Board manuals, page 3
PHILIPS PBSS2515VPN handbook
PBSS2515VPN is a low Vcesat NPN/PNP dual transistor produced by PHILIPS, with a feature of low power consumption (300mW), small package (1.6x1.2mm), and can be used in switching, driving, backlighting, audio amplification and other occasions.
PHILIPS PBSS2515M handbook
PBSS2515M is a 15V, 0.5A NPN low VCEsat (BISS) transistor with low collector-emitter saturation voltage VCEsat, high collector current capability IC and ICM, high efficiency, reduced heat generation and reduced printed-circuit board requirements. Suitable for power management, peripheral driver and other applications.
PHILIPS PBSS2515F handbook
This document describes the features and applications of the PBSS2515F 15V low VCEsat NPN transistor.
PHILIPS PBSS2515VS handbook
PBSS2515VS is a low VCEsat NPN double transistor produced by PHILIPS. It has 300mW total power dissipation, 1.6x1.2mm ultra thin package, excellent coplanarity, low collector-emitter saturation voltage, high current capability, improved thermal performance and flat lead.
TOSHIBA Bi CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC TB62600FG handbook
TB62600FG is an integrated circuit specifically designed for 64-bit thermal head drivers. It is designed to be used together with Bi-CMOS (DMOS) integrated circuits. The device consists of a 64-bit shift register, dual 64-bit latches, and 64 output DMOS structures.
TOSHIBA BiCMOS Linear Integrated Circuit Silicon Monolithic TB6066FNG Manual
The TB6066FNG is a shock sensor IC produced by Toshiba. The chip operates from 2.7 to 5.5 volts DC and outputs a low-level signal. The chip has good signal-to-noise ratio and can be used in mechanical control systems such as servo control.
Philips ISP1123 Universal Serial Bus compound hub Preliminary speci cation
The ISP1123 is a USB 1.1 compliant compound Universal Serial Bus (USB) hub device. It integrates a Serial Interface Engine (SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage regulator.
philips ISP1122 Universal Serial Bus stand-alone hub User Guide
ISP1122 is a USB hub device from ISP company, supports 2 to 5 downstream ports, has low power consumption and can be powered by bus, self-powered or hybrid-powered
philips ISP1109 Universal Serial Bus transceiver with carkit support User Guide
ISP1109 is a USB transceiver device that supports CEA−936−A, Mini-USB Analog Carkit Interface. It is fully compliant with Universal Serial Bus Specification Rev. 2.0. The ISP1109 can transmit and receive serial data at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. The ISP1109 is available in HVQFN32 package.
philips ISP1105/1106/1107 Advanced Universal Serial Bus transceivers User Guide
The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA). They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer of the Universal Serial Bus. They have an integrated 5 V to 3.3 V voltage regulator for direct powering via the USB supply VBUS. The ISP1105/1106/1107 range can be used as a USB device transceiver or a USB host transceiver. They can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.
philips ISP1102 Advanced Universal Serial Bus transceiver User Guide
The ISP1102 Universal Serial Bus (USB) transceiver is fully compliant with the Universal Serial Bus Specification Rev. 2.0. It can transmit and receive USB data at full-speed (12 Mbit/s). The transceiver allows USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 to 3.6 V to interface with the physical layer of the USB. It has an integrated 5 V-to-3.3 V voltage regulator for direct powering via the USB supply line VBUS. The transceiver has an integrated voltage detector to detect the presence of the VBUS voltage (VCC(5.0)). When VCC(5.0) or Vreg(3.3) is lost, the D+ and D- pins can be shared with other serial protocols. The transceiver is a bi-directional differential interface and is available in HBCC16 and HVQFN14 packages. It is ideal for use in portable electronic devices, such as mobile phones, digital still cameras, personal digital assistants and information appliances.
philips PZM-N series Voltage regulator diodes DATA SHEET
The PZM-N series is a low power general purpose voltage regulator diode produced by Philips Semiconductors. It is packaged in a SOT346 (SC59) plastic package and is suitable for surface mount design. The diode has a wide working voltage range of 2.4 to 75 V (E24 range) and a maximum total power dissipation of 300 mW.
EPSON RC+ 3.5.0 Release Notes Manual
This document is about EPSON RC+ 3.5.0 release notes, which contains the latest information about this release and the things that need to be known before using this software
EPSON RC+5.0 Manual
This is the EPSON RC+ 5.0 User's Guide, version 5.4. This manual contains information on how to correctly use the Manipulator.
SYSMAC mini Programmable Controllers SK20-C Operation Manual
This document is the operation manual for OMRON SYSMAC mini Programmable Controllers SK20-C�D�-D. It describes the precautions and safety measures for using the product.