Key facts
Start here

Siemens SINAMICS G120X VFD Operation Instructions
This document is the Operation Manual (操作说明) for the Siemens SINAMICS G120X family of variable frequency drives. It serves as a comprehensive guide for qualified personnel to install, wire, debug, and operate the drive in industrial automation applications.
The manual covers the entire lifecycle of the device, starting with basic safety instructions and legal information. It details the physical installation process, including mounting options like wall-through technology and optional components such as power filters and I/O expansion modules. A significant portion is dedicated to wiring procedures for power supplies, motors, and various control interfaces including PROFINET, EtherNet/IP, Modbus RTU, USS, and PROFIBUS. This manual is written in Chinese.
Siemens SINAMICS G120 specifications
| Power Range | 0.75 kW ~ 560 kW |
|---|---|
| Input Voltage (FSA...FSG) | 3 AC 380 V (-20 %) ... 440 V (+10 %) |
| Input Voltage (FSH/FSJ) | 3 AC 380 V (-15 %) ... 440 V (+10 %) |
| Operating Temperature (FSA...FSG) | -20 ºC ~ 60 ºC |
| Operating Temperature (FSH/FSJ) | 0 ºC ~ 50 ºC |
| Digital Inputs | 6 channels |
| Digital Outputs | 4 relay outputs, 250V AC 1A / 30V DC 1A |
| Analog Inputs | 2 channels (-10 V ~ 10 V ; 0/4 ~ 20 mA) |
| Analog Outputs | 2 channels (0 V ~ 10 V ; 0/4 ~ 20 mA) |
| Protection Class | IP20, IP00 (FSJ size only) |
Source: Siemens SINAMICS G120XA Vector Converter Fan and Pump Application Brochure
All Siemens SINAMICS G120 documents by type
Disassembly, diagnostics and part numbers, for repair.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
- Siemens SINAMICS G120 CU240B/E-2 Parameter Manual 762 p
- Siemens SINAMICS G120 Low Voltage Inverter Operating Instructions 534 p
- Siemens SINAMICS G120X VFD Operation Instructions 1270 p
- Siemens SINAMICS G120C VFD Operation Manual 512 p
- Siemens SINAMICS G120 Inverter with CU240B-2/CU240E-2 Control Units Operating Instructions 458 p
- SIEMENS SINAMICS G120 Control Units CU240S Getting Started 42 p
- Siemens SINAMICS G120 User Manual 64 p
- Siemens SINAMICS G120 User Manual 64 p
- Siemens SINAMICS G120 Frequency Transformer Manual 64 p
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
Which firmware versions are supported by this manual?
This manual applies to firmware version 4.5 for all listed control unit models.
What applications is the SINAMICS G120XA designed for?
It is specifically designed for fan and pump loads, including water treatment, heating networks, oil/gas/chemical industries, sewage treatment, subway ventilation, and HVAC.
From: Siemens SINAMICS G120XA Vector Converter Fan and Pump Application Brochure
Does the SINAMICS G120XA support specific motor types?
Yes, it supports induction motors, permanent magnet synchronous motors, and reluctance motors with high energy efficiency.
From: Siemens SINAMICS G120XA Vector Converter Fan and Pump Application Brochure
What are the safety notice levels defined in this manual?
The manual uses DANGER, WARNING, CAUTION, and NOTICE to indicate degrees of danger regarding personal safety or property damage.
From: Siemens SINAMICS G120 Low Voltage Inverter Operating Instructions
What firmware version is covered by these operating instructions?
These instructions cover the inverter running Firmware V4.7 SP10.
From: Siemens SINAMICS G120 Low Voltage Inverter Operating Instructions
What is the firmware version of this manual?
The document specifies Firmware Version V1.01.
