Key facts
- Brand
- Kawasaki
- Model
- KJ155
- Category
- Industrial Robot
- Documents
- 2
- Languages
- EN
- Last added
- 2023-10-19
Start here
Kawasaki KJ155/125 Robot Installation and Connection Manual
This document serves as the Installation and Connection Manual for the Kawasaki KJ155/125 painting robot. It details the necessary procedures for installing the robot arm, including transportation and storage precautions, installation environment requirements, and specific safety measures for explosion-proof models.
The guide covers the installation workflow, base dimensions, and space requirements. It also provides specific instructions for connecting the air system and removing protection sheets for mirror-surfaced wrist specifications. Special attention is given to explosion-proof specifications for Japan, China, North America, and Europe, including scavenging tube connections and gage calibration methods.
Kawasaki KJ155 specifications
| Ambient Operating Temperature | 0°C to 40°C |
|---|---|
| Relative Humidity | 35% to 85% RH |
| Floor Horizontal Surface | +5° |
| Air Supply Pressure (Japan/China/NA) | 0.4 to 0.7 MPa |
| Air Supply Pressure (Europe) | 0.5 to 0.7 MPa |
Source: Kawasaki KJ155/125 Robot Installation and Connection Manual
All Kawasaki KJ155 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What are the applicable robot models for this manual?
The manual applies to KJ155m-BO, KJ155m-B4, KJ125m-BO, and KJ125m-B4.
From: Kawasaki KJ155/125 Robot Installation and Connection Manual
Can a person ride on the robot during transport?
No, during transport never allow a person to ride on the robot.
From: Kawasaki KJ155/125 Robot Installation and Connection Manual
What are the precautions for transporting the robot?
Never allow a person to support the robot, ride on it, or get under it when suspended. Avoid impact or shock during transport.
From: Kawasaki KJ155/125 Robot Installation and Connection Manual
What is the required installation environment for the robot?
The location must maintain a horizontal surface within +5°, have adequate floor hardness, and be free of dirt, dust, oil, smoke, or water.
From: Kawasaki KJ155/125 Robot Installation and Connection Manual