Key facts
- Brand
- Maxwell
- Model
- 1.28
- Category
- Other
- Industry
- Appliances
- Documents
- 4
- Languages
- EN
- Last added
- 2026-11-08
Start here

MAXWELL 1.28 HET Toilets with 3-Inch Flush Valves Directions for Tank to Bowl Assembly
MAXWELL 1.28 HET toilets with 3-inch flush valves are supplied with directions for assembling the tank to the bowl. The instructions cover checking valve nuts, installing tank bolts and washers, placing channel pads, leveling the tank, connecting the water supply, and adjusting the water level.
Notes warn against exposing plastic trim to strong oxidizing agents, chlorine, or acid levels below pH 5.0, and against using putty or pipe dope. The fill valve coupling nut must be hand tightened only, and the chain should have slight slack at rest.
MAXWELL 1.28 specifications
| Toilet type | High-efficiency (1.28) |
|---|---|
| Flush valve size | 3 inches |
| Plastic trim exposure | Not below pH 5.0 |
Source: MAXWELL 1.28 HET Toilets with 3-Inch Flush Valves Directions for Tank to Bowl Assembly
All MAXWELL 1.28 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
Can putty be used when assembling the tank to the bowl?
No, the instructions say to use no putty.
From: MAXWELL 1.28 HET Toilets with 3-Inch Flush Valves Directions for Tank to Bowl Assembly
How should the fill valve coupling nut be tightened?
It should be hand tightened only, and pipe dope should not be used.
From: MAXWELL 1.28 HET Toilets with 3-Inch Flush Valves Directions for Tank to Bowl Assembly
Should putty be used when installing the tank?
No. Use no putty; all parts are supplied and the tank bolts are already sealed.
From: MAXWELL 1.28 Toilet 3-Inch Flush Valve Tank to Bowl Assembly Installation Guide
How should the plastic wing nuts be tightened?
Tighten them by hand sufficiently to compress the rubber washers and prevent the tank from rocking.
From: MAXWELL 1.28 Toilet 3-Inch Flush Valve Tank to Bowl Assembly Installation Guide
