Key facts
- Brand
- Toyota
- Model
- RAV4 EV
- Category
- Electric cars
- Industry
- Automotive
- Documents
- 2
- Languages
- EN
- Last added
- 2026-11-14
Start here

Toyota RAV4 EV Electric Vehicle Maintenance Manual
Section 8 of the Toyota RAV4 EV manual covers do-it-yourself chassis maintenance. It explains checking and adding traction motor coolant, radiator condition, brake fluid, power steering fluid, and tire pressure, plus tire inspection, replacement, rotation, snow tires and chains, wheel replacement, and aluminum wheel precautions.
Fluid guidance includes ethylene-glycol coolant, SAE J1703 or DOT 3 brake fluid, and Toyota P.S. fluid EH. Tire guidance includes cold pressure checks, tread wear indicators at 1.6 mm, and snow tire size 215/70R16 at 180 kPa.
Toyota RAV4 EV specifications
| Coolant type | Ethylene-glycol type coolant; Toyota Long Life Coolant or equivalent |
|---|---|
| Coolant solution | 50% for protection to about -35 C (-31 F); 60% for about -50 C (-58 F); do not exceed 70% |
| Brake fluid | SAE J1703 or FMVSS No. 116 DOT 3 |
| Power steering fluid | Toyota P.S fluid EH or equivalent |
| Snow tire size | 215/70R16 |
| Snow tire pressure | 180 kPa (1.8 bar, 26 psi) |
| Tread wear indicator | 1.6 mm (0.06 in.) |
| Snow tire tread | below 4 mm (0.16 in.) loses effectiveness |
| Tire age check | over six years old |
All Toyota RAV4 EV documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What coolant should be used in the Toyota RAV4 EV traction motor cooling system?
Use ethylene-glycol type coolant, such as Toyota Long Life Coolant or an equivalent.
What brake fluid is specified for the Toyota RAV4 EV?
SAE J1703 or FMVSS No. 116 DOT 3 brake fluid.
What causes DTC 2846/22 on 1998 RAV4 EV vehicles?
Chemical deposit build-up around the battery terminals of the traction battery modules.
How long should technicians wait after removing the service plug before starting repairs?
At least 10 minutes must pass before any repair operation begins.
