ANALOG DEVICES ADG511/ADG512/ADG513 Data Sheet
File format: PDF Size:0 KB
ANALOG DEVICES ADD8506 handbook
File format: PDF Size:0 KB
ANALOG DEVICES 12 LVDS/24 CMOS Output Clock Generator with Integrated 1.6 GHz VCO AD9522-4 handbook
The AD9522-4 is a 12 LVDS/24 CMOS output clock generator with integrated 1.6 GHz VCO.
File format: PDF Size:1613 KB
ANALOG DEVICES Low Noise Precision 16 V CMOS Rail-to-Rail Operational Amplifiers AD8663/AD8667/AD8669 handbook
AD8663/AD8667/AD8669 is a low noise, high precision, 16 V, CMOS, Rail-to-Rail operational amplifier from Analog Devices.
File format: PDF Size:1214 KB
ANALOG DEVICES 8-Bit 4-Channel Data Acquisition System AD8401 handbook
The AD8401 is a complete data acquisition and control system containing ADC, DAC, 4-channel MUX, and internal voltage reference. It offers high package density and reliability, with conversion times as short as 2us and an analog input bandwidth of 200kHz.
File format: PDF Size:226 KB
ANALOG DEVICES AD8193 handbook
This document describes the features and characteristics of the AD8193 Buffered 2:1 TMDS Switch, including 2 inputs, 1 output HDMI/DVI high-speed signal switch, compatibility with HDMI 1.3 standard, support for 4 TMDS channels, data rates from 250 Mbps to 2.25 Gbps, pixel clocks from 25 MHz to 225 MHz, fully buffered unidirectional inputs/outputs, support for input cables of more than 20 meters at 1080i, more than 10 meters at 1080p, and more than 6 meters at 1080p 12-bit color, matched 50Ω input and output terminations, and single-supply operation at 3.3V. The AD8193 is suitable for applications such as advanced television (HDTV) sets, multiple input displays, projectors, A/V receivers, and set-top boxes.
File format: PDF Size:464 KB
ANALOG DEVICES AD7865 handbook (1)
This document introduces the features and characteristics of AD7865 four-channel, simultaneous sampling, fast, 14-bit ADC.
File format: PDF Size:196 KB
ANALOG DEVICES AD7672 handbook
File format: PDF Size:1160 KB
ANALOG DEVICES AD7501/AD7502/AD7503 handbook
File format: PDF Size:196 KB
ANALOG DEVICES AD7118* handbook
The AD7118 is a CMOS multiplying D/A converter that attenuates an analog input signal over the range of 0 to -85.5 dB in 1.5 dB steps. The analog output is determined by a six-bit attenuation code applied to the digital inputs. The device operates in the frequency range from dc to several hundred kHz. It is manufactured using an advanced monolithic silicon gate thin-film on CMOS process and is packaged in a 14-pin dual-in-line package.
File format: PDF Size:198 KB
ANALOG DEVICES AD588* High Precision Voltage Reference handbook
The AD588 is a high precision voltage reference that features low drift (1.5 ppm/°C), low initial error (1 mV), pin programmable output (+10 V, +5 V, +65 V tracking, -5 V, -10 V), flexible output force and sense terminals, high impedance ground sense, machine insertable DIP packaging and MIL-STD-883 compliant versions.
File format: PDF Size:712 KB