ANALOG Manuals

AD5372/AD5373 is a 32-channel, 16/14-bit, serial input, voltage-output DAC. The maximum output voltage range is 4×VREF(20 V), and the output voltage range is -4 V to +8 V. Multiple independent outputs are supported. The system calibration function allows user-programmable offset and gain. Channel grouping and addressing features are supported. The Thermal Monitoring Function supports DSP/microcontroller-compatible serial interface. Digital levels comply with JEDEC standards. Power-on reset, digital reset, and clear functions are supported. DAC outputs can be updated simultaneously.

File format: PDF Size:308 KB

ADG811/ADG812/ADG813 are low voltage CMOS devices containing four independent SPST switches with low resistance and fast switching times.

File format: PDF Size:393 KB

The ADM709 is a power supply monitor that generates a system reset during power-up, power-down, and brownout conditions. When VCC falls below the reset threshold, RESET goes low and holds the µP in reset. On power-up the RESET output is held low for 140 ms after VCC rises above the thresh- old. The RESET output remains operational with VCC as low as the reset threshold.

File format: PDF Size:225 KB

AD9991 is a 10-bit CCD signal processor with a precision timing generator. It includes a complete analog front end with A/D conversion and a full-function programmable timing generator.

File format: PDF Size:754 KB

The ADP3308 is a member of the ADP330x family of precision low dropout anyCAP voltage regulators. It is pin-for-pin and functionally compatible with National’s LP2980, but offers performance advantages.

File format: PDF Size:116 KB

ADM660/ADM8660 is a pin compatible upgrade for the MAX660, MAX665, ICL7660 and LTC1046. It can provide input voltage inversion and double output functions with an output current of 100mA. It supports external clock input and shutdown function.

File format: PDF Size:94 KB

The ADCMP551/ADCMP552/ADCMP553 are high-performance single-supply PECL comparators from Analog Devices that feature 750 ps input-to-output propagation delay and 100 ps propagation delay dispersion, and are suitable for applications such as automatic test equipment, high-speed instrumentation, scope and logic analyzer front ends, window comparators, high-speed line receivers, threshold detection, peak detection, high-speed triggers, and patient diagnostics.

File format: PDF Size:523 KB

The AD9410 is a 10-bit monolithic sampling analog-to-digital converter with an on-chip track-and-hold circuit and is optimized for operation in high-speed communications and radar applications.

File format: PDF Size:316 KB

The AD8138 is a low distortion differential ADC driver with easy to use single-ended-to-differential conversion, adjustable output common-mode voltage, externally adjustable gain, low harmonic distortion, fast settling, low input voltage noise, wide supply range, low power, etc.

File format: PDF Size:535 KB

File format: PDF Size:1093 KB

The AD746 is a dual precision, 500 ns settling, BiFET op amp that offers excellent dc characteristics plus rapid settling times, high slew rate and low distortion. It is ideal for use as a dual output buffer for 12- and 14-bit DACs, input buffer for precision ADCs, wideband preamplifiers and low distortion audio circuitry.

File format: PDF Size:431 KB

AD5722R/AD5732R/AD5752R is a complete, dual, 12-/14-/16-bit serial input unipolar/bipolar voltage output DACs from Analog Devices.

File format: PDF Size:296 KB

The AD53040 is a high performance, high speed, low power differential output signal driver, packaged in a 20-pin SOP package, with a working voltage range of +2.7~+5.5V, and can be used in digital or mixed-signal test systems. The AD53040 has a built-in heat sink to effectively reduce chip temperature and ensure normal operation.

File format: PDF Size:115 KB

The REF01 is a precision voltage reference produced by Analog Devices. It has a 10 V output, a maximum error of ±0.3%, a minimum adjustment range of ±3%, excellent temperature stability, low noise, low current consumption, a wide input voltage range, high load driving capability, no external components, short circuit protection, etc. It is suitable for use in DACs and ADCs, portable instruments, motor control, power conversion and medical equipment.

File format: PDF Size:309 KB

AD9850 is a highly integrated device that uses advanced DDS technology coupled with an internal high speed, high performance, D/A converter and comparator, to form a com- plete digitally programmable frequency synthesizer and clock generator function.

File format: PDF Size:267 KB

The ADG736L is a low voltage 2.5Ω dual SPDT switch produced by Analog Devices. It is suitable for USB 1.1 signal switching circuits, mobile phones, PDAs, battery-powered systems, communication systems, sample-and-hold systems, audio signal routing, audio and video switching, and mechanical reed relay replacement.

File format: PDF Size:263 KB

The SSM2402/SSM2412 are dual analog switches designed specifically for high performance audio applications. Distortion and noise are negligible over the full audio operating range of 20 Hz to 20 kHz at signal levels of up to 10 V rms. The SSM2402/SSM2412 offer a monolithic integrated alternative to expensive and noisy relays or complex discrete JFET circuits. Unlike conventional general-purpose CMOS switches, the SSM2402/SSM2412 provide superb fidelity without audio “clicks” during switching. Conventional TTL or CMOS logic can be used to control the switch state. No external components are required.

File format: PDF Size:323 KB

The document describes the features and characteristics of Analog Devices' TigerSHARC and Blackfin Embedded Processor ADSP-BF536/ADSP-BF537.

File format: PDF Size:3578 KB

This document describes the features and characteristics of ADuC831, including 8-channel 12-bit ADC, dual 12-bit voltage output DACs, on-chip temperature sensor, and voltage reference. The product also features 62KB flash/EE program memory, 4KB flash/EE data memory, and 2304 bytes of data RAM. It utilizes an 8051 core with support for various peripheral interfaces and power modes. It is suitable for applications such as laser power control in optical networking.

File format: PDF Size:1300 KB

The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin selectable gains of –11 dB to +31 dB with a bandwidth of 90 MHz or 9 dB to 51 dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using one external resistor. The input referred noise spectral density is only 1.3 nV/√Hz and power con- sumption is 125 mW at the recommended ±5 V supplies. The decibel gain is “linear in dB,” accurately calibrated, and stable over temperature and supply. The gain is controlled at a high impedance (50 MΩ), low bias (200 nA) differential inp

File format: PDF Size:236 KB