ANALOG Manuals

This product is a precision monolithic operational amplifier with high accuracy and fast settling time.

File format: PDF Size:1645 KB

AD5040/AD5060 are single 14/16-bit buffered voltage output DACs from the nanoDAC family. They operate at 3V/5V and come in an 8-pin SOT23 package. They feature a low power serial interface, fast settling, and low power operation.

File format: PDF Size:802 KB

The AD5011 is an analog front end for two pair or single pair HDSL applications that use 1168 kbps or 2.32 Mbps data rates. The device integrates all the transmit and receive functional blocks.

File format: PDF Size:83 KB

The ADM811/ADM812 are reliable voltage monitoring devices suitable for use in most voltage monitoring applications. The ADM811/ADM812 are designed to monitor five different voltages, each allowing for a 5% or 10% degradation of standard PSU voltages before a reset occurs. These voltages have been selected for the effective monitoring of +3 V, +3.3 V, and +5 V.

File format: PDF Size:85 KB

This document introduces the features and characteristics of the ADDC02828SA power module, including 28V dc input, 28V dc @ 3.6 A, 100W output, integrated EMI filter, compliance with MIL-STD-461D standard, low weight of 80 grams, NAVMAT derating, etc.

File format: PDF Size:213 KB

The AD8325 is a low-cost, digitally controlled line driver with features such as programmable gain, low distortion, and low output noise level.

File format: PDF Size:304 KB

The AD7732 is a high precision, high throughput analog front end. With a total conversion time of 500 µs (2 kHz channel switching), true 16-bit p-p resolution is achievable, making it ideally suitable for high resolution multiplexing applications. The part can be configured via a simple digital interface, which allows users to balance the noise performance against data throughput up to a 15.4 kHz.

File format: PDF Size:449 KB

The AD600/AD602 are dual channel, low noise, wideband variable gain amplifiers optimized for use in ultrasound imaging systems, but are applicable to any application requiring very precise gain, low noise and distortion, and wide bandwidth. Each independent channel provides a gain of 0 dB to +40 dB (AD600) and –10 dB to +30 dB (AD602). The AD600/AD602 output impedance is 50 Ω and offers low distortion, low noise and wide bandwidth.

File format: PDF Size:680 KB

AD5231/AD5232/AD5233 are nonvolatile memory digital potentiometers that maintain the wiper settings. They provide single-, dual-, and quad-channel programmable resistors with different resolutions and terminal resistances. This product can be used as a replacement for mechanical potentiometers for applications such as gain and offset adjustment, programmable voltage to current conversion, programmable filters, delays, time constants, etc.

File format: PDF Size:223 KB

File format: PDF Size:608 KB

The AD1958 is an Analog Devices 5V stereo audio DAC system that accepts 16-/18-/20-/24-Bit data, supports 24 Bits, 192 kHz sample rate, and accepts a wide range of sample rates, including 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz and 192 kHz. It features a multibit Sigma-Delta modulator with “Perfect Differential Linearity Restoration” for reduced idle tones and noise floor, Data Directed Scrambling DAC—Least Sensitive to Jitter, Single-Ended Output for Easy Use, and Signal-to-Noise (Not Muted) at 48 kHz Sample Rate (A-Weighted Stereo) 109 dB.

File format: PDF Size:126 KB

7B47 is an isolated, linearized thermocouple input module from Analog Devices. It accepts input voltages from a J, K, T, E, R, S, B or N-type thermocouple, amplifies and filters them, and outputs a precision output of either +1 V to +5 V or 0 V to +10 V, linear with input temperature. All 7B47 series modules are mix-and-match and Hot Swappable.

File format: PDF Size:530 KB

The SSM2402/SSM2412 are dual analog switches designed spe- cifically for high performance audio applications. Distortion and noise are negligible over the full audio operating range of 20 Hz to 20 kHz at signal levels of up to 10 V rms.

File format: PDF Size:325 KB

The OP90 is a high performance, micropower op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V.

File format: PDF Size:1136 KB

File format: PDF Size:600 KB

This document is the evaluation board datasheet for Analog Devices AD766X/AD767X 16-bit A/D converter family.

File format: PDF Size:1838 KB

This is a document about ADP3801/ADP3802, ADP3801/ADP3802 is a high frequency switch mode dual lithium ion battery charger manufactured by Analog Devices. The charger has high end of charge voltage accuracy, intelligent end of charge output signal pin, programmable cell number selection, on-chip 3.3V LDO regulator, programmable charge current with high side sense, soft start charge current, undervoltage lockout, drives external PMOS, 10% adjustable end of charge voltage and charges NiCad, NiMH batteries (with external controller).

File format: PDF Size:261 KB

This document is the function description file of ADAV801 audio codec. It introduces the features of the product, including analog-to-digital converter, digital-to-analog converter, sample rate converter, digital interface, clock generator, etc.

File format: PDF Size:881 KB

AD8331/AD8332 are single- and dual-channel ultralow noise, linear-in-dB, variable gain amplifiers. Although optimized for ultrasound systems, they are usable as low noise variable gain amplifiers. They provide up to 43.5 dB of linear variable gain with low output-referred noise and high input impedance matching.

File format: PDF Size:466 KB

ADR01/ADR02/ADR03/ADR06 are ultracompact 10 V/5 V/2.5 V/3.0 V voltage references, featuring low temperature drift, low noise, high output current and wide operating range.

File format: PDF Size:528 KB