Key facts
Start here

Seagate ST225 10MB Hard Drive OEM Manual
This manual is the Seagate ST225 OEM manual, dated October 22, 1985, document number 36005-001, Rev. F. It describes the drive's specifications, host/drive interface, configuration, control signals, power-on sequence, data transfer, theory of operation, field service, and component locations.
The manual also includes figures, tables, and appendices, including a 32-sector, 256-byte/sector format example and a standard spares list.
Seagate ST225 specifications
| Capacity | 21/26 MB |
|---|---|
| Heads | 4 |
| Seek time / track | 65.0/20.0 ms |
| Sector/track | 17 |
| Controller | MFM / ST412 |
| Precompensation | 300 |
| Cache/Buffer | KB |
| Landing Zone | 670 |
| Data transfer rate | 0.625 MB/S |
| Bytes/Sector | 512 |
| Recording method | MFM |
| Supply voltage | 5/12 V |
| Temperature (operating) | 10 45 C |
| Humidity (operating) | 8 80 % |
| Altitude (operating) | -0.305 3.048 km |
| Shock (seek) | 10 g |
| Rotation | 3600 RPM |
| Power (standby) | 33.0 W |
| Power (read/write) | 33.0 W |
| MTBF | 100000 h |
| Warranty | Month |
| Cylinders | 615 |
| Defects (ST225) | 21 |
| Track-to-Track (ST225) | 20 msec |
| Average Access Time (ST225) | 65 msec |
| Average Access Time (ST225) max | 150 msec |
| Latency (ST225) | 8.33 msec |
All Seagate ST225 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What is the recommended precompensation setting for the ST225?
For optimum performance, precompensation is recommended for tracks 300 through 614.
Can the drive be mounted vertically?
Mounting vertically on either end is a prohibited orientation.
How much formatted capacity does the Seagate ST225 provide?
The introduction states the drive provides over 20 megabytes of formatted capacity; the specification summary lists 20.15 MB formatted.
Which interface does the ST225 use?
It supports the industry-standard ST412 interface, with the same voltage requirements for ease of integration.
Where are the specifications for the half-height 10MB drive located?
They can be found at the back of this manual.
What is the document number and revision of this manual?
36005-001, Rev. F.
