Key facts
- Brand
- PR electronics
- Model
- 4179
- Category
- Automation control Equipment
- Industry
- Industrial
- Documents
- 2
- Languages
- ZH
- Last added
- 2026-11-16
Start here

PR electronics 4179 Universal AC/DC Transmitter User Manual
The PR electronics 4179 is a universal AC/DC transmitter that measures AC current and voltage signals and converts them into single or bipolar DC current and voltage signals. It supports passive or active current output and can be configured using the PR 4511/4501 display and programming panel.
This user manual contains safety instructions, installation and commissioning procedures, wiring methods, block diagrams, technical parameters, and menu flowcharts for operating and configuring the 4179 transmitter. This manual is written in Chinese.
PR electronics 4179 specifications
| Operating temperature | -20°C to +60°C |
|---|---|
| Storage temperature | -20°C to +85°C |
| Relative humidity | < 95% RH (non-condensing) |
| Protection rating | IP20 |
| Dimensions (H x W x D) | 109 x 23.5 x 104 mm |
| Weight | approx. 155 g |
| Supply voltage | 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC |
| Max. power consumption | ≤ 1.8 W (rated), ≤ 2.5 W (max.) |
| Isolation voltage, test | 2.3 kVAC |
| Response time | < 0.75 s |
| Accuracy | better than 0.3% |
| Signal-to-noise ratio | > 60 dB |
| Current output load | up to 800 ohm |
| DIN rail type | DIN EN 60715 - 35 mm |
Source: PR electronics 4179 Universal AC/DC Transmitter Manual (4179V102-CN)
All PR electronics 4179 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How do I remove the PR 4500 display/programming panel?
Press the release button at the bottom of the PR 4500, lift it slowly upward, then pull its tab out of the hole at the top of the device.
From: PR electronics 4179 Universal AC/DC Transmitter Manual (4179V102-CN)
What kind of DIN rail must the 4179 be mounted on?
The 4000 series must be installed on a DIN rail that complies with DIN EN 60715 (35 mm).
From: PR electronics 4179 Universal AC/DC Transmitter Manual (4179V102-CN)
What is the response time of the PR electronics 4179?
The response time is less than 0.75 seconds.
From: PR electronics 4179 Universal AC/DC Transmitter User Manual
What power supply does the 4179 use?
It uses a universal power supply of 21.6…253 VAC or 19.2…300 VDC.
From: PR electronics 4179 Universal AC/DC Transmitter User Manual
