ANALOG Manuals

File format: PDF Size:0 KB

AD588 is a high precision, dual-tracking voltage reference developed by Analog Devices, Inc. It features low drift, low initial error, and programmable output

File format: PDF Size:525 KB

AD1890/AD1891 are Analog Devices' seamless transition asynchronous sample rate converters that operate in the range of 8kHz to 56kHz and support from 1:2 to 2:1 sample rate ratios.

File format: PDF Size:417 KB

The AMP02 is the first precision instrumentation amplifier available in an 8-lead package. Gain of the AMP02 is set by a single external resistor and can range from 1 to 10,000. No gain set resistor is required for unity gain. The AMP02 includes an input protection network that allows the inputs to be taken 60 V beyond either supply rail without damaging the device. Laser trimming reduces the input offset voltage to under 100 µV. Output offset voltage is below 4 mV, and gain accuracy is better than 0.5% for a gain of 1000. ADI’s proprietary thin-film resistor process keeps the gain temperature coefficient under 50 ppm/°C. Due to the AMP02’s design, its bandwidth remains very high over a wide range of gain. Slew rate is over 4 V/µs, making the AMP02 ideal for fast data acquisition systems.

File format: PDF Size:220 KB

AD1854 is an audio decoder chip from Analog Devices. It supports 16-/18-/20-/24-bit data, supports 24 bits and 96kHz sampling rate, and has a multi-bit Sigma-Delta modulator and differential output. The dynamic range is 113dB, the signal-to-noise ratio is 112dB, and the THD+N is -101dB.

File format: PDF Size:391 KB

The datasheet provides the functions and features of ADV7123 240MHz Triple 10-Bit High Speed Video DAC.

File format: PDF Size:365 KB

AD9826 is a 16-Bit 15 MSPS A/D Converter chip produced by Analog Devices. It supports 3-Channel 16-Bit Operation up to 15 MSPS and 1-Channel 16-Bit Operation up to 12.5 MSPS. It also supports Correlated Double Sampling, 1~6� Programmable Gain, �300 mV Programmable Offset, Input Clamp Circuitry, Internal Voltage Reference, Multiplexed Byte-Wide Output, Optional Single Byte Output Mode, 3-Wire Serial Digital Interface, 3 V/5 V Digital I/O Compatibility, 28-Lead SSOP Package and Low Power CMOS: 400 mW (Typ) Power-Down Mode Available.

File format: PDF Size:148 KB

This document introduces a small and thin ±2 g accelerometer, ADXL322. The product has a resolution of 2 mg at 60 Hz. It features a wide supply voltage range, low power consumption, good zero g bias stability, and sensitivity accuracy. The accelerometer is suitable for cost-sensitive motion and tilt sensing applications, such as smart handheld devices, mobile phones, sports and health-related devices, PC security, and PC peripherals.

File format: PDF Size:395 KB

File format: PDF Size:507 KB

This document provides a guide to ordering SSM2210 audio dual matched NPN transistors, including temperature range, package, and packaging options.

File format: PDF Size:1796 KB

The AD8021 is an exceptionally high performance, high gain, low noise, low power, wideband amplifier that can be used in ADC preamps and drivers, instrumentation preamps, active filters, portable instrumentation, line receivers, precision instruments, ultrasound signal processing, and high gain circuits.

File format: PDF Size:661 KB

The ADM3202/ADM3222/ADM1385 transceivers are high speed, 2-channel RS-232/V.28 interface devices that operate from a single 3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) make them ideal for battery-powered portable instruments. The ADM3202/ADM3222/ADM1385 parts are available in PDIP, SOIC_N, SOIC_W, SSOP, and TSSOP packages.

File format: PDF Size:334 KB

The AD589 is a 2-terminal, low cost, temperature compensated band gap voltage reference that provides a fixed 1.23 V output voltage for input currents between 50 μA and 5.0 mA.

File format: PDF Size:316 KB

The AD22100 is a temperature sensor produced by Analog Devices. It features high accuracy, good linearity, wide temperature range and wide application scenarios.

File format: PDF Size:243 KB

AD7008 is a CMOS DDS modulator from Analog Devices, which features single +5 V supply, 32-bit phase accumulator, on-chip COSINE and SINE look-up tables, on-chip 10-bit DAC, frequency, phase and amplitude modulation, parallel and serial loading, software and hardware power down options, 20 MHz and 50 MHz speed grades.

File format: PDF Size:506 KB

The AD9806 is a complete analog signal processor for CCD applications. It features an 18 MHz single-channel architecture, supporting 0 dB to 34 dB gain range of low noise PGA, low noise clamp circuits and analog pre-blanking function.

File format: PDF Size:129 KB

The AD594/AD595 is an integrated temperature sensor with cold junction compensation, which can be used with Type J, Type K and Type T thermocouples. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a thermocouple signal. Pin-strapping options allow it to be used as a linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output. The AD594/AD595 includes a thermocouple failure alarm that indicates if one or both thermocouple leads become open. The alarm output has a flexible format which includes TTL driver output, integrated circuit driver output and passive decoder output.

File format: PDF Size:137 KB

File format: PDF Size:0 KB

The ADuC812 is an 8051-based microcontroller core with 8-channel 12-bit ADC and embedded Flash, with high precision, high speed and low power consumption.

File format: PDF Size:1338 KB

The AD8307 is a low cost DC-500MHz, 92dB logarithmic amplifier. It features a complete multistage logarithmic amplifier, 92dB dynamic range, single supply operation of 2.7V, and can be powered up in 100ns.

File format: PDF Size:395 KB