Genie Z-45 25J Manuals

ManualLib has 2 documents for the Genie Z-45 25J: 2 user manuals. Every file can be read online or downloaded as a PDF for free.

User Manual 2

Key facts

Brand
Genie
Model
Z-45 25J
Documents
2
Languages
EN · ES
Last added
2023-10-18

Start here

Genie Z-45 25/Z-45 25J Operator's Manual

Genie Z-45 25/Z-45 25J Operator's Manual

User Manual 60 pages · 4 MB · EN

This manual provides safety guidelines, operating instructions, and maintenance procedures for Genie’s Z-45 25 and Z-45 25J aerial lifts. It includes hazard symbols, pre-operation checks, and detailed specifications for both base and jib models. The document emphasizes operator training and safety compliance to prevent injury or equipment damage.

The Z-45 25J model has a maximum platform height of 46 ft 2 in and a horizontal reach of 25 ft 1 in, while the Z-45 25 has a maximum platform height of 45 ft 11 in and a horizontal reach of 125 ft. Both models support a maximum load capacity of 500 lbs (227 kg) and operate on 12V DC proportional controls with hydraulic pressure up to 3200 psi.

Read online

Genie Z-45 25J specifications

Height, working maximum (Z-45/25)51 ft 11 in (16 m)
Height, platform maximum (Z-45/25)45 ft 11 in (14 m)
Horizontal reach maximum (Z-45/25)125 ft (17.62 m)
Maximum load capacity (Z-45/25)500 lbs (227 kg)
Maximum wind speed28 mph (12.5 m/s)
Platform rotation (Z-45/25J)160 degrees
System voltage12V
Hydraulic pressure, maximum3200 psi (221 bar)
Fuel tank capacity17 gallons (64.4 liters)
Ground clearance, center15.5 in (39.4 cm)

Source: Genie Z-45 25/Z-45 25J Operator's Manual

All Genie Z-45 25J documents by type

User Manual 2

Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.

Questions answered in these manuals

What is the maximum platform height for the Z-45/25J model?

The maximum platform height for the Z-45/25J model is 46 ft 2 in (14.07 m).

From: Genie Z-45 25/Z-45 25J Operator's Manual

What is the maximum load capacity for the Z-45/25 model?

The maximum load capacity for the Z-45/25 model is 500 lbs (227 kg).

From: Genie Z-45 25/Z-45 25J Operator's Manual

Who is authorized to operate the machine?

Only personnel who are properly trained and authorized may use the machine.

From: Genie Z-45/25 Z-45/25J Z-51/30J Operator's Manual

What safety equipment is required for occupants?

Occupants must wear a safety belt or harness that meets current regulations.

From: Genie Z-45/25 Z-45/25J Z-51/30J Operator's Manual